Metabolic factors have a major impact on kidney allograft survival

BACKGROUND: At the present time, late graft loss is the major cause of kidney failure after transplantation. However, the influence of metabolic factors on this process is ill-defined. METHODS: To identify the impact of lipid metabolism, glucose metabolism, and blood pressure and their prognostic value for graft survival, data for all recipients of a kidney allograft with a potential graft survival of >15 years and a minimum graft survival of 1 month were analyzed retrospectively. Recipients of kidney grafts functioning more than 15 years (n=32) were compared with those with a graft function of less than 10 years (n=152, controls) and evaluated in a multivariate analysis. RESULTS: Low levels of serum cholesterol, triglycerides, and glucose, before and after transplantation, were accompanied by a prolonged graft survival. Prognostic factors for early graft failure included serum triglycerides >300 mg/dl, cholesterol >250 mg/dl before transplantation, serum creatinine >4.0 mg/dl 1 month after transplantation, and donor age above 45 or less than 10 years. Additionally, systolic and, particularly, diastolic blood pressure was lower in the group with a prolonged graft function as compared with controls immediately before and after transplantation. In addition, the incidence of primary graft function was lower and the incidence of acute rejection episodes higher in controls. Cold and warm ischemic time, body mass index, recipient age, and gender did not differ significantly. CONCLUSIONS: Our data suggest that metabolic parameters play an important role in the process of late graft loss after kidney transplantation.     

13C- and 23Na-NMR investigations on alkali cellulose

Summary Solid state ²³Na- and ¹³C-NMR spectra of alkali cellulose are presented as a function of NaOH-concentration of the steeping lye, steeping temperature and amount of adhering lye (press factor). Results are discussed with regard to chemical binding of NaOH to the cellulose chain in the system cellulose/ NaOH/H₂O.Presented at the 22nd Microsymposium, Characterization of Structure and Dynamics of Macromolecular Systems by NMR Methods, Prague, CSSR, July 20–23,1981     

Quantifying the evolution of TTCN-3 as a language

Ten years of maintenance, nine published revisions of the standards for the Testing and Test Control Notation version 3 (TTCN-3), more than 500 change requests since 2006, and 10 years of activity on the official TTCN-3 mailing list add up to a rich history, not unlike that of many successful Open Source Software (OSS) projects. In this article, we contemplate TTCN-3 in the context of software evolution and examine its history quantitatively. We mined the changes in the textual content of the standards, the data in change requests from the past 5 years, and the mailing list archives from the past 10 years. In addition, to characterize the use of the TTCN-3 we investigated the meta-data of the contributions at the TTCN-3 User Conference, and the use of language constructs in a large-scale TTCN-3 test suite. Based on these data sets, we first analyze the amount, density, and location of changes within the different parts of the standard. Then, we analyze the activity and focus of the user community and the maintenance team in both the change request management system and the official TTCN-3 mailing list. Finally, we analyze the distribution of contributions at the TTCN-3 User Conference across different topics over the past 8 years and construct use anomalies during the development of a large-scale test suite. Our findings indicate that the TTCN-3 is becoming increasingly stable as the overall change density and intensity, as well as the number of change requests are decreasing, despite the monotonous increase in the size of the standards.     

Surface chemistry and kinetics of the hydrolysis of isocyanic acid on anatase

In order to meet the stricter NO_x and particulate emission limits for commercial vehicles, the selective catalytic reduction (SCR) with urea is currently seen having the highest potential. The conversion of urea into ammonia and carbon dioxide consists of two consecutive reactions, in which isocyanic acid is an intermediate that is hydrolyzed over TiO₂. The intrinsic kinetics and the surface chemistry for this reaction are explored. Up to a temperature of 132 °C the reaction was in the intrinsic kinetic regime (E_A = 73 kJ/mol), while at higher temperatures the reaction was limited by pore and external diffusion constraints, respectively. In the presence of NO, NH₃ and NO₂, the catalytic activity was negatively influenced, increasing in severity in the sequence mentioned indicating that nitrates formed from NO₂ were most effective in blocking cations and anions of TiO₂. IR spectroscopy indicates that dissociative adsorption of HNCO on TiO₂ forms Ti–NCO and hydrogen bonded OH species. In the presence of water, isocyanic acid was so rapidly hydrolyzed that only adsorbed ammonia was observed on the catalyst surface. The presence of NO, NH₃ and NO₂ retards hydrolysis leading to the appearance of isocyanate species on the surface.     

