Improvements to the structural condition index (SCI) for pavement structural evaluation at network level

Structural evaluation provides valuable information about the expected behaviour and response of pavements and can be used at the network level of pavement management to prioritise projects. The falling weight deflectometer (FWD) can be used to identify the beginning and end of management sections and group pavement sections with similar structural capacities. The structural condition index (SCI) was developed as a screening tool for the pavement network-level evaluation, and the FWD data are used to determine the SCI. For the successful implementation of the SCI concept at the network level, one of the critical issues is the accuracy of the index. This article evaluates the accuracy of the SCI and also discusses a concept and procedure how to improve the SCI and its algorithm for low-volume flexible pavements. A case study (Texas) illustrates that the original SCI algorithm underestimates the existing structural condition, resulting in overestimated treatments in the pavement maintenance and rehabilitation.     

Adhesion between polymer surface modified by graft polymerization and tissue during surgery using an ultrasonically activated scalpel device

In the field of surgery, achieving adhesion between a polymer implant and tissue poses a challenge considering that suturing is not appropriate for the stability of such implants. An ultrasonically activated scalpel that generates heat by mechanical vibration and promotes adhesion between a polymer implant and native tissue by pressing the two materials together has very good potential for application in the field. To determine the type of polymer that is suitable for the purpose, we investigated polyethylene (PE) and polystyrene (PS) films, the surfaces of which were activated by corona discharge. Graft polymerization was then performed on the corona‐treated surfaces to vary their properties. The corona‐treated PE and PS films grafted with poly(acrylic acid), poly(methacrylic acid), poly(vinyl benzylacrylic acid), and poly(hydroxylethyl acrylate), respectively, adhered to the tissue when the ultrasonically activated scalpel was applied. The heat generated by the mechanical vibration and the applied pressure enabled the carboxyl or hydroxyl groups to bond with the proteins in the extracellular matrix. We therefore concluded that it was possible to integrate this technique in the development of new types of polymer devices that could be stably implanted in a living body. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40885.     

Potential Chemical Markers for the Identification of Irradiated Sausages

Abstract: Hydrocarbons, gas compounds, and off‐odor volatiles were determined for irradiated (0 or 5 kGy) commercial sausages with different fat contents (16% and 29%) during a 60‐d storage period at 4 °C. Total of 4 hydrocarbons (C14:1, C15:0, C16:2, and C17:1) were detected only in irradiated sausages: the amount of C16:2 was the highest, followed by C17:1, C14:1, and C15:0. The concentrations of hydrocarbons decreased significantly (P < 0.05) with storage, but were still detectable at the end of 60‐d storage. Irradiated sausages produced significantly higher amounts of CO than the nonirradiated ones. CH₄ was detected only in irradiated sausages. Dimethyl disulfide was detected only in irradiated sausages and its concentration decreased significantly (P < 0.05) with storage. Fat content of sausages showed a significant effect on the production and retention of hydrocarbons, gas compounds, and sulfur volatiles in irradiated sausages during storage. Some hydrocarbons (C16:2, C17:1, C14:1, and C15:0), CH₄, and dimethyl disulfide were only found in irradiated sausages indicating that these compounds can be used as potential markers for irradiated sausages.     

Influence of the duty cycle on structural and mechanical properties of oxide layers on Al-1050 by a plasma electrolytic oxidation process

Oxide layers were prepared on Al-1050 substrates by an environmentally friendly plasma electrolytic oxidation process using an alkaline solution of Na₂SiO₃ (8 g/L) and NaOH (3 g/L) as the electrolyte. The effects of three different duty cycles (20%, 40%, and 60%) on the structure and hardness of the oxides were investigated. XRD analysis revealed that the oxides were mainly composed of α-Al₂O₃, γ-Al₂O₃, and mullite. The proportion of each phase depended on various electrical parameters, such as the duty cycle and frequency. The morphology, thickness, and the elemental distribution of the oxides were examined by scanning electron microscopy and energy dispersive spectroscopy. The thicknesses of the oxides were found to vary from 20 μm to more than 60 μm for various duty cycles, when identical treatment durations were used. The oxidation treatment also resulted in good adhesion between the oxide layer and the substrate. SEM images indicated that the oxide layers formed at the 60% duty cycle exhibited relatively coarser surfaces with larger pore sizes and sintering particles, and slower growth rates than did those formed at the 20% duty cycle, under identical treatment durations. The oxides prepared at the 20% duty cycle showed smooth surfaces. The oxides layers were found to improve the micro-hardness of Al-1050. In particular, the oxide layers formed at the 40% duty cycle exhibited relatively better micro-hardness owing to their compact microstructures.     

