Mechanical behavior of SiC joints brazed using an active Ag‐Cu‐In‐Ti braze at elevated temperatures

The behavior of SiC ceramic joints brazed with commercially available Incusil ABA (Ag‐32.25Cu‐12.5In‐1.25Ti, in wt.%) was characterized especially with respect to the mechanical performance at temperatures up to 550°C using four‐point bending and torsional shear tests. The failure mechanisms with changing temperature were investigated with the aid of fractography. Additionally, the microstructure of brazed specimens was characterized in detail by high resolution scanning electron microscopy. The test geometry and setup for the high temperature torsional shear test is presented. The change in mechanical behavior of the joints as a function of temperature is shown and discussed. The brazed joints interestingly showed that flexural bending strength was maintained with only a small decrease up to 300°C. Above 300°C, the bending strength decreased much faster. For the first time, this joint system was characterized in torsional shear test at temperatures up to 550°C to achieve the intrinsic shear strength values. Very strong joints were achieved, resulting in failure through the ceramic base materials up to (torsional shear) testing temperatures of 400°C. The results indicate that SiC joints brazed with Incusil ABA exhibit excellent mechanical performance for applications up to 300°C.     

Modeling and validating Mondex scenarios described in UML and OCL with USE

This paper describes the Mondex case study with UML class diagrams and restricting OCL constraints. The constraints have been formulated either as OCL class invariants or as OCL pre- and postconditions. The proposed two models include UML class diagrams and OCL constraints which have been checked by the UML and OCL tool USE (UML-based Specification Environment). USE allows validation of a model by testing it with scenarios. The Mondex case study has been validated by positive and negative test cases. The test cases allow the validity of the various constraints to be traced and checked. Validation results are presented as textual protocols or as UML sequence diagrams where starting, intermediate, and resulting system states are represented by UML object diagrams. UML sequence diagrams, UML object diagrams, and textual protocols are shown with varying degrees of detail for the attributes, constraints, and executed commands. J. C. P. Woodcock     

Low Ozone Concentrations Differentially Affect the Structural and Functional Features of Non-Activated and Activated Fibroblasts In Vitro

Oxygen–ozone (O₂–O₃) therapy is increasingly applied as a complementary/adjuvant treatment for several diseases; however, the biological mechanisms accounting for the efficacy of low O₃ concentrations need further investigations to understand the possibly multiple effects on the different cell types. In this work, we focused our attention on fibroblasts as ubiquitous connective cells playing roles in the body architecture, in the homeostasis of tissue-resident cells, and in many physiological and pathological processes. Using an established human fibroblast cell line as an in vitro model, we adopted a multimodal approach to explore a panel of cell structural and functional features, combining light and electron microscopy, Western blot analysis, real-time quantitative polymerase chain reaction, and multiplex assays for cytokines. The administration of O₂–O₃ gas mixtures induced multiple effects on fibroblasts, depending on their activation state: in non-activated fibroblasts, O₃ stimulated proliferation, formation of cell surface protrusions, antioxidant response, and IL-6 and TGF-β1 secretion, while in LPS-activated fibroblasts, O₃ stimulated only antioxidant response and cytokines secretion. Therefore, the low O₃ concentrations used in this study induced activation-like responses in non-activated fibroblasts, whereas in already activated fibroblasts, the cell protective capability was potentiated.     

Combined Replenishment of miR‐34a and let‐7b by Targeted Nanoparticles Inhibits Tumor Growth in Neuroblastoma Preclinical Models

