Do ozone and boric acid affect microleakage in class V composite restorations?

The aim of this in vitro study was to evaluate the effects of chlorhexidine gluconate (2%), sodium hypochloride (2.5%), ozone gas, and boric acid at different concentrations (1%, 3%, 5%, and 7%) on microleakage from composite restorations.

In a total of 80 extracted human canine teeth, a class V cavity was opened on the buccal surface and the samples were separated into eight groups. In the control group, no procedure was applied for cavity disinfection, then composite restoration (Z250, 3M) was made using single-stage, self-etch adhesive (Single Bond 3M). In the other groups, seven different disinfectants were used, then the cavity was restored. The teeth were split into two in the buccolingual direction, parallel to the long axes. Stain penetration was examined under stereomicroscope and scored. Examination with SEM was made on one sample from each group, selected at random. Statistical evaluations were made using Dunnett C Post Hoc Comparison and Kruskal–Wallis H tests.

In the occlusal region evaluation, the groups with the lowest level of leakage were the 3% and 5% boric acid groups, and the highest levels of microleakage were determined in the chlorhexidine group and the 1% boric acid group. In the gingival region, the lowest level of microleakage was in the 5% boric acid group and the highest levels were determined in the 1% and 7% boric acid groups.

Boric acid disinfectants used at suitable concentrations were not seen to create a risk in respect of microleakage.     

Systematic multiscale models to predict the compressive strength of self-compacting concretes modified with nanosilica at different curing ages

The evolution of nanotechnology brings materials with novel performance and during last year’s much attempt has been established to include nanoparticles especially nano-silica (NS) into the concrete to improve performance and develop concrete with enhanced characteristics. Generally, NS is incorporated into the self-compacting concrete (SCC) aiming to positively influence the fresh, mechanical, microstructure, and durability properties of the composite. The most important mechanical property for all types of concrete composites is compressive strength. Therefore, developing reliable models for predicting the compressive strength of SCC is crucial regarding saving time, energy, and cost-effectiveness. Moreover, it gives valuable information for scheduling the construction work and provides information about the correct time for removing the formwork. In this study, three different models including the linear relationship model (LR), nonlinear model (NLR), and multi-logistic model (MLR) were proposed to predict the compressive strength of SCC mixtures made with or without NS. In this regard, a comprehensive data set that consists of 450 samples were collected and analyzed to develop the models. In the modeling process, the most important variables affecting the compressive strength such as NS content, cement content, water to binder ratio, curing time from 1 to 180 days, superplasticizer content, fine aggregate content, and coarse aggregate content were considered as input variables. Various statistical assessments such as Root Mean Squared Error (RMSE), Mean Absolute Error (MAE), Scatter Index (SI), OBJ value, and the coefficient of determination (R²) were used to evaluate the performance of the proposed models. The results indicated that the MLR model performed better for forecasting the compression strength of SCC mixtures modified with NS compared to other models. The SI and OBJ values of the MLR model were 18.8% and 16.7% lower than the NLR model, indicating the superior performance of the MLR model. Moreover, the sensitivity analysis demonstrated that the curing time is the most affecting variable for forecasting the compressive strength of SCC modified with NS.

     

Highly active and stable CeO2 supported nickel-complex catalyst in hydrogen generation

Cerium oxide supported 5-Amino-2,4-dichlorophenol-3,5-ditertbutylsalisylaldimine-Nickel complex for the first time was used to produce H₂ from hydrolysis of sodium borohydride. Cerium oxide supported Nickel complex catalyzed hydrolysis system was studied depend on temperature, concentration of sodium hydroxide, amount of Cerium oxide supported Ni complex catalyst, concentration of Ni complex and concentration of sodium borohydride. Cerium oxide supported Ni(II) complex display highly effective catalytic activity in sodium borohydride hydrolysis reaction. The obtained Cerium oxide supported Ni(II) complex catalyst was characterized by using Fourier Transform Infrared Spectroscopy, Scanning Electron Microscope, Transmission Electron Microscope, Brunauer-Emmett-Teller Surface Area Analysis, X-Ray Diffraction Analysis techniques. The catalyst stability was tested, even the fifth recycle the catalytic activity was maintained at 100%. Additionally the proposed Cerium oxide supported-Ni (II) complex catalyzed sodium borohydride hydrolysis mechanism was determined carefully. The experimental results showed that Cerium oxide supported Ni (II) complex catalyst accelerate sodium borohydride hydrolysis with 43,392 and 19,630 mL H₂ g_cat^?1 min^?1 hydrogen production rates at 50 °C and 30 °C respectively and 20,587 kJ mol^?1 activation energy.     

Simulation and Empirical Studies of Solvent Evaporation Rates in Vacuum Evaporation Crystallization

Simulation results for continuous vacuum evaporation crystallization obtained by Aspen Plus and experimental results for semi‐batch vacuum evaporation crystallization are presented. In the crystallization experiments, the fixed heat duty was used to compare the water evaporation rates and crystal properties obtained at different pressures. The solution selected was aqueous glycine. It has the ability to form a number of different crystalline polymorphs, which allows it to exhibit a variety of different physical properties while maintaining its chemical properties. X‐ray diffraction results demonstrated that mainly the γ‐crystal form is produced under the conditions applied in vacuum evaporation crystallization.     

