Morphology Controlled Magnesium Ethoxide: Influence of Reaction Parameters and Magnesium Characteristics

Controlled reaction of magnesium with ethanol was found to produce morphological magnesium ethoxide. The scanning electron microscopy studies indicate that particles of magnesium ethoxide grow on the surface of magnesium granules and are detached from the surface as a result of shearing and collisions during the reaction. Particle characteristics of magnesium show influence on the kinetics of the reaction as well as morphological characteristics of magnesium ethoxide. Impact of other process parameter variations on the magnesium ethoxide particle characteristics is also studied. The reaction rate, agitation speed, and type of agitator show influence on the product characteristics, whereas no influence of change in reaction pressure is observed.     

Dynamic compatibility testing of DMP 840, an experimental antitumor agent

The purpose of this study is to evaluate the potential for DMP 840, a novel experimental antitumor agent, to precipitate during injection or dilution with infusion solutions. The influence of predilution of the drug solution before injection and addition of buffers to the drug vehicle were also investigated. The compatibility of normal saline solution, pH 7.4 phosphate buffers, and human plasma with DMP 840 was examined in vitro under both static conditions and dynamic flow. The combination of DMP 840 solutions with normal saline solution resulted in conversion of the drug to an insoluble dihydrochloride salt. Under conditions of dynamic flow, precipitation, accompanied by large changes in turbidity, occurred at relatively high concentrations of the drug in the injection solution. Dilution of the injection solution below 2 mg/mL or slow injection avoided precipitation. As was the case with the normal saline system, turbidity changes after injection into protein-phosphate buffer (PPB) were dependent on the initial concentration of DMP 840 solution as well as the rate of administration. In addition, the maximum injection rate at which complete miscibility occurred increased exponentially as the drug injection solution was made more dilute. Buffering the DMP 840 injection solution with acetate buffer improved the miscibility of DMP 840 with PPB, which indicated that the turbidity increases were most likely due to conversion of the drug to its insoluble free base form. The observed effects of the buffer on the turbidity response agreed qualitatively with predictions from a graphical approach that considers the effects of dilution and pH changes on drug solubility. Despite these observations, no evidence for the formation of a solid precipitate could be found after injection of the unbuffered drug solution into PPB. Further investigation indicated that the presence of albumin in the PPB prevented the formation of a solid phase during injection. Likewise, fresh human plasma, spiked with 1 and 2 mg/mL solutions of DMP 840, showed no evidence for the formation of a solid precipitate.     

Aggregation in sensor networks: an energy–accuracy trade-off

Wireless ad hoc sensor networks (WASNs) are in need of the study of useful applications that will help the researchers view them as distributed physically coupled systems, a collective that estimates the physical environment, and not just energy-limited ad hoc networks. We develop this perspective using a large and interesting class of WASN applications called aggregation applications. In particular, we consider the challenging periodic aggregation problem where the WASN provides the user with periodic estimates of the environment, as opposed to simpler and previously studied snapshot aggregation problems. In periodic aggregation our approach allows the spatial–temporal correlation among values sensed at the various nodes to be exploited towards energy-efficient estimation of the aggregated value of interest. Our approach also creates a system level energy vs. accuracy knob whereby the more the estimation error that the user can tolerate, the less is the energy consumed. We present a distributed estimation algorithm that can be applied to explore the energy–accuracy subspace for a subclass of periodic aggregation problems, and present extensive simulation results that validate our approach. The resulting algorithm, apart from being more flexible in the energy–accuracy subspace and more robust, can also bring considerable energy savings for a typical accuracy requirement (fivefold decrease in energy consumption for 5% estimation error) compared to repeated snapshot aggregations.     

Parameterized algorithms for feedback set problems and their duals in tournaments

The parameterized feedback vertex (arc) set problem is to find whether there are k vertices (arcs) in a given graph whose removal makes the graph acyclic. The parameterized complexity of this problem in general directed graphs is a long standing open problem. We investigate the problems on tournaments, a well studied class of directed graphs. We consider both weighted and unweighted versions.     

Hydroisomerization of n-hexadecane over Brønsted acid site tailored Pt/ZSM-12

Hydroisomerization of n-hexadecane is performed over ZSM-12 framework having tailored Brønsted acidity to investigate the effect in terms of product selectivity and yield. For this purpose, pure phase of ZSM-12 (bulk molar ratio Si/Al ~ 60) has been synthesized using TEABr as a structure directing agent. The framework Brønsted acidity is tailored with group II elements (M) viz. Ca, Ba and Mg, by means of ion-exchange method. The samples so prepared have been characterized for phase purity, textural parameters, morphology by employing powder X-ray diffraction, nitrogen adsorption–desorption isotherm measurement at 77 K, and scanning electron microscopy technique, respectively. Similarly, % metal exchange is estimated using inductively coupled plasma technique. The quantification of Brønsted acidity for H⁺–M⁺⁺–ZSM-12 samples has been estimated by means of ammonia temperature programmed desorption (NH₃-TPD) and Fourier transform infrared spectroscopy of ammonia (NH₃-FTIR). The well characterized H⁺–M⁺⁺–ZSM-12 samples were loaded with Platinum (Pt, 0.5 wt%) and subjected to hydroisomerization of n-hexadecane using an up-flow fixed bed reactor to verify the effect of process parameters like temperature and WHSV. Pt/H⁺–Ba²⁺–ZSM-12 with tailored Brønsted acidity in the range of about 25 % demonstrated the optimum performance among all the catalysts with an increased isomer selectivity and yield (89.2 and 80.3 %, respectively) by about 4 wt% at a conversion level of about 90 % compared to Pt/H⁺–ZSM-12 framework at 568 K. Such enhancement in isomer selectivity and yield is found to be significant from commercial application point of view. Based on the obtained trend, the potential benefits of implementation of Pt/H⁺–Ba²⁺–ZSM-12 (bulk molar ratio Si/Al ~ 60) framework for cold flow property improvement of ‘bio-ATF’ have been envisaged.     