Investigation of the crystallization process and crystal structure of Si-incorporated GeSb phase-change films

The effect of Si incorporation on the crystallization process and crystal structure of Te-free Sb-rich GeSb was investigated in this study. Si concentrations were controlled to 0, 5.1, 9.3, and 12.8 at.% by controlling the sputtering power of the GeSb alloy target (20:80 at.% for Ge:Sb) and Si target. After film deposition, the crystallization process and crystal structure were investigated. Crystallization temperature increased from 320 to 400 °C and the overall crystallinity was decreased with increasing Si concentration. These were analyzed by sheet resistance measurements after thermal annealing and optical contrast measurements by optical static testing. Glass transition temperatures were calculated and increased from 240 to 285 °C with increasing Si concentration. Considering the proportional relation between the glass transition temperature and crystallization temperature, it is thought that more energy is required for crystallization with increased Si concentration. A study of the crystallization process kinetics was conducted by applying the Johnson–Mehl–Avrami model to the optical static test results, which were carried out under a pseudo-isothermal process. The Avrami coefficient was 4.10 and decreased to 3.18 when the crystallization was generated with increased Si concentration from 0 to 12.8 at.%. Therefore, crystallization speed was thought to decrease with increased Si concentration. Based on the results of crystal structure analysis by XRD and HRTEM, the crystal structure of our Sb-rich GeSb PCM was revealed to be a typical Sb structure, i.e., an A7 hexagonal structure with lattice parameters of a = 4.26 Å and c = 11.45 Å. No crystal phase of Ge or Si was observed and no evidence of the structure change in Sb crystals due to Ge or Si incorporation was observed.     

Electrically assisted stress relief annealing of automotive springs

Journal of Mechanical Science and Technology - In the present study, Electrically assisted (EA) stress relief annealing for automotive springs is experimentally investigated. A concept of EA stress...     

Thermal management of solar cells using a nano‐coated heat pipe plate: an indoor experimental study

With temperature increasing, the photovoltaic efficiency of solar cells is reduced significantly. Such an efficiency loss may offset the efficiency improvement because of the development of the photovoltaic technology. This paper provides a novel approach for efficiency loss recovery of solar cells. Specifically, a nano‐coated heat pipe plate was integrated with the solar panel to remove heat from the hotspots on solar cells. This study concerns the indoor experiments of a commercial solar cell thermally managed with a heat pipe plate. The temperature rise and non‐uniformity on the solar panel were quantified in different light irradiances. With thermal management by the heat pipe plate, the solar panel shows a temperature‐rise reduction of 47–50%. This implies that half of the efficiency loss of the solar cell can be recovered. In addition, the temperature variation within the solar panel is reduced to 1.0–2.5 °C, which is beneficial in prolonging the longevity of the solar cell. In the experiments, the heat pipe plate can provide a cooling flux of 380 W/m² with light irradiance below 1000 W/m². By incorporating the heat pipe plate with a water jacket, the heat removal flux could be improved to 600 W/m², leading to a solar cell temperature of a few degrees higher than the ambient. Copyright © 2016 John Wiley & Sons, Ltd.     

Interpretation and diagnosis of fouling progress in membrane bioreactor plants using a periodic pattern recognition method

Fouling is a principal constraint of membrane bioreactors (MBRs). It blocks the wide use of MBRs and aggravates the ability of MBRs. Trans-membrane pressure (TMP) is measured simply from MBRs and is a useful factor for evaluating fouling phenomena such as fouling mechanisms. Fouling mechanism diagnosis based on a measured TMP was used to evaluate MBRs operation conditions. However, diagnosis of MBR conditions is difficult due to the dynamic conditions of MBRs. Therefore, we used differential calculus, exponential weighted moving average (EWMA) and fast Fourier transform (FFT) to determine a periodic pattern for diagnosing fouling mechanisms in the dynamic operating conditions of MBRs. The periodic pattern was reflected in the operating conditions of MBRs, based on the fouling mechanism using TMP. We used two data sets obtained from pilot-scale MBR to suggest a periodic pattern and validated the proposed method using a lab-scale MBR experiment. Consequently, the suggested periodic pattern can diagnose fouling mechanisms using the proposed method, because the methods can be adjusted under the dynamic conditions of MBRs.