Development of low thermal expansion superalloy

Alloy 903 and Alloy 909 are well-known Fe-Co-Ni-Al-Ti-Nb alloys with controlled low thermal expan-sion, but they have some properties that can be improved. To improve stress-accelerated grain boundary oxidation embrittlement of Alloy 903 and instability of theγ phase of alloy 909, two new alloys with good stress-rupture ductility, high creep-rupture strength, high tensile strength at high temperature, and good controlled thermal expansion were developed. These property improvements were accomplished by the combination of optimizing the Fe-Co-Ni ratio of the matrix and stabilizing theγ phase with the addition of aluminum.     

Unitary equivalent classes of one-dimensional quantum walks

This study investigates unitary equivalent classes of one-dimensional quantum walks. We prove that one-dimensional quantum walks are unitary equivalent to quantum walks of Ambainis type and that translation-invariant one-dimensional quantum walks are Szegedy walks. We also present a necessary and sufficient condition for a one-dimensional quantum walk to be a Szegedy walk.     

Repeatedly foldable AMOLED display

In this study, a 5.9‐inch foldable active‐matrix organic light emitting diode (AMOLED) display was developed. A folding test was performed repeatedly. The display survived the folding test (100,000 folds) with a curvature radius of 2 mm. To protect an organic light emitting diode (OLED) against moisture, inorganic passivation layers are provided on the upper and lower sides of the flexible display. Using our transfer technology, high density passivation layers can be obtained. The measured water vapor transmission rate of the layer is 7 × 10^?6 g/m²?day or less, which improves OLED reliability. With these techniques, we have developed a book‐type display, which is repeatedly foldable like a book, and a tri‐fold display including a display area, which is foldable in three.     

Significant reduction of medical costs by differentiation therapy with all-trans retinoic acid during remission induction of newly diagnosed patients with acute promyelocytic leukemia. The Japan Adult Leukemia Study Group

OBJECTIVE: For resuscitation of hemorrhagic hypovolemia, we compared the effectiveness of (1) isotonic lactated Ringer's solution (LRS), (2) 2400 mOsm of 7.5% NaCl:6% dextran 70 (HSD), and (3) 2400 mOsm of 7.9% sodium acetate:1.9% NaCl:6% dextran 70 (HAD). DESIGN: In six randomized, blinded experiments for each solution, conscious instrumented adult sheep were hemorrhaged by removing approximately 1.8 L (42 +/- 3 mL/kg) of blood, while maintaining the mean arterial pressure (MAP) at 50 mm Hg for 2 hours. METHODS: Test solutions were infused as needed to restore the cardiac index to baseline. RESULTS: Volume requirements with HAD (236 +/- 29 mL) and HSD (244 +/- 39 mL) were significantly less (p < 0.05) than LRS (3463 +/- 234 mL). Mean arterial pressure was normalized with HSD and LRS, but not with HAD, which resulted in MAPs of 20 to 25 mm Hg less than baseline resulting from a reduced peripheral resistance. Oxygen delivery, however, was significantly higher with HAD during the resuscitation period. Acid-base balance (pH) and oxygen consumption were normalized within 5 minutes of infusion only with HAD. CONCLUSIONS: Small-volume infusion with HAD resulting in "high-flow-low-pressure" resuscitation may offer unique hemodynamic and metabolic advantages for the initial treatment of hemorrhage from trauma.     

Ion-beam processing of single crystal diamond using SOG mask

Various ion-beam etching characteristics of diamond and selectivity between diamond and spin-on-glass (SOG) were examined. The maximum selectivity of diamond and SOG was 12.7 in oxygen reactive ion-beam etching process at 100 V acceleration voltage. Using this etching condition and dot-shaped SOG mask, conical diamond field electron emitter arrays with 30 nm curvature radius, 2.58 μm base radius and 5.86 μm height were fabricated.     

Photocatalytic TiO2 films deposited by reactive magnetron sputtering with unipolar pulsing and plasma emission control systems

TiO₂ films with thickness of about 500 nm were deposited on unheated non-alkali glass substrates by reactive magnetron sputtering using one Ti metal target with unipolar pulsed powering of 50 kHz and the plasma emission feedback system (PCU). In order to keep the very high deposition rate, the depositions were carried out in the “transition region” between the metallic and the reactive (oxide) sputter mode where the target surface was metallic and oxidized, respectively. Stable deposition was successfully carried out in the whole “transition region” with PCU at total gas pressure of 3.0 Pa. All the as-deposited films deposited in the “transition region” showed amorphous structure, which performed very low photocatalytic activity. After the post-annealing in air at higher than 300 °C, all the films crystallized to anatase polycrystalline structure. They performed both photoinduced decomposition of acetaldehyde and photoinduced hydrophilicity under UV light illumination. The highest deposition rate in this study to deposit the photocatalytic TiO₂ films in the “transition region” was 90 nm/min, which was over twenty times higher than that for conventional sputter deposition processes.     