Growth and characterizations of dual ion beam sputtered CIGS thin films for photovoltaic applications

The growth of CIGS thin films on soda-lime glass substrates at different substrate temperatures by dual ion beam sputtering system in a single-step route from a single quaternary sputtering target with the composition of Cu (In_0.70 Ga_0.30) Se₂ was reported. The effects of the substrate temperature on structural, optical, morphological and electrical properties of CIGS films were investigated. Stoichiometry of one such film was investigated by X-ray photoelectron spectroscopy. All CIGS films had demonstrated a strong (112) orientation located at 2θ ~26.70^o, which indicated the chalcopyrite structure of films. The value of full-width at half-maximum of (112) peak was reduced from 0.58° to 0.19° and crystallite size was enlarged from 14.98 to 43.05 nm as growth temperature was increased from 100 to 400 °C. However, atomic force microscope results showed a smooth and uniform surface at lower growth temperature and the surface roughness was observed to increase with increasing growth temperature. Hall measurements exhibited the minimum film resistivity of 0.09 Ω cm with a hole concentration of 2.42 × 10¹⁸ cm^?3 and mobility of 28.60 cm² V^?1 s^?1 for CIGS film grown at 100 °C. Film absorption coefficient was found to enhance nominally from 1 × 10⁵ to 2.3 × 10⁵ cm^?1 with increasing growth temperature from 100 to 400 °C.     

Stick–slip friction of gecko-mimetic flaps on smooth and rough surfaces

The discovery and understanding of gecko ‘frictional-adhesion’ adhering and climbing mechanism has allowed researchers to mimic and create gecko-inspired adhesives. A few experimental and theoretical approaches have been taken to understand the effect of surface roughness on synthetic adhesive performance, and the implications of stick–slip friction during shearing. This work extends previous studies by using a modified surface forces apparatus to quantitatively measure and model frictional forces between arrays of polydimethylsiloxane gecko footpad-mimetic tilted microflaps against smooth and rough glass surfaces. Constant attachments and detachments occur between the surfaces during shearing, as described by an avalanche model. These detachments ultimately result in failure of the adhesion interface and have been characterized in this study. Stick–slip friction disappears with increasing velocity when the flaps are sheared against a smooth silica surface; however, stick–slip was always present at all velocities and loads tested when shearing the flaps against rough glass surfaces. These results demonstrate the significance of pre-load, shearing velocity, shearing distances, commensurability and shearing direction of gecko-mimetic adhesives and provide us a simple model for analysing and/or designing such systems.     

Nano and micro architectures for self-propelled motors

Self-propelled micromotors are emerging as important tools that help us understand the fundamentals of motion at the microscale and the nanoscale. Development of the motors for various biomedical and environmental applications is being pursued. Multiple fabrication methods can be used to construct the geometries of different sizes of motors. Here, we present an overview of appropriate methods of fabrication according to both size and shape requirements and the concept of guiding the catalytic motors within the confines of wall. Micromotors have also been incorporated with biological systems for a new type of fabrication method for bioinspired hybrid motors using three-dimensional (3D) printing technology. The 3D printed hybrid and bioinspired motors can be propelled by using ultrasound or live cells, offering a more biocompatible approach when compared to traditional catalytic motors.     

Acrylic acid–methyl methacrylate (2.5:7.5/2:8) enteric copolymer for colon targeted drug delivery

Enteric copolymers of acrylic acid and methyl methacrylate (2.5:7.5 and 2:8) were prepared using tetrahydrofuran as solvent and AIBN as free radical initiator for colon targeting. FTIR and ¹H NMR spectra of the copolymers showed absence of vinyl bond/protons present in the monomers suggesting successful polymerization. Flurbiprofen sodium microspheres (M1 and M2) made with the copolymers, by oil/oil solvent evaporation, were spherical, anionic (zeta potential –57.8 and –53.7 mV) and contained 5.47 and 5.89% drug. FTIR spectrum of microspheres showed peaks for aromatic C = C stretching and substituted benzene ring, indicating entrapment of flurbiprofen. PXRD revealed crystalline structure of flurbiprofen while copolymer and microspheres were amorphous. DSC thermograms showed a sharp melting endotherm of flurbiprofen sodium at 129.26°C against broad endotherms of copolymers and microspheres. The microspheres released 43 and 36% drug at pH 6.8 in 2 h and 99 and 96% at pH 7.4 in next 3–4 h.The microspheres did not adhere on gastric-mucosa at pH 1.2 but showed mucoadhesion time of 18 min and 9 min on intestinal mucosa at pH 6.8. Thus, the microspheres on oral administration, would release the drug in colon, suggesting the potential of the hemocompatible copolymers for pH dependent colon targeted drug delivery system.