Design and simulation of a novel GaN based resonant tunneling high electron mobility transistor on a silicon substrate

For the first time, we have introduced a novel GaN based resonant tunneling high electron mobility transistor (RTHEMT) on a silicon substrate. A monolithically integrated GaN based inverted high electron mobility transistor (HEMT) and a resonant tunneling diode (RTD) are designed and simulated using the ATLAS simulator and MATLAB in this study. The 10% Al composition in the barrier layer of the GaN based RTD structure provides a peak-to-valley current ratio of 2.66 which controls the GaN based HEMT performance. Thus the results indicate an improvement in the current-voltage characteristics of the RTHEMT by controlling the gate voltage in this structure. The introduction of silicon as a substrate is a unique step taken by us for this type of RTHEMT structure.     

Microstructural design of neodymium-doped lanthanum–magnesium hexaaluminate synthesized by aqueous sol–gel process

Aqueous sol–gel processing was used to synthesize neodymium-doped magnesium hexaaluminate (La_1?x Nd _x MgAl₁₁O₁₉; x = 0, 0.3, 0.4, 0.5) ceramic powder and subsequently calcined at 1450 and 1600 °C for 2 h. Randomly grown platelets of lanthanum–magnesium hexaaluminate formed a porous interlocking structure. Presence of various percentages of neodymium oxide significantly modifies the porous interlocking microstructure into self-reinforced, card-house-like microstructure. Platelets of rare earth-rich magnesium hexaaluminate were grown preferentially more than the stoichiometric rare earth magnesium hexaaluminate at elevated temperature greater than 1450 °C. Rare earth-rich magnesium hexaaluminate platelets form the skeleton of a card-house structure and the tiny platelets of stoichiometric rare earth magnesium hexaaluminate fill the house. The specific heat capacities, micro-hardness, and fracture toughness were studied in details.     

A Novel RFET Sensor for Label-Free Biomolecule Detection

Silicon - In the current scenario, COVID-19 has created a havoc negative impact on the lives of the people, which have triggered the research interest on the design and development of sensitive,...     

Gas holdup in tapered bubble column using pseudoplastic non-Newtonian liquids

Experimental studies on the gas holdup in two tapered bubble columns using non-Newtonian pseudoplastic liquid have been reported. The effects of different variables such as gas flow rate, liquid viscosity, bed height, and orifice diameter of sieve plate on gas holdup have been investigated. An empirical correlation has been developed for the prediction of the gas holdup as a function of various measurable parameters of the system. The correlation is statistically acceptable.     

High vacuum tribology of polycrystalline diamond coatings

Polycrystalline diamond coatings have been grown on unpolished side of Si(100) wafers by hot filament chemical vapour deposition process. The morphology of the grown coatings has been varied from cauliflower morphology to faceted morphology by manipulation of the growth temperature from 700°C to 900°C and methane gas concentration from 3% to 1·5%. It is found that the coefficient of friction of the coatings under high vacuum of 133·32×10^?7 Pa (10^?7 torr) with nanocrystalline grains can be manipulated to 0·35 to enhance tribological behaviour of bare Si substrates.     

Electron microscopy of shock deformation in alumina

Shock recovered samples of a coarse grain (10 μm), high density (>99.9% theoretical) alumina from asymmetric impact tests conducted at 6.5 GPa (e.g. 3.2 times its Hugoniot Elastic Limit) in a single stage gas gun and characterized by X-ray diffractometry, scanning and field emission scanning electron microscopy, and transmission electron microscopy showed prolific presence of reduced crystallite size, higher average microstrain, grain localized micro/nano-scale deformations, micro-cleavages, grain-boundary microcracks, micro-wing crack formation, extensive shear induced deformations and fractures localized at grains, grain boundaries and triple grain junctions, grain localized entanglement of dislocations and their pile up impeded at grain boundaries. A new qualitative model based on micro-shear and micro-twist induced deformation and fracture in single and/or multiple planes in suitably oriented grain and/or grain assembly was developed to explain the experimentally observed damage evolution process.     

Template-free synthesis of flower-shaped zero-valent iron nanoparticle: Role of hydroxyl group in controlling morphology and nitrate reduction

Well-dispersed single phasic flower-like zero valent iron nanoparticles have been synthesized under aerobic conditions using a facile approach without the addition of any additives or templates. The role of hydroxyl groups of polyhydroxy alcohols in controlling surface morphology of nanoparticles has been thoroughly investigated. The obtained nanoparticles have been characterized by TEM, FE-SEM, XRD and BET surface area analyzer. Electron microscopy analyses reveal that the solvent plays a pivotal role in determining the morphology of the particles. With increase in viscosity of the solvent, formations of ‘petal-like’ structures, which are joined at the center are formed. The nitrate removal efficiency of the iron nanoparticles synthesized in different solvents has been studied and it is seen that the “flower-like” iron nanoparticles were most active in the removal of nitrate. Experiments have been done by varying (i) nitrate concentrations, (ii) nanoparticle dose, and (iii) type of nanoparticles. The results conclude that highest removal efficiency (～100%) was achieved when the nanoparticle dose was 2.88 g/L, even for high nitrate concentrations up to 400 mg/L. The major highlight of this work is the fact that even though the nanoparticles synthesized in glycerol-water mixture have larger size in comparison to the other nanoparticles, still they remove the nitrates with highest efficiency.”     

Indus Water Treaty: the Negotiating Process

ABSTRACT

For many arid and semiarid countries, international water bodies are the only new additional sources of water that could be economically developed to meet their ever increasing water requirements. Agreements between cobasin countries are necessary if such sources are to be developed promptly and properly. While some attempt is now being made to develop laws of nonnavigable uses of international watercourses, regrettably not enough attention has been paid thus far to review the negotiating processes that have led to successful water treaties. The present paper is an analysis of the negotiating process that resulted in the Indus River Treaty between India and Pakistan.     

Leak-before-break analysis of Prototype Fast Breeder Reactor main vessel

In Prototype Fast Breeder Reactor, the core is immersed in a sodium pool contained within the main vessel (MV). There is an argon cover gas space over the sodium. Top Shield supports the control plug which houses important components such as Control and Safety Rod Driving Mechanism. A core support structure welded to the bottom of MV carries the Grid plate which in turn supports the fuel subassemblies. MV is a cylindrical shell with a bottom dished end and supported at the top. Double ended guillotine rupture of MV will lead to downward movement of the core, which is in effect equivalent to withdrawal of control and safety rod and thus causing a series safety concern. It is essential to demonstrate Leak Before Break (LBB) argument for MV. LBB argument is justified if leak detection is ensured with adequate margin on critical crack length corresponding to failure by tearing instability. The material of construction of MV is SS316 LN. Towards assuring the justification of LBB argument, an isolated 5 mm deep X 200 mm long semi elliptical flaw is taken as the initial flaw and analysed under fatigue loading. A through wall crack in the argon space can be detected by sampling the nitrogen in the annular space between MV and safety vessel surrounding it. Accordingly the detectable crack length is arrived at. The critical crack length is obtained considering stable tearing. More details of the analysis and justification of LBB argument as per RCC-MR Appendix A16 are presented in the paper.