Column solid‐phase extraction of sunset yellow and spectrophotometric determination of its use in powdered beverage and confectionery products

A new and simple solid‐phase extraction method for the determination of trace levels of sunset yellow has been developed on Diaion HP 2MG column system. The adsorbed sunset yellow on the resin was eluted with 3 mL of methanol and determined by UV–Vis spectrophotometry at 484 nm. Various experimental parameters such as pH, amount of sunset yellow, flow rates of sample and eluent solutions, resin amount, sample volumes, etc. were investigated. The influences of some alkali, alkali earth and transition metals on the recoveries of sunset yellow were investigated. The recovery values for sunset yellow were higher than 95%. Preconcentration factor was found as 150. The detection limit (three sigma) of the reagent blank for sunset yellow was 5.2 μg L^?1. The relative standard deviations (RSD) of the procedure were found as 3.9%. The validation of the presented procedure was performed by the method of standard addition. The procedure was successfully applied to the determination of trace levels of sunset yellow in powdered beverage and confectionery products.     

Effects of Mn and Gd Co-substituted into ZnO on Structural and Magnetic Properties

We have worked on the structural and magnetic properties of Zn_0.99?xMn_0.01Gd _x O _δ (for x = 0.02, 0.03, and 0.04) compounds prepared by using a sol–gel method. The x-ray diffraction, scanning electron microscopy, and energy dispersive x-ray spectroscopy were used to understand the structural properties of the samples. We observed that co-substitution of Mn (1 %) and Gd (2–4 %) into the ZnO does not change the hexagonal structure. Scanning electron microscope (SEM) images show us that the grain size decreases with the increasing amount of the Gd into the ZnO matrix. The magnetic properties of the samples have been investigated by using magnetic hysteresis and DC susceptibility measurements. The ZMG1 sample shows a weak ferromagnetic behavior at room temperature, whereas the ZMG2 and ZMG3 samples exhibit a paramagnetic nature. Furthermore, it is also found that the magnetizations of the samples decrease with increasing Gd content in the ZnMnO system due to the enhancing interaction between Gd ³⁺ ions. We summarize that the co-substitution of Mn and Gd into the ZnO generates a room-temperature ferromagnetism, but it still needs more work to obtain strong and high coercivity magnetic loops for applications.     

Determination of toxic and essential elements in sunflower honey from Thrace Region,Turkey

The aim of this study was to determine the levels of copper (Cu), manganese (Mn), zinc (Zn), iron (Fe), cadmium (Cd), lead (Pb), chromium (Cr), nickel (Ni) and selenium (Se) in sunflower honeys obtained from Thrace Region of Turkey. Trace and toxic element determination was performed by atomic absorption spectrometry after microwave digestion. The accuracy of the method was checked by the standard reference material, NIST‐SRM 1515 Apple leaves. The maximum contents of trace and toxic elements in honey samples from Kesan (polluted area) were found as 0.46, 0.82, 1.98, 14.0, 9.86 μg kg^?1, 0.48 mg kg^?1, 137, 115 and 290 μg kg^?1 for Cu, Mn, Zn, Fe, Cd, Pb, Cr, Ni and Se, respectively.     

On the Refinement Mechanism of Silicon in Al-Si-Cu-Zn Alloy with Addition of Bismuth

Obtained results of micro and nano studies reveal that bismuth refines the silicon in which the flake silicon changed to lamellar structure with reduction in twin spacing from 160 to 75 nm. Bismuth segregates towards the inter-dendritic regions and decreases the Al-Si contact angle resulting in suppression of the silicon growth causing refinement of the eutectic structure. Increased recalescence temperature and time confirmed that the refinement effect is attributed to the growth stage.     

Global and Local Mechanical Properties of Autogenously Laser Welded Ti-6Al-4V

Ti-6Al-4V sheets, 3.2-mm in thickness, were butt welded using a continuous wave 4 kW Nd:YAG laser welding system. The effect of two main process parameters, laser power and welding speed, on the joint integrity was characterized in terms of the joint geometry, defects, microstructure, hardness, and tensile properties. In particular, a digital image correlation technique was used to determine the local tensile properties of the welds. It was determined that a wide range of heat inputs can be used to fully penetrate the Ti-6Al-4V butt joints during laser welding. At high laser power levels, however, significant defects such as underfill and porosity, can occur and cause marked degradation in the joint integrity and performance. At low welding speeds, however, significant porosity occurs due to its growth and the potential collapse of instable keyholes. Intermediate to relatively high levels of heat input allow maximization of the joint integrity and performance by limiting the underfill and porosity defects. In considering the effect of the two main defects on the joint integrity, the underfill defect was found to be more damaging to the mechanical performance of the weldment than the porosity. Specifically, it was determined that the maximum tolerable underfill depth for Ti-6Al-4V is approximately 6 pct of the workpiece thickness, which is slightly stricter than the value of 7 pct specified in AWS D17.1 for fusion welding in aerospace applications. Hence, employing optimized laser process parameters allows the underfill depth to be maintained within the tolerable limit (6 pct), which in turn prevents degradation in both the weld strength and ductility. To this end, the ability to maintain weld ductility in Ti-6Al-4V by means of applying a high energy density laser welding process presents a significant advantage over conventional arc welding for the assembly of aerospace components.