Intracellular recovery of gold by microbial reduction of AuCl4 ions using the anaerobic bacterium Shewanella algae

Microbial reduction and intracellular precipitation of gold was achieved at 25 °C and pH 7 by using the mesophilic anaerobic bacterium Shewanella algae with H₂ as the electron donor. The reductive precipitation of gold by S. algae was a fast process: 0.1–1 mol/m³ AuCl₄⁻ ions were completely reduced to insoluble gold within 30 min. The biogenic precipitates were crystalline gold nanoparticles of 10–20 nm present in the periplasmic space. The reducing power of S. algae at 3.2 × 10¹⁵ cells/m³ and 25 °C was comparable to that of aqueous citric acid solution (chemical reductant) at 20 mol/m³ and 50 °C. The intracellular recovery of gold is potentially attractive as an environmentally friendly alternative to conventional methods.     

On-line neuro-expert monitoring system for Borssele Nuclear Power Plant

A new method for an on-line monitoring system for the nuclear power plants has been developed utilizing the neural networks and the expert system. The integration of them is expected to enhance a substantial potential of the functionality as operators support.

The recurrent neural network and the feed-forward neural network with adaptive learning are selected for the plant modeling and anomaly detection because of the high capability of modeling for dynamic behavior. The expert system is used as a decision agent, which works on the information space of both the neural networks and the human operators. The information of other sensory signals is also fed to the expert system, together with the outputs that the neural networks generate from the measured plant signals. The expert system can treat almost all known correlation between plant status patterns and operation modes as a priori set of rules.

From the off-line test at Borssele Nuclear Power Plant (PWR 480 MWe) in the Netherlands, it was shown that the neuro-expert system successfully monitored the plant status. The expert system worked satisfactorily in diagnosing the system status by using the outputs of the neural networks and a priori knowledge base from the PWR simulator. The electric power coefficient is simultaneously monitored from the measured reactive and active electric power signals.     

Possibility of Japanese Cedar Pollen Causing False Positives in the Deep Mycosis Test

Because Japanese cedar pollen (JCP) contains beta-1,3-d-glucan (BG), there is concern that its lingering presence in the atmosphere, especially during its scattering period, may cause false positives in the factor-G-based Limulus amebocyte lysate (LAL) assay used to test for deep mycosis (i.e., G-test). Hence, we examined whether the LAL assay would react positively with substances contained in JCP by using the G-test to measure JCP particles and extracts. BG was purified from the JCP extract on a BG-specific affinity column, and the percentage extractability was measured using three different BG-specific quantitative methods. The G-test detected 0.4 pg BG in a single JCP particle and 10 fg from a single particle in the extract. The percentage extractability of JCP-derived BG was not significantly different among the three quantitative methods. As the JCP particles should technically have been removed during serum separation, they should be less likely to be a direct false-positive factor. However, given that the LAL-assay-positive substances in the JCP extract were not distinguishable by the three BG-specific quantitative methods, we conclude that they may cause the background to rise. Therefore, in Japan false positives arising from JCP contamination should be considered when testing patients for deep mycosis.     

Symmetric lifting posture recognition of skilled experts with linear discriminant analysis by center-of-pressure velocity

Although it has been well known that novices should train a good lifting posture, there was little way to recognize whether the current posture was good or not based on measured data. The purpose of this paper was to classify the difference between skilled experts working at a freight transport company and unskilled novices without any experience during symmetric lifting by using center-of-pressure (CoP) velocities. All the human subjects performed symmetric lifting experiments with closed eyes; the experiments involved lifting loads (6 and 18 kg) to the upside. Time series data of the CoP position were measured, using a Wii Balance Board, and then, the CoP velocities were calculated. The linear discriminant analysis (LDA) was designed by seven indices which were derived from CoP velocities that reflected the center-of-mass acceleration. The result indicated that the designed LDA discriminated the difference in posture between the two groups with the low error rate (0.100 and 0.017) for classification under 6 and 18 kg. Based on measurement results of CoP trajectories, we inferred that the difference in the CoP velocities between the two groups could be attributed to the difference in the balance ability which means that most skilled experts place their body weight on their rearfeet during symmetric lifting. The LDA classifier designed by CoP velocities was helpful for recognition of the difference between skilled experts and unskilled novices during symmetric lifting. Because the skillful characteristics of experts may be responsible for the lightening of the burden on the waist during lifting, it is considered for the regular check of posture to be helpful for reducing the ratio of occupational low back pain at the workplace.