Neuroblastoma (NB) tumor substantially contributes to childhood cancer mortality. The design of novel drugs targeted to specific molecular alterations becomes mandatory, especially for high‐risk patients burdened by chemoresistant relapse. The dysregulated expression of MYCN, ALK, and LIN28B and the diminished levels of miR‐34a and let‐7b are oncogenic in NB. Due to the ability of miRNA‐mimics to recover the tumor suppression functions of miRNAs underexpressed into cancer cells, safe and efficient nanocarriers selectively targeted to NB cells and tested in clinically relevant mouse models are developed. The technology exploits the nucleic acids negative charges to build coated‐cationic liposomes, then functionalized with antibodies against GD₂ receptor. The replenishment of miR‐34a and let‐7b by NB‐targeted nanoparticles, individually and more powerfully in combination, significantly reduces cell division, proliferation, neoangiogenesis, tumor growth and burden, and induces apoptosis in orthotopic xenografts and improves mice survival in pseudometastatic models. These functional effects highlight a cooperative down‐modulation of MYCN and its down‐stream targets, ALK and LIN28B, exerted by miR‐34a and let‐7b that reactivate regulatory networks leading to a favorable therapeutic response. These findings demonstrate a promising therapeutic efficacy of miR‐34a and let‐7b combined replacement and support its clinical application as adjuvant therapy for high‐risk NB patients.     

Catalytic chemical vapor deposition of single-wall carbon nanotubes at low temperatures

We report surface-bound growth of single-wall carbon nanotubes (SWNTs) at temperatures as low as 350 degrees C by catalytic chemical vapor deposition from undiluted C2H2. NH3 or H2 exposure critically facilitates the nanostructuring and activation of sub-nanometer Fe and Al/Fe/Al multilayer catalyst films prior to growth, enabling the SWNT nucleation at lower temperatures. We suggest that carbon nanotube growth is governed by the catalyst surface without the necessity of catalyst liquefaction.     

Fe(lll)-enhanced sonochemical degradation of methylene blue in aqueous solution

The sonochemical degradation rate of Methylene Blue (MB) is markedly increased in the presence of Fe(Ill), a rather inexpensive reagent for the application of sonochemistry to wastewater treatment. The effect of Fe(lll) is due to a sonochemically induced Fenton reaction, where both reactants (Fe(ll) and H2O2) are sonochemically synthesized. Hydroperoxide/superoxide, generated upon sonochemical processes in aerated solution, is a key species involved in both Fe(lll) reduction to Fe(ll) and in the production of H2O2. The Fenton reaction between Fe(ll) and H2O2 then produces hydroxyl radicals, enhancing the degradation of MB. A further enhancement of the degradation of the substrate in the presence of Fe(lll) takes place upon addition of H2O2, which is likely to favor the Fenton process. Interestingly, H2O2 alone, in the absence of Fe(lll), has a very limited effect on the sonochemical degradation rate.     

Adaptive-randomised self-calibration of electro-mechanical shutters for space imaging

This work describes the self-calibration of a high-precision open-loop mechanism. The self-calibration method is applied to a mechanical shutter for space applications, which was launched onboard the ESA-ROSETTA mission (launch: 2 March 2004). It is based on an adaptive ‘model reference’ and a ‘randomised’ search method which may be generalised to applications in which high performance and functionality are strongly interconnected. The method makes use of an adaptive ‘model-reference’ control approach [K.J. Astrom, B. Wittenmark, On self-tuning regulators Automatica 9 (1973) 185–199 [16]; K.J. Astrom, Theory and application of adaptive control, in: Proceedings of the Eighth IFAC World Conference, Kyoto, Japan, 1981 [17]; D.E. Seborg, S.L. Shah, T.F. Edgar, Adaptive control strategies for process control, AIChE Journal 6(32) (1986) 881–895 [18]] to guarantee mechanism performance. The proposed control system comprises both a deterministic adaptive part and a random-search one [K.L. Clarkson, Applications of random sampling in computational geometry, II, in: Proceedings of the Fourth Annual ACM Symposium on Computational Geometry, 1998, pp. 1–11 [19]; P.K. Agarwal, M. Sharir, Efficient randomised algorithms for some geometric optimisation problems, Discrete Computational Geometry 16 (1996) 317–337 [15]] to guarantee shutter mechanism functionality and performance over testing lifetime (5×10⁴ cycles).