Full theory of speckle displacement and decorrelation in the image field by wave and geometrical descriptions and its application in mechanics

Abstract

The paper describes the possibility of using the speckle pattern decorrelation for determination of small deformation tensor components of an elementary object surface area in an optical image field. The relationship between the small-deformation tensor and the speckle field displacement is analysed in detail. The studied problem is presented from the approximation viewpoint of both wave and geometrical optics.     

Using enzymatic numerical P systems for modeling mobile robot controllers

P systems (PSs) are powerful computing models based on the structure of a biological cell and on the way chemicals interact in complex biochemical reactions which take place in various compartments (or membranes) of the cell. A lot of interest has been focused on developing various forms of PSs, from cell-like to tissue-like structures. Most of the research effort has been concentrated on symbolical PSs. Numerical P systems (NPSs) have been introduced in 2006 for possible applications in economics and business processes but no other structures and applications concerning this type of PSs have been provided since then. This paper proposes a new class of NPSs, in which enzyme-like variables allow the existence of more than one production function in each membrane, while keeping the deterministic nature of the system. The way this new type of deterministic NPSs works and a possible use of it for modeling mobile robot controllers are detailed.     

Determining adulteration of canned products using SNIF-NMR and IRMS: detection of undeclared addition of synthetic acetic acid

Possible adulteration of canned products containing spirit vinegar pickle by adding synthetic acetic acid is a significant problem of the food industry. Isotope analyses, which determine botanical origin of acetic acid and also can detect synthetic acid, were applied to detect undeclared addition of synthetic acetic acid to canned products. The aim of the study was to improve the extraction technique for the SNIF-NMR (²H/¹H; site-specific natural isotopic fractionation-nuclear magnetic resonance) and IRMS (¹³C/¹²C; isotope ratio mass spectrometry) isotope methods and for an atypical matrix and to determine isotope ratios in canned vegetables pickle to prove their adulteration or authenticity. The following set of canned products was analysed: pickled cucumbers (n = 16) and one vinegar pickle purchased in the Czech market and six model (cucumber) pickles. The determined ratios of ²H/¹H and ¹³C/¹²C for the pickled cucumbers proved to be authentic ranged from 89.4 to 107.0 ppm and from ?28.7 to ?15.6 ‰, respectively; for the synthetic acetic acids diluted with water they ranged from 114.2 to 129.0 ppm and from ?44.9 to ?33.4 ‰, respectively. Isotope analyses were confirmed as a reliable tool for assessing authenticity of canned products. The method enables detection of synthetic acetic acid addition into vinegars and canned vegetables containing vinegar pickle up from 20 % (of total acidity).     

Rapid fabrication of poly(ε‐caprolactone) nanofibers using needleless alternating current electrospinning

Poly(ε‐caprolactone) ( PCL) biopolymer nanofibers and micro‐fibers have been fabricated for the first time at the rates up to 14.0 g per hour using a needleless and collectorless alternating current electrospinning technique. By combining the ac‐voltage, “green” low toxicity glacial acetic acid (AA) as the solvent and sodium acetate (NaAc) as an additive, beadless PCL fibers with diameters tunable from 150 nm to 2000 nm, varying surface morphology and degree of self‐bundling are obtained. In this new approach, the addition of NaAc plays a crucial role in improving the spinnability of PCL solution and fiber morphology. NaAc reveals the concentration‐dependent effect on charge transfer and rheological properties of the PCL/AA precursor, which results in broader ranges of spinnable PCL concentrations and ac‐voltages suitable for rapid manufacturing of PCL‐based fibers. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43232.     

Conversion of Nuclear Waste to Molten Glass: Cold‐Cap Reactions in Crucible Tests

The feed‐to‐glass conversion, which comprises complex chemical reactions and phase transitions, occurs in the cold cap during nuclear waste vitrification. To investigate the conversion process, we analyzed heat‐treated samples of a simulated high‐level waste feed using X‐ray diffraction, electron probe microanalysis, leaching tests, and residual anion analysis. Feed dehydration, gas evolution, and borate phase formation occurred at temperatures below 700°C before the emerging glass‐forming melt was completely connected. Above 700°C, intermediate aluminosilicate phases and quartz particles gradually dissolved in the continuous borosilicate melt, which expanded with transient foam. Knowledge of the chemistry and physics of feed‐to‐glass conversion will help us control the conversion path by changing the melter feed makeup to maximize the glass production rate.     

