Synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone) grafted sodium alginate hydrogel beads for the controlled release of indomethacin

Graft copolymers of sodium alginate (NaAlg) with N‐vinyl‐2‐pyrrolidone were prepared using azobisisobutyronitrile as initiator. The graft copolymers (NaAlg‐g‐PVP) were characterized with Fourier transform infrared spectroscopy, elemental analysis, and differential scanning calorimetry. Polymeric hydrogel beads of NaAlg and NaAlg‐g‐PVP were prepared by crosslinking method using glutaraldehyde (GA) as a crosslinker in the hydrochloric acid catalyst (HCl) and these beads were used to deliver anti‐inflammatory drug, indomethacin (IM). Chemical stability of the IM after encapsulation into beads was confirmed by FTIR. Preparation conditions of the NaAlg‐g‐PVP beads were optimized by considering the percentage entrapment efficiency, particle size, swelling capacity and their release data. In vitro release studies were performed in simulated gastric fluid (pH 1.2) for the initial 2 h, followed by simulated intestinal fluid (pH 7.4) for 4 h. Effects of GA concentration, exposure time to GA, drug/polymer (d/p) ratio, and concentration of HCl on the release of IM were discussed. It was observed that IM release from the beads decreased with increasing GA concentration and exposure time. IM release also decreases with increasing d/p ratio and HCl concentration. The highest IM release was obtained to be 77% for beads crosslinked with 0.027M GA. Swelling experiments were also performed to compute molecular mass between crosslinks of the beads. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Accurate and simple synthesis formulas for coplanar waveguides

Simple and accurate closed‐form formulas obtained by using a differential evolution algorithm are presented for the synthesis of coplanar waveguides (CPW). The results of the synthesis formulas proposed in this article are compared with those of the quasi‐static analysis, the synthesis formulas reported by the other researchers and also the experimental works available in the literature. The accuracy of the proposed synthesis formulas is found to be better than 0.75% for 9256 CPWs samples. © 2008 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2008.     

Excavation and support design of the Dicle–Kralkizi water tunnel: an overview

Tunneling projects have their uniqueness in terms of engineering problems. The expertise gained from analyzing these projects establishes a sound basis for future application. This paper conveys experiences gained during the construction and support of the design of the Dicle–Kralkizi water tunnel, Turkey. Tunnel stability problems including overbreaks and surface subsidence are evaluated. An analysis of the breakdowns, factors controlling advance rate and the overall performance of tunnel are covered. The accumulated information presented here is believed to be useful and reliable for a successful tunnel excavation in similar formations.     

Time jitter analysis of 1-bit sigma-delta synthesizer

This letter presents a general analysis of time jitter in sigma-delta synthesizer. One of the practical applications of 1-bit sigma-delta systems is a generation of high-resolution local oscillator (LO) signals. In order to generate LO signals, one may use a single-bit sigma-delta technique to encode sine waves. Today, direct generation of high-frequency sine wave using a clock with higher frequency, is possible. In this letter, we will analyze different LO signal generators and develop a practical way of computation to decide how to choose the best configuration under minimum degradation of signal-to-noise ratio (SNR) at the output.     

Ultrasonic study of molecular association of poly(vinyl chloride) solution in tetrahydrofuran

Ultrasonic absorption, velocity, adiabatic compressibility, relaxation time and relaxation amplitude measurements are reported on poly(vinyl chloride) (PVC) solution in tetrahydrofuran (THF) using pulsed ultrasonic apparatus operating at 2 MHz and 313 K. Results show a linear increase of velocity. density, viscosity, absorption coefficient, relaxation time and relaxation amplitude values with the increase of PVC concentration in THF. In contrast the compressibility decreases with increasing PVC concentration. This suggests interaction between PVC and THF molecules.     

Temperature-dependent diffusion coefficient of soluble substances during ethanol extraction of clove

The temperature dependence of the diffusion coefficient of ethanol-soluble substances from ground cloves (particle size 250 μm) during extraction was estimated by fitting batch extraction data at several temperatures (27.8, 40, 50, and 60°C) to a previously developed mass transfer model. The model was based on spherical geometry of particles. Nonlinear regression analysis was used to develop an equation that describes the diffusivity as a function of temperature. The temperature dependence ofD _A was of the Arrhenius type.     

Quantitative preparation of long chain thioethers from an oxo-trans-2-enoic ester and a 9,12-dioxo-trans-10-enoic acid

Branched-chain thioethers have been prepared from methyl 4-oxo-trans-2-hexadecenoate and 9,12-dioxo-trans-10-octadecenoic acid. The reagents involved in these preparations were mercaptoacetic and mercaptopropionic acids. The yields of these thioethers are almost quantitative.     

Role of sand on curing of partex surface by UV radiation

A partex surface was modified by a UV‐curing system with epoxy acrylate (EB‐600). A set of formulations was prepared with oligomer and the trifunctional monomer trimethylol propane triacrylate in different combinations of percentages (1–5%) of sand to study the role of sand in various physical properties of UV‐cured thin films, as well as partex surfaces. Increased pendulum hardness (PH), gloss, adhesion, and abrasion values were obtained by the addition of sand into the partex surfaces. The best results were obtained with the formulation containing 3% sand. An enhanced PH and a decreased percentage of gel content of the UV‐cured film was observed with an increase of the sand concentration. A simulated weathering test was performed with partex surfaces cured by a formulation containing 3% sand in the base coat. The losses of the physical properties were found to be lower over the surface treated with the formulation containing sand. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2385–2392, 2002     

Effect of competitive interference on the biosorption of lead(II) by Chlorella vulgaris

Batch experiments were carried out to asses the effect of Cu(II) and Zn(II) on the biosorption of lead(II) ions by non-living Chlorella vulgaris. The uptake of Pb(II) was examined for single, binary and ternary solutions at different initial concentrations and different pH values. The experimental results showed that the uptake increased with increasing pH from 3.0 to an optimum value of 5.0. The biosorption of Pb(II) was found to be adversely affected by the presence of Cu(II) ions, while Zn(II) ions seemed to have negligible effect on the process. The equilibrium data were fitted to four isotherm models: Langmuir, Freundlich, Sips and Dubinin–Radushkevich; the Sips isotherm gave the best fit for the data. Modeling of the controlling mechanisms indicated that both intrinsic kinetics and mass transfer played major roles in controlling the process. A new dimensionless parameter, Ψ, was defined to asses the relative contributions of the two mechanisms to the biosorption of lead(II). Mass transfer seemed to be the dominant mechanism at low initial lead(II) concentrations, while intrinsic kinetics dominates at high concentrations.