Effects of solid retention time on the performance of submerged anoxic/oxic membrane bioreactor.

In this study, four similar bench-scale submerged Anoxic/Oxic Membrane Bioreactors (MBR) were used simultaneously to investigate the effects of solids retention time (SRT) on organic and nitrogen removal in MBR for treating domestic wastewater. COD removal efficiencies in all reactors were consistently above 94% under steady state conditions. Complete conversion of NH(4+)-N to NO(3-)-N was readily achieved over a feed NH(4+)-N concentration range of 30 to 50 mg/L. It was also observed that SRT did not significantly affect the nitrification in the MBR systems investigated. The average denitrification efficiencies for the 3, 5, 10 and 20 days SRT operations were 43.9, 32.6, 47.5 and 66.5%, respectively. In general, the average effluent nitrogen concentrations, which were mainly nitrate, were about 22.2, 27.6, 21.7 and 13.9 mg/L for the 3, 5, 10 and 20 days SRT systems, respectively. The rate of membrane fouling at 3 days SRT operation was more rapid than that observed at 5 days SRT. No fouling was noted in the 10 days and 20 days SRT systems during the entire period of study.     

Integrated Personal Mobility Architecture: A Complete Personal Mobility Solution

The high expectations and demand for users to access the Internet from anywhere at anytime has made user mobility an important part of the design and development of the next generation mobile communications and computing. Traditionally user mobility has been divided into two areas: Terminal Mobility and Personal Mobility. In recent years terminal mobility has focused on the movement of the terminal and developed extensions to IP protocols such as Mobile IP. In contrast, personal mobility has only received limited attention, and is somewhat lagging behind. This research has either focussed on personal mobility in communications or personalisation of operating environments. As a result, to date no framework for providing true personal mobility has emerged. In this paper, we introduce a new personal mobility framework called IPMoA (Integrated Personal Mobility Architecture), which integrates both aspects of personal mobility to provide a complete personal mobility solution, and illustrate the viability of this approach through a proof-of-concept implementation.     

Urban radiowave propagation: a 3-D path-integral wave analysis

A discussion concerning the need for three-dimensional (3-D) urban radiowave propagation models is presented and followed by a review of previously published work on this topic using the asymptotic path-integral technique. The limitations and advantages of this technique are explained and it is applied to study diffraction by a small number of canonical geometries. The validity of this technique is verified by comparison with controlled laboratory measurements taken at millimetric wave frequencies. Finally, its ability to classify field components according to their distribution in space is employed in order to analyze the observed field strength distributions in the model environments     

A knowledge-based system for sensor selection

This paper presents a Knowledge-based system (KBS) developed to allow users, who may not be knowledgeable about sensors, to select sensors suitable for their specific needs. The KBS runs on a micro-computer. The selection criteria are user specified and are based on the desired measurement parameters. The system output includes all of the operational and dimensional parameters of the recommended sensor, price, and vendor information.     

Halogen-induced charge transfer polymerization of pyrrole in aqueous media

Simultaneous polymerization and doping of pyrrole have been carried out in the presence of a halogenic electron acceptor, bromine (Br₂) or iodine (I₂), in aqueous dispersion or in a two-phase solvent system. The morphology of the polypyrrole (PPY) so produced is granular and porous. The electrical conductivity of the PPY-I₂ charge transfer (CT) complex is of the order of 10¹ ohm⁻¹ cm⁻¹ while that of the PPY-Br₂ complex is about one order of magnitude less. Both complexes are stable in the atmosphere. The physicochemical properties of the PPY-I₂ and PPY-Br₂ CT complexes prepared under various experimental conditions are examined in detail.     

Analysis of MTF degradation in the imaging of cells in a flow system

The time-delay and integration method can be used with a charge-coupled device array to acquire images of cell in a flow cytometer. The loss of high spatial frequency components in images acquired with this technique is studied by deriving the modulation transfer function (MTF) for each of the main causes of image degradation: finite sampling aperture, nonsynchronism between image movement and charge transfer rate, discrete charge motion, transfer inefficiency, and axis misalignment. The system MTF and resolution in the horizontal and vertical directions are then examined.©1994 John Wiley & Sons Inc     

Determination of material parameters from regions close to the collector using electron beam-induced current

The conventional method of extracting the minority carrier diffusion length using the electron beam-induced current (EBIC) technique requires that the electron beam be placed at region more than two diffusion lengths away from the collector. The EBIC signals obtained under this condition usually has low signal to noise ratio. In addition, the true diffusion length of the sample is initially unknown and hence it is difficult to estimate how close the beam can be placed from the collector. To overcome all these difficulties, a new method of extracting minority carrier diffusion length from the EBIC signal is proposed. It is shown that this method can be applied to EBIC signals obtained from regions close to the collector. It is also shown that the surface recombination velocity of the sample can also be obtained using this method. This theory is verified using EBIC data generated from a device simulation software.