Motion coding of image primitives

We introduce an algorithm for matching stationary or moving image primitive lines between adjacent frames of a video sequence. Starting from local measures of proximity and similarity of shape, the algorithm computes the distance between pairs of primitives. It has strategies for dealing with broken lines and various kinds of connections between lines. The output of the algorithm is used to control a motion coding system, where only unmatched threads need be transmitted. The system can function in a simple conditional replenishment mode, or with motion compensation. Experimental results are reported showing an improvement of compression rate of 2:1 between intraframe primitivebased coding and motion-compensated primitive-based coding.     

用光学联合变换方法对手写汉字进行分类识别

用光学联合变换方法，结合ＣＣＤ数据采集系统，对手写汉字进行统计分类识别，通过实验得出了各类别的相关峰值范围，其实验结果良好，有较大的应用前景。     

Dioxin emission factors for automobiles from tunnel air sampling in Northern Taiwan

This study measured PCDD/F concentrations in tunnel air and vehicle exhaust. The ambient air samples were collected with air samplers (Tisch PS-1) complying with USEPA TO-9A. The results indicate that the tunnel air had a PCDD/F TEQ concentration about two times as high as that of outside air (47.3 and 57.1 fg-I-TEQ/m3 for tunnel air vs. 37.1 fg-I-TEQ/m3 and 23.3 fg-I-TEQ/m3 for outside air, respectively). This provides the direct evidence that PCDD/F compounds are emitted from the combustion processes in gasoline- and diesel-fueled engines. According to the tunnel study, the emission factors ranged from 5.83 to 59.2 pg I-TEQ/km for gasoline vehicles and 23.32 to 236.65 pg I-TEQ/km of diesel vehicles. This indicates that the dioxin emission factor in Taiwan is lower than that measured in USA, Norway and Germany. When the speed of the diesel vehicle was set at 40 km/h, the dioxin concentration emitted from diesel vehicle was 278 pg/m3 (6.27 pg-I-TEQ/m3) from tailpipe testing. However, when the diesel vehicle was idled, the dioxin concentration increased greatly to 4078 pg/m3 (41.9 pg-I-TEQ/m3). From the results of tunnel air sampling, the PCDD/Fs emission from automobiles in Taiwan was estimated as 3.69 g I-TEQ per year.     

A Chinese View on Summary of Condensed Matter Nuclear Science

Investigation on tritium was one of the recommendations in Energy Research Advisory Board (ERAB) report of U. S. Department of Energy (DOE) in November, 1989. Fifteen years evolution of the related research proved that it was an important recommendation. A selective resonant tunneling model is attempted to explain this discovery. Deuterium flux might be a key issue to solve the problem of the reproducibility. A further investigation is suggested based on this model.     

Use of dual-grating sensors formed by different types of fiber Bragg gratings for simultaneous temperature and strain measurements

We report on a systematic investigation of the dependence of both temperature and strain sensitivities on the fiber Bragg grating type, including the well-known Type I, Type IIA, and a new type that we have designated Type IA, using both hydrogen-free and hydrogenated B/Ge codoped fibres. We have identified distinct sensitivity characteristics for each grating type, and we have used them to implement a novel dual-grating, dual-parameter sensor device. Three dual-grating sensing schemes with different combinations of grating type have been constructed and compared, and that of a Type IA-Type IIA combination exhibits the best performance, which is also superior to that of previously reported grating-based structures. The characteristics of the measurement errors in such dual-grating sensor systems is also presented in detail.     

Crystallization during polymerization of selenium from the vapour phase

The kinetics of crystal growth of trigonal selenium from the vapour phase has been studied between 440.5 and 473.0K at vapour pressures ranging from 34.4 to 293 Pa. The crystal growth was found to be dependent upon the supercooling to the 2.5 power, in contrast to melt crystallization which has an exponential supercooling dependence. From the vapour pressure—growth rate correlation there is evidence that the active species in crystallization is Se₂. Crystallization of Se from the gas phase is an example of crystallization during polymerization.     

The computer simulation of wear behavior appearing in total hip prosthesis

Computer algorithms are proposed for the estimation of wear appearing in artificial hip joints using finite element analysis based on the modified Archard's wear law, contact features and an analogue wear process. A pin-on-disk plate experiment is reconstructed to assess the efficiency and validity of the algorithms proposed here. Through the successful verification of wear depth and volume loss of the pin-on-disk plate as well as the artificial hip joint, the current algorithms provide significant agreement with experiments, clinical measurements and numerical calculations and are shown to be both valid and feasible. Further investigation into the effect of femoral heads with various sizes suggests that the larger femoral head may induce larger wear volume but gives a smaller wear depth and that wear depth and volume loss are apparently nonlinearly related to the femoral head diameter. It is shown that the current algorithms are useful and helpful in understanding wear behavior for alternative or new designs of artificial hip joints and even for other analogous structures.     

Optical sensor based on Fabry-Perot resonance modes

An oscillating wave sensor based on Fabry-Perot resonance modes has been developed. Different from the surface plasmon resonance sensors and the waveguide mode sensors in which the sample is located in the evanescent field region, the proposed device contains the sample in the core region that supports the oscillating field. Owing to the strong concentration of the electromagnetic field in the sensing medium, the proposed device exhibits unusual sensitivity enhancement, which has never been exploited in any other devices.     

Modeling and computer simulation of ultrasonic/sonic driller/corer (USDC)

Simulation and analytical models for the ultrasonic/sonic drill/corer (USDC) are described in this paper. The USDC was developed as a tool for in-situ rock sampling and analysis in support of the NASA planetary exploration program. The USDC uses a novel drive mechanism, which transfers ultrasonic vibrations of a piezoelectric actuator into larger oscillations of a free-flying mass (free-mass). The free-mass impact on the drill bit creates a stress pulse at the drill tip/rock interface causing fracture in the rock. The main parts of the device (transducer, free-mass, bit, and rock) and the interactions between them were analyzed and numerically modeled to explore the drive mechanism. Each of these interactions is normally described by a time-dependent 2- or 3-D model involving slowly converging solutions, which makes the conventional approach unsuitable for USDC optimization studies. A simplified integrated model using tabulated data was developed to simulate the operation of the USDC on desktop PC and successfully predicted the characteristics of the device under a variety of conditions. The simulated results of the model and the experimental data used to verify the model are presented.     

Gelatin manipulation of latent macropores formation in brushite cement

Macroporous brushite cement was prepared from a mixture of -tricalcium phosphate (-TCP) and monocalcium phosphate monohydrate (MCPM) using gelatin powder as a latent templates. In a setting reaction coexisting with gelatin, closed packed, open-pore structure with 100–200 m macropores are obtained after immersion of the set cement into PBS buffer (pH 7.4) at 37 °C for 1–4 weeks. The macroporous brushite cement has compressive strength of 15 MPa originally, which reducing to 5.5 MPa with macropore formation gradually in comparison to that of cancellous bone (5–10 MPa).