Development of Saturable Absorbers for Laser Passive Q‐Switching near 1.5 μm Based on Transparent Ceramic Co2+:MgAl2O4

We describe the development of a reasonable cost Co²⁺:MgAl₂O₄ transparent ceramic plates fabrication technology that allows the producing of parts functioning as passive laser Q‐switches in the 1.3–1.7 μm domain. The main relevant material characteristics were measured. The absorption band, positioned between 1.2 and 1.7 μm, is typical of the ⁴A₂ (⁴F) → ⁴T₁ (⁴F) transition of Co²⁺ substituting Mg²⁺ ions in their T_d symmetry sites. The measured ground‐state absorption cross section σ_gs = 2.9 × 10^?19 cm², saturation contrast γ = 0.12, and depleted ground‐state recovery time τ₂ = 110–430 ns render such parts suitable for the intended application. The radiative lifetime was estimated as . The spin‐orbit splitting constant was estimated as ξ_SL??150 cm^?1 for the ⁴F parent ground state, and ξ_SL ? –575 cm^?1 for the ⁴P parent excited state. Obtained specimens had a transmission of ~80% (t = 2 mm, λ = 600 nm) and included some opaque, white spots. Further improvement of host optical transmission and resistance to laser damage are necessary.     

Effect of composition on the matrix transformation of the Co-Re-Cr-Ta-C alloys

Neutron diffraction measurement was performed in-situ at high temperatures on Co-Re-Ta-C alloys with and without Cr addition. This included alloys containing different C content with the C/Ta ratio varying between 0.5 and 1.0. The Co-Re-solid solution matrix of the experimental alloys is polymorphic (like in pure cobalt) and transformed from low temperature hexagonal ? phase to high temperature cubic γ phase on heating. This transformation is reversible and show hysteresis. The main alloying addition, Re, stabilizes the ? Co-phase and increases the transformation temperature to above 1273 K. The onset of the \(\varepsilon \rightleftharpoons \gamma\) transformation during heating and cooling was found to differ depending on the alloy composition. In alloys without Cr addition the transformation was not completed on cooling and the high temperature γ phase was partly retained at room temperature in metastable state with the amount depending on the cooling rate from high temperature. The diffraction and microstructural results showed that Cr is ? stabilizer (similar as Re) but the role of Ta is not clear. The C/Ta ratio has no direct effect on the matrix phase transformation. Nevertheless, it influences indirectly by determining the amount of Ta which is freely available in the matrix.     

Evaluation of surface/interface quality,microstructure and mechanical properties of hybrid additive-subtractive aluminium parts

A disadvantage of selective laser melting (SLM) processes for the manufacture of large parts is their slow build time per unit volume. A hybrid route is to generate core simple shapes traditionally, for example by machining, followed by adding final features by SLM. Here the mechanical integrity of such hybrid parts is studied, choosing the building of AlSi10Mg by SLM on a machined AA6082 base, in the shape of a tensile test piece, as a simple example. These materials are chosen for their relevance to lightweight parts. As-built parts fail at the SLM/machined interface but standard heat treatments transfer failures to the machined material. Optimised SLM processing conditions and microstructures of the SLM and interfacial regions are reported.     

Windshield recycling focused on effective separation of PVB sheet

The study is focused on windshield recycling process resulting in poly(vinyl butyral) (PVB) sheets with very low amout of remain glass particles. PVB sheets were obtained from worldwide manufacturer DuPont and then they were laminated by standard autoclaving process. One sample of PVB sheet was modified by multi‐functional organic acid in order to compare various levels of adhesion. Three‐stage technology was proposed for recycling PVB sheets. In the first‐stage laminated safety glass was mechanically cracked. In the second‐stage the adhesion reduction to minimal degree was followed by chemical‐physical assisted separation. It causes self‐release of the glass out of the PVB sheet. The third‐stage was mechanical peeling of the remaining glass from the PVB sheet which completed the recycling process. The optimal process conditions for the most effective delamination process were found. Delamination technology produces PVB sheet with minimal residual glass content (up to 300 ppm) and minimal change in PVB sheet properties. Described recycling technology is ecologically friendly (the effluent is fully recyclable as well) and could reduce the worldwide problem with windshield waste disposal. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39879.     

Extraction of Bitter Acids from Hops and Hop Products Using Pressurized Solvent Extraction (PSE)

The EBC method 7.7, currently used for determination of bitter acids in hop products, is a time‐consuming and laborious extraction technique. In this paper, our aim was to propose a new extraction method based on Pressurized Solvent Extraction (PSE) sometimes also called Pressurized Fluid Extraction (PFE) or Accelerated Solvent Extraction (ASE). Compared to conventional extractions, PSE offers a number of important benefits. PSE on OnePSE^® automated extractor was used for extraction of α‐ and β‐acids from hops and hop products and the parameters influencing extraction efficiency and the influence of the sample preparation method were studied. The quantitative determination of α‐ and β‐acids in the extracts was accomplished by using an HPLC apparatus equipped with diode array detector. The experimental results were compared with those obtained by the standard EBC 7.7 method and the two methods were found to be fully compatible