Behaviour of sand–clay mixtures for road pavement subgrade

Materials forming sand grains and colluvial soil deposits have a distinct structure, consisting of a composite matrix of coarse and fine soil grains. The influence of sand grains content on the behaviour of sand–clay mixtures was investigated by a series of intensive laboratory experiments. The California bearing ratio (CBR), unconfined compression strength (UCS) and compaction tests were carried out on various contents of sand and clay mixtures. The sand–clay mixtures were prepared with sand contents of 0, 10, 20, 30, 40, and 50% by weight. The laboratory tests on these mixtures have indicated that their behaviour will depend on the relative concentration of the sand and clay samples. The results of the tests showed a decrease in the UCS, and an increase the CBR values with an increase in the amount of sand. An increase in dry unit weight and a decrease in respective moisture content by an increase in the amount of sand were observed in the compaction tests.     

Indium selenide microrod films: chemical bath deposition from acidic bath

Films of indium selenide was deposited onto glass and indium tin oxide coated glass substrates in acidic medium using chemical bath deposition at room temperature. Indium sulphate and sodium selenosulphate were used as precursors of In³⁺ and Se^2?, respectively. The structural, surface morphological and optical properties of the deposited films were studied. Diffractograms in structural study revealed the deposited material is In₂Se₃ films. Controlled bath conditions resulted in the evolution of the In₂Se₃ microrod-like morphology. The optical band gap of the film was found to be 1.7 eV.     

Enhancing encoding capacity of combinational test stimulus decompressors

While scan-based compression is widely utilized in order to alleviate the test time and data volume problems,the overall compression level is dictated not only by the chain to channel ratio but also the ratio of encodable patterns.Aggressively increasing the number of scan chains in an effort to raise the compression levels may reduce the ratio of encodable patterns,degrading the overall compression level.In this paper,we present various methods to improve the ratio of encodable patterns.These methods are b...     

The mask of (2b + 4)-point n-ary subdivision scheme

In this paper, we present general formulae for the mask of (2b + 4)-point n-ary approximating as well as interpolating subdivision schemes for any integers ${b\,\geqslant\,0}$ and ${n\,\geqslant\,2}$ . These formulae corresponding to the mask not only generalize and unify several well-known schemes but also provide the mask of higher arity schemes. Moreover, the 4-point and 6-point a-ary schemes introduced by Lian [Appl Appl Math Int J 3(1):18–29, 2008] are special cases of our general formulae.     

Congestion prevention in broadband wireless access systems: An economic approach

While the demand for mobile broadband wireless services continues to increase, radio resources remain scarce. Even with the substantial increase in the supported bandwidth in the next generation broadband wireless access systems (BWASs), it is expected that these systems will severely suffer from congestion, due to the rapid increase in demand of bandwidth-intensive multimedia services. Without efficient bandwidth management and congestion control schemes, network operators may not be able to meet the increasing demand of users for multimedia services, and hence they may suffer an immense revenue loss. In this paper, we propose an admission-level bandwidth management scheme consisting of call admission control (CAC) and dynamic pricing. The main aim of our proposed scheme is to provide monetary incentives to users to use the wireless resources efficiently and rationally, hence, allowing efficient bandwidth management at the admission level. By dynamically determining the prices of units of bandwidth, the proposed scheme can guarantee that the number of connection requests to the system are less than or equal to certain optimal values computed dynamically, hence, ensuring a congestion-free system. The proposed scheme is general and can accommodate different objective functions for the admission control as well as different pricing functions. Comprehensive simulation results with accurate and inaccurate demand modeling are provided to show the effectiveness and strengths of our proposed approach.     

Improving cache locking performance of modern embedded systems via the addition of a miss table at the L2 cache level

To confer the robustness and high quality of service, modern computing architectures running real-time applications should provide high system performance and high timing predictability. Cache memory is used to improve performance by bridging the speed gap between the main memory and CPU. However, the cache introduces timing unpredictability creating serious challenges for real-time applications. Herein, we introduce a miss table (MT) based cache locking scheme at level-2 (L2) cache to further improve the timing predictability and system performance/power ratio. The MT holds information of block addresses related to the application being processed which cause most cache misses if not locked. Information in MT is used for efficient selection of the blocks to be locked and victim blocks to be replaced. This MT based approach improves timing predictability by locking important blocks with the highest number of misses inside the cache for the entire execution time. In addition, this technique decreases the average delay per task and total power consumption by reducing cache misses and avoiding unnecessary data transfers. This MT based solution is effective for both uniprocessors and multicores. We evaluate the proposed MT-based cache locking scheme by simulating an 8-core processor with 2 levels of caches using MPEG4 decoding, H.264/AVC decoding, FFT, and MI workloads. Experimental results show that in addition to improving the predictability, a reduction of 21% in mean delay per task and a reduction of 18% in total power consumption are achieved for MPEG4 (and H.264/AVC) by using MT and locking 25% of the L2. The MT results in about 5% delay and power reductions on these video applications, possibly more on applications with worse cache behavior. For the FFT and MI (and other) applications whose code fits inside the level-1 instruction (I1) cache, the mean delay per task increases only by 3% and total power consumption increases by 2% due to the addition of the MT.     

On the qualitative behaviors of solutions of third order nonlinear differential equations

We present some new results about oscillation and asymptotic behavior of solutions of third order nonlinear differential equations of the form

(r₂(t)(r₁(t)y^′)^′)^′+p(t)y^′+q(t)f(y(g(t)))=0.     

