CVD synthesis of graphene nanoplates on MgO support

Synthesis of graphene directly on MgO has been carried out and the structural properties of the obtained material have been investigated. Few-layered graphene was produced by simple thermal decomposition of methane over MgO powder at 950 °C in a CVD reactor. The samples were purified by 10 N HNO₃ treatment, and studied by TEM, Raman spectroscopy, EDAX and SEM. TEM clearly indicated the formation of graphene. EDAX showed that the purified sample contained only carbon and no traces of MgO. The characteristic Raman features of graphene were also seen as D-band at 1316 cm^?1, G-band at 1602 cm^?1, and a small 2D-band at 2700 cm^?1 in the Raman spectra. The strong D-band suggests that the graphene possess large number of boundary defects. The small 2D-band indicates the formation of few-layered graphene.     

Properties of p- and n-Type PbTe Microwires for Thermoelectric Devices

In thermopower measurements, microwires fabricated from as-purchased bulk PbTe exhibits p-type behavior between room temperature and ～600 K. At higher temperatures, it undergoes majority carrier inversion and exhibits n-type behavior. We report on the preparation and properties of potassium oxide and Zn-doped PbTe microwires, which exhibit stable p- and n-type behavior, respectively, between room temperature and 725 K. Thermoelectric figures of merit (ZT) are reported for device components prepared from bundles of such p- and n-type microwires in a glass matrix.     

A decision-making approach for energy efficiency improvement in municipal water pumps during water scarcity scenario

Cities in Sub-Saharan Africa suffer from widespread disparities in water supply due to depletion in groundwater and global-warming-induced changes in weather patterns. The offset of water head from the design considerations of water pumping systems has increased energy requirements leading to worsening of the situation with respect to availability of energy and water. Consequently, highly capitalized water supply schemes, which have been designed to meet the demand, are underutilized leading to operational inefficiencies. Robust empirical equations can help detect inefficiencies in water pumping systems, and this paper discusses the equations which were developed by analysing data obtained from various water supply utilities facing water scarcity. These equations provide cost-benefit analysis for decision making in water utilities and can bring about energy efficiency in municipal pumping operations.     

Flat Absorber Phosphorous Black Nickel Coatings for Space Applications

A new process of flat absorber black nickel alloy coating was developed on stainless steel by electrodeposition from a bath containing nickel,zinc and ammonium sulphates;thiocyanate and sodium hypophosphite for space applications.Coating process was optimized by investigating the effects of plating parameters,viz concentration of bath constituents,current density,temperature,pH and plating time on the optical properties of the black deposits.Energy dispersive X-ray spectroscopy showed the inclusion of about 6% phosphorous in the coating.The scanning electron microscopy studies revealed the amorphous nature of the coating.The corrosion resistance of the coatings was evaluated by the electrochemical impedance spectroscopy (EIS) and linear polarization (LP) techniques.The results revealed that,phosphorous addition confers better corrosion resistance in comparison to conventional black nickel coatings.The black nickel coating obtained from hypophosphite bath provides high solar absorptance (α s) and infrared emittance (ε IR) of the order of 0.93.Environmental stability to space applications was established by the humidity and thermal cycling tests.     

Thermal and Mechanical Properties of ACoO3 (R = Sm, Tb, Dy, Ho, and Er)

The thermal and mechanical properties of orthocobaltates, ACoO₃ (A = Sm, Tb, Dy, Ho, and Er), have been investigated using the modified rigid ion model (MRIM) by incorporating the effect of lattice distortions. We have computed the variations of specific heat and thermal expansion coefficient for these orthocobaltates in wide temperature range of 1 K (?272 °C) ≤ T ≤ 1000 K (727 °C). The calculated results of specific heat, thermal expansion, bulk modulus, and other thermal and mechanical properties accord very well with the available experimental data, implying that MRIM represents properly the nature of the perovskite-type rare earth cobaltates. In addition, we have also reported the results on molecular force constant (f), Reststrahlen frequency (υ), cohesive energy (?), Debye temperature (θ _D), and Gruneisen parameter (γ).     