Experimental analysis of the influence of the voltage waveform on ozone generation efficiency

Although the dielectric barrier discharge (DBD) has been widely considered and studied for ozone generation, only a few studies have examined the influence of the alternating voltage waveform on the ozone rate production. This paper analyses the influence of the voltage shape on the ozone concentration and the energy efficiency of a DBD cylindrical ozone generator. Three voltage signals were studied using a high-voltage amplifier: sinusoidal, triangular and rectangular signals with voltage values up to 8 kV and frequencies up to 1.1 kHz. The obtained results showed that the efficiency of the ozone generator depends strongly on the type of the voltage waveform. The maximum values of the energy efficiency and the ozone concentration were obtained with the triangular voltage signal. This wave shape configuration has been successfully used for discolouration of water contaminated by textile dye.     

Structure, infrared and Raman spectroscopic studies of new Sr0.50SbFe(PO4)3 and SrSb0.50Fe1.50(PO4)3 Nasicon phases

Two newly synthesised Sr_0.50SbFe(PO₄)₃ [Sr_0.5.] and SrSb_0.50Fe_1.50(PO₄)₃ [Sr.] phases were obtained by conventional solid-state reaction techniques at 1000 °C in air atmosphere. Their crystallographic structures were determined at room temperature from X-ray powder diffraction (XRPD) data using the Rietveld analysis. Both compounds belong to the Nasicon structural family. [Sr_0.5.] and [Sr.] crystallise in rhombohedral system with \textR[`3] {\text{R}}\overline{3} and \textR[`3] \textc {\text{R}}\overline{3} {\text{c}} space group, respectively. Hexagonal cell parameters for [Sr_0.5.] and [Sr.] are: a = 8.227(1) ?, c = 22.767(2) ? and a = 8.339(1) ?, c = 22.704(2) ?, respectively. Sr²⁺ and vacancies in {[Sr_0.50]_3a[□_0.50]_3b}_M1SbFe(PO₄)₃ are practically ordered within the two positions, 3a and 3b, of M1 sites. Structure refinements show also an ordered distribution of Sb⁵⁺ and Fe³⁺ ions within the Nasicon framework. Within the structure, each Sr_(3a)O₆ octahedron shares two faces with two Fe³⁺O₆ octahedra and each vacancy (□_(3b)O₆) site is located between two Sb⁵⁺O₆ octahedra. In [Sr]_M1Sb_0.50Fe_1.50(PO₄)₃ compound, all M1 sites are occupied by Sr²⁺ and the Sb⁵⁺ and Fe³⁺ ions are randomly distributed within the Nasicon framework. A Raman and infrared spectroscopic study was used to obtain further structural information about the nature of bonding in both selected compositions.     

Continuous size-based focusing and bifurcating microparticle streams using a negative dielectrophoretic system

Dielectrophoresis (DEP) is an electrokinetic phenomenon which is used for manipulating micro- and nanoparticles in micron-sized devices with high sensitivity. In recent years, electrode-based DEP by patterning narrow oblique electrodes in microchannels has been used for particle manipulation. In this theoretic study, a microchannel with triangular electrodes is presented and a detailed comparison with oblique electrodes is made. For each shape, the behavior of particles is compared for three different configurations of applied voltages. Electric field, resultant DEP force, and particle trajectories for configurations are computed by means of Rayan native code. The separation efficiency of the two systems is assessed and compared afterward. The results demonstrate higher lateral DEP force, responsible for particle separation, distributed wider across the channel width for triangular shape electrodes in comparison with the oblique ones. The proposed electrode shape also shows the ability of particle separation by attracting negative DEP particles to or propelling them from the flow centerline, according to the configuration of applied voltages. A major deficiency of the oblique electrodes, which is the streamwise variation of the lateral DEP force direction near the electrodes, is also eliminated in the proposed electrode shape. In addition, with a proper voltages configuration, the triangular electrodes require lower voltages for particle focusing in comparison with the oblique ones.     

Techno-economic evaluation of energy efficiency measures in high rise residential buildings in Malaysia

In this paper, a survey was conducted on a residential condominium to estimate energy use by different household appliances along the lighting energy estimation in public areas. It has been found that about 2.17 GWh of energy is used in the condominium annually by different types of household appliances and lightings in public areas. As there is significant potential to reduce the energy used, different energy savings measures have been applied and energy savings, bill savings, life cycle cost analysis have been estimated and presented in this paper. It has been found that a cumulative amount of 2.4 GWh of energy can be saved for about 10 years with the implementation of different energy savings strategies proposed for appliances and lighting in public areas. However, good maintenance practices and good energy management practices should be employed continuously to maintain high energy efficiency and high performance of the equipment used and the entire building. It has been found that some of the measures like reducing air conditioning load and reducing heat gain through window tinting are economically very viable as payback period is very short. More advantageously, some of the measures can be implemented without investing significant cost. Ultimately, a key driver in the success of energy efficiency is the education and attitude of the stakeholders in the building industry, and end users who are committed to practice energy saving measures.     

Fully Automated Inductance Measuring System Using New Fabricated Inductance Box

Decade inductance boxes are widely used in electrical laboratories for calibration of instruments that measure inductance. The main aim of this paper is to construct a new inductance box providing a huge number of automated inductance steps, which are used in the laboratories to perform full automatic calibration of inductance meters. Therefore, a new inductance box has been introduced that mainly consists of three decades. The three inductance decades have the same design, but each has its four different internal inductive elements. Each decade can generate 15 different inductance values, so it is more economical and practical compared to the other ordinary decades, which produce only 10 values by using 10 internal inductive elements. 1666 different inductance values can be obtained from this inductance box, while 4096 inductance values can be obtained by the possible combinations of its three decades steps. Practical design, fabrication and specifications of this new inductance box are demonstrated in detail. It is designed to achieve relative accuracy in the range from 5 × 10^?4 to 5 × 10^?3. It could be used to perform full automatic inductance measurements at the National Institute of Standards, Egypt, for the first time. Comparison between an ordinary inductance box and the new introduced one has been made to validate its performance.