Syntheses and reactions of urethanes of cellobiose and cellulose-containing uretdione groups

Urethanes of cellobiose and cellulose-containing uretdione groups are synthesized by the reaction of aliphatic and aromatic diisocyanate uretdiones with the saccharides. The syntheses are performed as a heterogeneous reaction in dimethyl acetamide using dibutyl tin dilaurate as a catalyst, as well as a homogeneous reaction in dimethyl acetamide-lithium chloride. Thus, Semisynthetic prepolymers are formed that offer the reactivity of (blocked) isocyanate groups. To demonstrate their reactivity, ring opening of the uretdiones is performed by the addition of a secondary amine to yield the corresponding ureas.     

From Molecular Clusters to Metal Nanoparticles

Different methods to prepare supported metal nanoparticles of uniform size are discussed. (i) Supported ruthenium particles were generated from Ru and Ru-Fe bimetallic molecular metal carbonyl cluster precursors (MCC). (ii) Gold nanoparticle formation in the supercage of Y zeolite was studied on Au/NaY, Au/HY and Au-Fe/HY system. (iii) Palladium nanoparticles were grown in liquid phase then deposited on an SiO₂ support or they were grown on the support surface in a solid-liquid interfacial layer. The particle size control was more efficient in the latter two cases than in the preparation starting from MCC.     

SOME ASPECTS OF THEORETICAL COMPARISON OF FISCHER-TROPSCH REACTORS

The reactor systems used for the Fischer-Tropsch synthesis, fixed bed, fluidized bed and slurry bed, are compared on the basis of space time yield (STY) and level of conversion obtainable under the same set of feed and operating conditions. The slurry bed and fluidized bed reactor were compared on the basis of a first order reaction model. The performance of these two reactors was found to be comparable at low values of WHSV, but at higher values of WHSV, the fluidized bed reactor gave higher conversions and STY. A power law kinetic expression was used to compare the performance of the slurry bed and fixed bed reactors. Higher conversions and STY were obtained from the fixed bed with varying WHSV. This may be due to the omission of the intra and inter phase mass transfer resistances in the modelling of the fixed bed reactor.     

Reversible electrochemical insertion of anions in poly-p-phenylene from aqueous electrolytes

Poly-p-phenylene (PPP) was synthesized from benzene according to the Kovacic method. Electrodes were made from this electronic insulator by cold- or hot-pressing of the loose, brown powder, under the addition of 7.5 wt. % soot (Corax L^®, Degussa AG). The electrochemical insertion and removal of anions HSO⁻₄, ClO⁻₄ in this material in aqueous solutions of the corresponding acids was investigated by slow cyclic voltammetry.

Initially, only a surface layer of about 0.1 mm thickness takes part in the electrochemical processes, which are reversible. A maximum concentration of anions in the solid of [(−C₆H₄−)⁺₇ A⁻] is attainable. The maximum degree of insertion is equal to 0.14. The insertion potential U_I shifts strongly into the negative direction with increasing concentration c of the acid. A linear U_I/c relationship is observed as in the case of graphite, where the intercalation potential is more positive by 20–200 mV for the same electrolyte. The round trip current efficiency for the insertion/removal cycle increases with increasing acid concentration attaining 100% in 14 M H₂SO₄ or 11.3 M CHlO₄. For a given concentration, increases in the same order as with graphite (H₂SO₄ < HClO₄ < HBF₄), being somewhat lower for a given electrolyte composition. From anodic current limitation (j_lim = 5–10 mA cm⁻²), a diffusion coefficient of about D = 2 × 10⁻⁷ cm² s⁻¹ is derived for the transport of anions in the bulk of PPP. The striking similarity of our results to former findings with graphite is thoroughly discussed. Some general conclusions are derived thereof.     

Gibt es eine Pflicht zum pr?natalen Nichtwissen?

Fall und Kommentare

Gibt es eine Pflicht zum pr?natalen Nichtwissen?     