WO3 nano-ribbons: their phase transformation from tungstite (WO3·H2O) to tungsten oxide (WO3)

Tungsten oxide (WO₃) nano-ribbons (NRs) were obtained by annealing tungstite (WO₃·H₂O) NRs. The latter was synthesized below room temperature using a simple, environmentally benign, and low cost aging treatment of precursors made by adding hydrochloric acid to diluted sodium tungstate solutions (Na₂WO₄·2H₂O). WO₃ generates significant interests and is being used in a growing variety of applications. It is therefore important to identify suitable methods of production and better understand its properties. The phase transformation was observed to be initiated between 200 and 300 ^°C, and the crystallographic structure of the NRs changed from orthorhombic WO₃·H₂O to monoclinic WO₃. It was rigorously studied by annealing a series of samples ex situ in ambient air up to 800 ^°C and characterizing them afterward. A temperature-dependent Raman spectroscopy study was performed on tungstite NRs between minus 180 and 700 ^°C. Also, in situ heating experiments in the transmission electron microscope allowed for the direct observation of the phase transformation. Powder X-ray diffraction, electron diffraction, electron energy-loss spectroscopy, and X-ray photoelectron spectroscopy were employed to characterize precisely this transformation.     

Viscoelastic properties of borax loaded CMC‐g‐cl‐poly(AAm) hydrogel composites and their boron nutrient release behavior

Borax (Na₂B₄O₇, 10.5% Boron) loaded CMC‐g‐cl‐poly(AAm) hydrogel composites were prepared by in situ grafting of acrylamide on to sodium carboxymethyl cellulose in the presence of borax by free radical polymerization technique to develop slow boron (B) delivery device. The composition, morphology, and mechanical properties of synthesized composites were studied by X‐ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, texture analyser, and dynamic shear rheometer. Characterization revealed formation of borate ion ( ) from borax during polymerization reaction leading to extensive crosslinking of cellulosic chains and generation of mechanically strong composite hydrogels. Dynamic release of from the synthesized composites hydrogels followed Fickian diffusion mechanism and composites with high mechanical strength resulted in slow release of B. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43969.     

Solar/visible light photocatalytic dye degradation using BaTi1−xFexO3 ceramics

BaTi_1−xFe_xO₃ compositions (for x = 0, 0.1, and 0.2) were prepared via a solid-state reaction route. The presence of iron (Fe) in barium titanate (BaTiO₃) eventually decreased the energy bandgap; thus, its utilization for water cleaning application through photocatalysis process was explored (using methylene blue [MB] dye as an indicative pollutant in water). Characterization of the synthesized powder was performed through scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy. The bandgap of the synthesized powder was calculated as 3.2, 2.12, and 1.67 eV for BaTi_1−xFe_xO₃ compositions (for x = 0, 0.1, and 0.2), respectively. BaTi_0.8Fe_0.2O₃ powder showed excellent results, and ∼71% of the MB dye (∼5 mg/L concentrated) was degraded using the photocatalysis process under visible light. To check the potentiality of BaTi_1−xFe_xO₃ compositions (for x = 0, 0.1, and 0.2), the photocatalysis process was carried out by changing the concentration of MB dye (2.5–10 mg/L with a step of 2.5 mg/L) and the amount of BaTi_0.8Fe_0.2O₃ powder (0.05–0.2 g with a step of 0.05 g) for ∼5-mg/L concentrated MB dye. The treated water was further used as a growth parameter and phytotoxicity analysis through germination index on the wheat seeds. Lastly, the BaTi_1−xFe_xO₃ compositions (for x = 0, 0.1, and 0.2) were explored for water cleaning applications under real-time solar irradiation.     

Improved device performance based on crosslinking of poly (3-hexylthiophene)

Diode devices (glass/ITO/polymer/Al) have been fabricated using poly (3-hexylthiophene) (P3HT) crosslinked with two different biaryl crosslinkers. Crosslinking was performed by exposing the thin films with different wt% of crosslinker to UV irradiation and progress of crosslinking was monitored by IR spectroscopy. An increase in hole mobility of two orders of magnitude has been observed after crosslinking.     

Metal-carbonate formation from ammonia solution by addition of metal salts—An effective method for CO2 capture from landfill gas (LFG)

The absorption of CO₂ from LFG in different weight concentration ammonia solution and metal salts (Zinc and Barium) is investigated in this study. Addition of metal salts results in useful metal carbonates when LFG is passed through the solution. Barium salts show a better potential of removing CO₂ as compared to Zinc salts. Addition of Barium salts to ammonia solution results in a new absorbent as no study has been focused on it till date. Also metal salts are added to alkaline wastewater which not only decreases the pH of the wastewater but also useful metal carbonates are obtained from wastewater when LFG is passed through it. Different parameters like CO₂ loading, reaction rate and change in pH are investigated. Formation of carbonates is proved by using SEM and XRD analysis. Raman spectroscopy was performed on the discarded liquid after removal of carbonates to understand the formation of bicarbonates, carbonates and carbamates.