Qualitative findings of students’ perception on practice of self-regulated strategies in online community discussion

With rapid emergence to the birth of the knowledge era, an active and interactive learning environment is fundamental to any teaching and learning process. Over time, negative implications of traditional learning environment are mounting, and measures must be taken to challenge it. With extensive research on available learning tools, it has become more feasible to provide our students with better learning opportunities. Such was the anticipation in the Malaysian educational context. Hence, this paper aims to address qualitative findings of a study on self-regulated learning strategies conveyed through the proposed interactive e-learning community (iELC). In duration of eight weeks, students (n = 50) from regular national secondary schools were subjected to online learning tasks aimed to advance strategies on self-regulated learning. To date, strategies of self-regulated learning have been perceived as key to learner to succeed academically and after the schooling years. By means of semi-structured interview, data were collected from small group and one-to-one perception. Results were directed at the overall development of self-regulated learning strategies and its diffusion in the iELC discussion platform. Conclusively, these findings add significantly to the understanding of self-regulated learning strategies in an online learning environment.     

Prediction of performance and exhaust emissions of a diesel engine fueled with biodiesel produced from waste frying palm oil

Biodiesel is receiving increasing attention each passing day because of its fuel properties and compatibility with the petroleum-based diesel fuel (PBDF). Therefore, in this study, the prediction of the engine performance and exhaust emissions is carried out for five different neural networks to define how the inputs affect the outputs using the biodiesel blends produced from waste frying palm oil. PBDF, B100, and biodiesel blends with PBDF, which are 50% (B50), 20% (B20) and 5% (B5), were used to measure the engine performance and exhaust emissions for different engine speeds at full load conditions. Using the artificial neural network (ANN) model, the performance and exhaust emissions of a diesel engine have been predicted for biodiesel blends. According to the results, the fifth network is sufficient for all the outputs. In the fifth network, fuel properties, engine speed, and environmental conditions are taken as the input parameters, while the values of flow rates, maximum injection pressure, emissions, engine load, maximum cylinder gas pressure, and thermal efficiency are used as the output parameters. For all the networks, the learning algorithm called back-propagation was applied for a single hidden layer. Scaled conjugate gradient (SCG) and Levenberg–Marquardt (LM) have been used for the variants of the algorithm, and the formulations for outputs obtained from the weights are given in this study. The fifth network has produced R² values of 0.99, and the mean % errors are smaller than five except for some emissions. Higher mean errors are obtained for the emissions such as CO, NO_x and UHC. The complexity of the burning process and the measurement errors in the experimental study can cause higher mean errors.     

PETOOL: MATLAB-based one-way and two-way split-step parabolic equation tool for radiowave propagation over variable terrain

A MATLAB-based one-way and two-way split-step parabolic equation software tool (PETOOL) has been developed with a user-friendly graphical user interface (GUI) for the analysis and visualization of radio-wave propagation over variable terrain and through homogeneous and inhomogeneous atmosphere. The tool has a unique feature over existing one-way parabolic equation (PE)-based codes, because it utilizes the two-way split-step parabolic equation (SSPE) approach with wide-angle propagator, which is a recursive forward–backward algorithm to incorporate both forward and backward waves into the solution in the presence of variable terrain. First, the formulation of the classical one-way SSPE and the relatively-novel two-way SSPE is presented, with particular emphasis on their capabilities and the limitations. Next, the structure and the GUI capabilities of the PETOOL software tool are discussed in detail. The calibration of PETOOL is performed and demonstrated via analytical comparisons and/or representative canonical tests performed against the Geometric Optic (GO) + Uniform Theory of Diffraction (UTD). The tool can be used for research and/or educational purposes to investigate the effects of a variety of user-defined terrain and range-dependent refractivity profiles in electromagnetic wave propagation.

Program summary

Program title: PETOOL (Parabolic Equation Toolbox)Catalogue identifier: AEJS_v1_0Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEJS_v1_0.htmlProgram obtainable from: CPC Program Library, Queen?s University, Belfast, N. IrelandLicensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.htmlNo. of lines in distributed program, including test data, etc.: 143 349No. of bytes in distributed program, including test data, etc.: 23 280 251Distribution format: tar.gzProgramming language: MATLAB (MathWorks Inc.) 2010a. Partial Differential Toolbox and Curve Fitting Toolbox requiredComputer: PCOperating system: Windows XP and VistaClassification: 10Nature of problem: Simulation of radio-wave propagation over variable terrain on the Earth?s surface, and through homogeneous and inhomogeneous atmosphere.Solution method: The program implements one-way and two-way Split-Step Parabolic Equation (SSPE) algorithm, with wide-angle propagator. The SSPE is, in general, an initial-value problem starting from a reference range (typically from an antenna), and marching out in range by obtaining the field along the vertical direction at each range step, through the use of step-by-step Fourier transformations. The two-way algorithm incorporates the backward-propagating waves into the standard one-way SSPE by utilizing an iterative forward–backward scheme for modeling multipath effects over a staircase-approximated terrain.Unusual features: This is the first software package implementing a recursive forward–backward SSPE algorithm to account for the multipath effects during radio-wave propagation, and enabling the user to easily analyze and visualize the results of the two-way propagation with GUI capabilities.Running time: Problem dependent. Typically, it is about 1.5 ms (for conducting ground) and 4 ms (for lossy ground) per range step for a vertical field profile of vector length 1500, on Intel Core 2 Duo 1.6 GHz with 2 GB RAM under Windows Vista.