Prediction of venturi scrubber efficiency used in an updraft gasifier cleaning train

The performance of a venturi scrubber in the removal of tar from gas in updraft gasification has been studied. The gasifier has been operated with a husk feed rate of 1.6 × 10^?4 kg/s. The venturi scrubber has been operated at a superficial gas velocity of 56.4 m/s at the throat. A wide variety of scrubbing liquids having surface tensions ranging from 0.026 to 0.072 N/m have been used. The Q_g/Q_l, has been varied in the range of 1000–8000. The tar separation efficiency η has been found to vary from 51 to 98.5%. A mathematical model, assuming steady-state operation, has been developed considering very high pseudosolubility of tar in the scrubbing liquids. The predicted values of η have been compared with experimental results. The model satisfactorily explains the tar removal efficiency of the venturi for Q_g/Q_l values ranging from 4000 to 8000 for all scrubbing liquids. The following correlation has been developed for predicting venturi scrubber efficiency: .     

Traumatogenic factors affecting the knees of carpet installers

An ergonomics analysis of carpet installation tasks was performed. The purpose was to identify and quality potential sources of biomechanical trauma that may be responsible for the high rates of knee morbidity found by previous researchers among carpet layers. Nine carpet layers were studied either at an apartment building worksite or at a training school. Results from a job analysis indicated that workers spent approximatately 75% of their time in the kneeling position using a tool called a knee-kicker to stretch and install carpet. Awkward body postures were identified from films of workers installing carpets. At the moment of impact the knee is severely flexed, subtended angles were less than 60 degrees. To obtain measures of impact force on the knee, the kicker-tool was instrumented with a load cell. Workers who executed the hardest kicks with the tool produced impact peak forces that averaged 3019 newtons (N), which is equivalent to about four times body weight. Measures from an accelerometer attached to the worker's knee showed values in ecxess of 120 m/s², which are comparable to those found during vigorous running and jumping exercises. The results imply that repetitive impact of the knee joint from the use of the knee-kicker combined with knee flexion, kneeling and squatting may be responsible for the high level of occupational knee-morbidity found among carpet layers.     

The initiation of crack growth in linear polyethylene

The initiation of crack growth was observed in single edge notched tensile specimens under plane strain conditions. The shape of the deformation zone varied from being balloon-like above 12 MPa and nearly planar below but neither shape conformed to that predicted by the conventional shear type yield criteria. The initial damaged zone grew at a constant velocity with a stress dependence ofV=V ₀ ⁿ . The spectrum of damage morphologies that preceed crack growth consists of a leading edge of crack-like pores followed by a region of increasing fibrillation which is terminated by a region of increasing fibril fracture.     

Cement mortar impregnated with poly(methyl methacrylate-co-styrene)

Polymer-impregnated mortars were prepared by copolymerization of a monomer mixture of methyl methacrylate and styrene in the ratios of 13:87 and 40:60 using Co-60 gamma radiation. The copolymerization characteristics viz. the rate of polymerization, the extent of monomer loss, polymer loading, etc., were studied. The nature and molecular weight of the extractable polymer from the composite were determined. The flexural strength of the copolymer-impregnated composites was found to be better than that of the composites impregnated with component homopolymers.     

Study of polyaniline polyacrylamide composites by positron annihilation technique

Polyaniline doped with nonoxidizing Bronsted acids is recognized as a conducting material, as its electrical conductivity changes with percentage of doping. In the present work, different percentages of doped polyaniline were blended with polyacrylamide and their electrical conductivities as well as the positron annihilation lifetimes were measured. Analysis of data yielded three lifetime components. It was observed that the value of the short lifetime component remained constant for doping concentration, whereas that of the intermediate component τ₂ decreased. The relative intensity pertaining to τ₂, however, increased with the increase in doped PANI concentration. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 930–933, 2003     

Benzoylation of benzene to benzophenone over zeolite catalysts

The liquid phase benzoylation of benzene with benzoyl chloride (BOC) to benzophenone is catalyzed by various zeolites at 353 K. Zeolite H-beta is found to be more active than the other zeolites. The conversion of benzoyl chloride to benzophenone over H-beta increases significantly with increase in the reaction time, temperature, catalyst/BOC (wt/wt) and benzene/BOC (mole) ratios. The yield of benzophenone decreases with increase in SiO₂/Al₂O₃ ratio and isomorphous substitution of Al-by Ga- and Fe-in zeolite H-Al-beta in the following order: Al-> Ga-> Fe-H-beta suggesting that high density of acidic centers along with strong acid sites are required for the reaction.     

A novel microfluidic switch for pH control using Chitosan based hydrogels

We report a novel pH-sensitive hydrogel based micro-valve for metered flow that has applications in a laboratory made “Intelligent valving system”. The hydrogel solution was prepared through Chitosan and poly vinyl alcohol in acetic acid and crystallized using gluteraldehyde as the crosslinking agent in the form of thin wafers and it was found to be very sensitive to pH changes. The pore structure of hydrogel was investigated through Field Emission Scanning Electron Microscopy and thin wafers of the gel were physically placed inside PDMS microchannels. Flow metering in these channels was observed by controlled expansion of the hydrogel plug till complete valving was realized. This valving device was further precisely characterized with micro Particle Image Velocimetry using a solution containing fluorescent polymeric micro beads. The principle advantage of this hydrogel device is the smaller range of pH (varying between pH 3 and 7) over which the valving response is observed.     

Scientific basis for establishing country greenhouse gas estimates for rice-based agriculture: An Indian case study

A comprehensive scientific assessment of CH₄ budget estimation for Indian rice paddies, based on a decade of measurements in India, is presented. Indian paddy cultivation areas contain soils that have low to medium levels of soil organic carbon. The average seasonally integrated CH₄ flux (E _sif) values calculated from these measurements were 15.3 ± 2.6 g m^–2 for continuously flooded (CF), 6.9 ± 4.3 g m^–2 for intermittently flooded (IF) single aeration (SA) and 2.2 ± 1.5 g m^–2 for IF multiple aeration (MA) rice ecosystems. For CF and IF (MA) rice ecosystems having high soil organic carbon, without organic amendments, the CH₄ flux (E _sif) may be increased by 1.7 times relative to low soil organic carbon, whereas it may enhance by 5.3 for CF if amended organically. Organic amendment and high soil organic carbon paddy areas do not alter the methane budget estimates for India (3.6±1.4 TgY^–1) much, due to their small paddy harvested area. Methane estimated using average emission factors (E _sif) for all paddy water regimes, which include harvested areas having soils with high organic carbon and organic amendments, may give a budget of 5 TgY^–1 for India.     

Preparation and characterization of low-halogen and nonhalgoen fire-resistant low-smoke (FRLS) cable sheathing compound from blends of functionalized polyolefins and PVC

An attempt is made to develop a novel series of cable sheathing compounds with variation in chlorine content and sufficient fire retardance and unique low-smoke characteristics. These are prepared by blending PVC and functionalized polyolefins in different compositions. PE and EPDM have been functionalized by grafting dibutyl maleate (DBM) using DCP as initiator. FRLS compounds made from PVC-functionalized polyolefin blends possess the special characteristics of low-smoke, low-acid-gas generation, increased fire retardance, and improved volume resistivity, which are much better in comparison with a typical PVC sheathing compound. Thermoplastic elastomer (TPE) based nonhalogen FRLS compounds are also reported. The mechanisms for grafting, polymer-polymer and polymer-filler interactions have been presented.