The MiniWiD-Coater. III. Effect of Application Temperature on the Dissolution Profile of Sustained-Release Theophylline Pellets Coated with Eudragit Rs 30 D

Theophylline pellets were coated with Eudragit RS 30 D in a miniature fluid-bed pan coater called MiniWiD developed recently. The dispersions were plasticized with varying amounts of triethyl citrate (TEC), dibutyl phthalate (DBP), and polyethylene glycol 6000 (PEG) and applied at different temperatures ranging from 25 to 45 °C. Theophylline release was tested by dissolution using the USP Apparatus 2 (paddle) in 0.1 N hydrochloric acid under sink conditions over 6 hours.

At a coating level of 4 % (0.7 mg/cm²) sustained-release profiles were obtained from dispersions plasticized with TEC or DBP. By reducing the amount of plasticizer from 20 to 10%, films with higher permeabilities were obtained. This effect was compensated by tempering the pellets at 50 deg;C for 24 hours. The coating temperature had little effect on the dissolution profiles of TEC-plasticized films and no effect on films with DBP.

Coatings plasticized with 20% PEG were applied at temperatures ranging from 25 to 45 °C. These films required a coating level of about 18 % (3.3 mg/cm²) to provide comparable sustained-release properties. In contrast to DBP and TEC, a strong influence of the coating temperature on the release rates was observed in which higher temperatures led to slower release rates. This behavior can be explained by the minimum film-forming temperature (MFT). Since PEG does not lower the MFT of Eudragit RS 30 D, the application of these films below the MFT of 45 °C is associated with a lower degree of film formation.     

On the computation of conjugacy classes of Chevalley groups

In this paper an algorithm is presented to determine the number of semisimple conjugacy classes for a given centralizertype for the Chevalley groupsSL _n(q) andSU _n(q). Moreover we give the exact number of regular semisimple classes of this groups and a summary of results on the generic classnumber of exceptional Chevalley groups of adjoint type.The first author acknowledges financial support by a grant of the Deutsche Forschungsgemeinschaft     

Compile-time copy elimination

Single-assignment and functional languages have value semantics that do not permit side-effects. This lack of side-effects makes automatic detection of parallelism and optimization for data locality in programs much easier. However, the same property poses a challenge in implementing these languages efficiently. This paper describes an optimizing compiler system that solves the key problem of aggregate copy elimination. The methods developed rely exclusively on compile-time algorithms, including interprocedural analysis, that are applied to an intermediate data flow representation. By dividing the problem into update-in-place and build-in-place analysis, a small set of relatively simple techniques—edge substitution, graph pattern matching, substructure sharing and substructure targeting—was found to be very powerful. If combined properly and implemented carefully, the algorithms eliminate unnecessary copy operations to a very high degree. No run-time overhead is imposed on the compiled programs.     

Irrigation Modelling in the Context of Basin Water Resources

Management practices for irrigation schemes can often be improved by modelling the behaviour of a scheme and by evaluating its efficiency statistics. However, looking at an irrigation scheme without regard for other water uses within the river basin may not be effective. Efficiencies computed in this way are local and, since water may be used many times within the same basin, may not be realistic. Changes in water uses (e.g. irrigation, industrial, power production, urban water supply, navigation, environmental, recreational) will often have effects on other uses; and changes in irrigation schemes (management,structural, crop pattern) may affect other users within the basin. In addition, all water users will be affected by external changes such as changes in land cover or in climate. As demand for water increases, these links become more important until, at some stage, there is insufficient water for all users and hard choices must be made. Hydrological modelling is a tool that can be used to relate irrigation schemes to the other water uses within a river basin and can help in assessing real productivities and in evaluating alternative patterns of water usage. This paper discusses the techniques available to simulate irrigation schemes within overall basin water resources using, as an example, an intensively utilized basin in western Turkey.     

Model of a miniature pig catheterized for pharmacokinetic and pharmacodynamic studies of anti-infective agents

The purpose of this study was to examine the role of sleep problems in the etiology of nursing caries. Two-hundred mothers of children (104 with nursing caries and 96 caries free) from ages 2 to 4.5 years were surveyed to determine whether difficulty with child sleep and ensuing sleep-associated feeding might be related to the presence of nursing caries. Differences were noted between these two groups regarding: average number of nights the child slept through the night (P < 0.001); total hours of sleep per night (P < 0.05); frequency of night waking episodes (P < 0.01); feeding on demand upon waking (P < 0.01); using a bottle to assist with falling asleep at night (P < 0.001); and feeding in association with nap time (P < 0.001). Differences also were noted in regard to average age of weaning (P < 0.001). Our findings suggest that sleep problems among young children are a behavioral risk factor for night-time bottle use and early childhood caries.     

Analysis of adaptive routing schemes in multirate loss networks

As technology evolves, it is now feasible to implement sophisticated adaptive routing schemes on networks which support different kinds of services with heterogeneous bandwidth characteristics. Adaptive routing can increase the network throughput by routing calls to less congested paths. It can also be used to bypass transmission facility failures. In this paper, we analyze and compare two adaptive routing schemes. The first is called theMaximum mean time to blocking (MTB) routing which is based on themean time to blocking measure of a link. This measure captures the traffic rates, bandwidth characteristic and link capacity information and reflects more accurately the congestion status of different paths. The second is theM ² routing, which is a modification of the least loaded routing (LLR). Aggregation of link status information can significantly reduce signalling traffic. We show in this paper that with properly designed aggregation, the aggregatedM ² and MTB routings can have performance that approach that of the non-aggregated schemes. The use of complete sharing and restricted access policies together with trunk reservation control in multirate loss networks are also studied.     

Effects of a Nd—Fe—B magnetic filler on the crystallization of poly(phenylene sulfide)

The crystallization of poly(phenylene sulfide) (PPS) in a polymer–magnetic Nd—Fe—B powder suspension was studied. Isothermal crystallization behavior was analyzed by way of differential scanning calorimetry, and the kinetics were described via the Avrami equation. The Avrami parameters and the crystallization times were strongly affected by both the particle size and the presence of a coupling agent coated on the filler particles. The small Nd—Fe—B particles exhibited long induction and half‐times, whereas the large particles tended to have short crystallization times. Particles ranging from 38 to 150 μ appeared to have similar crystallization times and to have no significant change in the value of Avrami index with melt crystallization temperature. As a result of these analyses, the dynamic mechanical properties were determined to correlate the fundamental polymer crystallization characteristics and the physical properties of the PPS binder. The enhancement of the wetting of the filler to the binder was promoted through the coupling agent, as confirmed by dynamic mechanical testing performed on the samples. The storage modulus typically decreased because of the presence of the uncoated small particles. Conversely, the loss modulus was enhanced because of the presence of the coated small particles in the PPS binder. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1091–1102, 2002     

Measurement and prediction of pressure drop in two-phase flow

Experimental data for air–water two-phase co-current flow in two different pipe diameters were used to test the prediction of pressure drop by a number of existing theories and correlations. Several models are shown to be useful for prediction, particularly with the stratified regimes which have proved difficult to handle in the past. The model suggested by Olujic proved to be of particular value.