Effect of Cation Substitution and Non-Stoichiometry on the Microwave Dielectric Properties of Sr(B'0.5Ta0.5)O3 [B'=Lanthanides] Perovskites

The Sr(B'_0.5Ta_0.5)O₃ ceramics where B'=La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Y, Er, and Yb have been prepared by the conventional solid-state ceramic route and their microwave dielectric properties have been investigated. The structure and microstructure of the ceramics have been characterized by X-ray diffraction and scanning electron microscope techniques. The relative permittiviy (ɛ_r) varies linearly with B'-site ionic radii, except for La, and the temperature coefficient of resonant frequency (τ_f) varies linearly with the tolerance factor. The Sr(B'_0.5Ta_0.5)O₃ ceramics have ɛ_r in the range 25.9–32, Q _u× f =4500–54 300 GHz, and τ_f=−79 to −42 ppm/°C. A slight deviation from stoichiometry affects the dielectric properties of these double perovskites. Partial substitution of Ba for Sr could tune the dielectric properties. Addition of rutile (TiO₂) lowered the sintering temperature and improved the dielectric properties of Sr(B'_0.5Ta_0.5)O₃ ceramics.     

Poly(styrene-b-isobutylene-b-styrene) block copolymer ionomers (BCPI) and BCPI/silicate nanocomposites. 2. NaBCPI sol-gel polymerization templates

Polystyrene (PS) blocks in poly(styrene-b-isobutylene-b-styrene) (PS-PIB-PS) block copolymers were partially sulfonated and the acid groups converted to Na⁺SO₃⁻ groups to create ionomers. Then, dimethylacetamide was used to selectively swell the ionic PS domains and the swollen films were exposed to sol-gel reactive tetraethylorthosilicate solutions. (EtO)_4−xSi(OH)_x monomers then permeated films so that sol-gel reactions occurred within/around the ionic PS domains. Environmental scanning electron microscopy/energy dispersive X-ray spectroscopy investigations showed that silicate structures can be incorporated within the interior of the ionomer films. Differential scanning calorimetry studies indicated that there is no variance in the PIB block T_g with respect to ionomer formation, or with respect to silicate loading of the ionomer at low levels, which suggests that the silicate component does not reside in the PIB phase. ²³Na solid state NMR spectroscopy detected isolated Na⁺SO₃⁻ groups as well as aggregated SO₃⁻Na⁺ ion pairs for ‘as cast’ and ‘dry’ non-silicate containing ionomer samples. In a hydrated sample, almost all Na⁺ ions were solvent-separated. AFM analysis showed that phase separation exists, but that the degree of order is significantly less than that for hybrids based on the corresponding benzyltrimethylammonium ionomer. This frustrated morphology was also seen in the results of small angle X-ray scattering experiments. Given the scale of organic/inorganic heterogeneity, these hybrids are properly classified as nanocomposites.     

Das deutsche Arzneimittelpatent – eine moralische Bewertung

Definition of the problem

This paper deals with the question whether the current German intellectual property right on pharmaceuticals is morally justifiable. To answer this question, I will map the relevant discourse and arrange the different positions with respect to their level of abstraction.

Arguments

I underline that both deontological and consequentialist arguments point out the moral deficits within the system.

Conclusion

The consequentialist position emphasizes the unsatisfying relationship between patented pharmaceutical costs and the number of innovations on the market. The deontological approach on the other hand highlights the dangers to citizens’ autonomy.

     

Macklins Substitutionsthese und der Begriff der Menschenwürde in der Bioethik

Definition of the problem

Ruth Macklin’s influential essay “Dignity is a useless concept” has revitalized a broad debate on the question whether the concept of dignity is meaningful in medical ethics. In this paper, I would like to examine Macklin’s so-called redundancy claim: according to this claim, the concept of human dignity can be replaced by other concept(s)—the concept of autonomy most prominent among them. What is the meaning of this claim?

Arguments

Starting from an analysis of Macklin’s arguments, I am going to show under which conditions a redundancy claim indeed leads to the eliminating consequences emphasized by its defenders—we should abandon the concept of dignity.

Conclusion

I am going to identify the advantages of her position both in comparison with more radical eliminative standpoints as well as positions that regard it as valid, but unanalyzable.