Pheromone specificity inEriocrania semipurpurella (Stephens) andE. sangii (Wood) (Lepidoptera: Eriocraniidae) based on chirality of semiochemicals

The fifth abdominal segment of femaleEriocrania semipurpurella (Stephens) andE. sangii (Wood) contains a pair of exocrine glands. Hexane extracts of this segment were prepared from both species and analyzed by gas chromatography with simultaneous flame ionization and electroantennographic detection (EAD). For both species, the EAD active peaks were identified as nonan-2-one, (Z)-6-nonen-2-one, and (Z)-6-nonen-2-ol by means of mass spectrometry and comparison of retention indices with those of synthetic standards. Enantiomeric separation of chiral alcohols from the female extracts was achieved by gas chromatographic analysis on a cyclodextrin column. InE. semipurpurella, a mixture of (2S,6Z)-nonen-2-ol and (2R,6Z)-nonen-2-ol (2: I) was found, whereas inE. sangii (2S,6Z)-nonen-2-ol was the predominant enantiomer and only traces of theR enantiomer were indicated by the antennal response. In field tests, a blend of the three compounds was not attractive to conspecific males. A subtractive assay showed that the alcohol in various enantiomeric mixtures was the only attractive compound, whereas addition of (Z)-6-nonen-2-one to the alcohol completely inhibited the attraction of both species. A trapping experiment including a wide range of ratios between theR andS enantiomers showed that baits containing 95–100% of theS enantiomer were attractive to maleE. sangii, whereas males ofE. semipurpurella were attracted to all tested ratios of the enantiomers. However, the response profiles of maleE. semipurpurella differed between populations from southern Sweden, south Finland, and the Kola Peninsula in Russia. In south Sweden males were maximally attracted to a racemic mixture of the alcohols. At the Kola PeninsulaE. semipurpurella was attracted to baits containing 95–100% of theR enantiomer. In south Finland all tested ratios between 0 and 100%R enantiomer trappedE. semipurpurella, but the trap catches appeared to be bimodally distributed with peaks around 15 and 70%R enantiomer. The trapping results suggest the existence of pheromone races or sibling species among the specimens identified asE. semipurpurella.Dedicated to Prof. H. J. Bestmann on the occasion of his 70th birthday.     

Perfect Laplacians for Polygon Meshes

A discrete Laplace‐Beltrami operator is called perfect if it possesses all the important properties of its smooth counterpart. It is known which triangle meshes admit perfect Laplace operators and how to fix any other mesh by changing the combinatorics. We extend the characterization of meshes that admit perfect Laplacians to general polygon meshes. More importantly, we provide an algorithm that computes a perfect Laplace operator for any polygon mesh without changing the combinatorics, although, possibly changing the embedding. We evaluate this algorithm and demonstrate it at applications.     

Think,feel, bid: the impact of environmental conditions on the role of bidders’ cognitive and affective processes in auction bidding

Environmental conditions and the interplay of cognitive and affective processes both exert influences on bidding behavior. This paper brings the above together, considering how the (external) auction environment determines the impact of (internal) cognitive and affective processes on bidding behavior, assessed in comparison to the optimal bid. Two aspects of the auction environment were considered, namely auction dynamics (low: first-price sealed-bid auction, high: Dutch auction) and value uncertainty (low, high). In a laboratory experiment, we assess bidders’ cognitive workload and emotional arousal through physiological measurements. We find that higher auction dynamics increase the impact of emotional arousal on bid deviations, but not that of cognitive workload. Higher value uncertainty, conversely, increases the impact of cognitive workload on bid deviations, but not that of emotional arousal. Taken together, the auction environment is a critical factor in understanding the nature of the underlying decision process and its impact on bids.     

A system framework for gamified Cost Engineering

This study develops a system framework and an enterprise IT solution for integrating gamification elements to efficiently implement and continuously perform Cost Engineering. Cost Engineering is a systematic approach to manage knowledge and competencies regarding costs reduction measures throughout the life cycle of products and is technology, resource and time intensive. Gamification as a non-monetary multidimensional incentive system holds great potential to implement and establish Cost Engineering in a novel and less resource demanding manner and stipulate knowledge sharing and dissemination. Building on a review of the relevant literature we conducted 20 interviews with experts from eight companies of the German and Austrian high-tech manufacturing industry to examine the system requirements from an organizational perspective. Analyzing the interviews, we found that companies need a flexible platform where the game elements help to align management objectives with concrete tasks, meet legislative regulations and have different evaluation methods. Our proposed system framework combines the organizational and IT requirements with gamification elements to efficiently steer Cost Engineering methods and best manage knowledge and competencies.