THERMAL RESPONSE OF SILICON CRYSTAL TO PICO-FEMTOSECOND HEAT PULSE BY MOLECULAR DYNAMICS

We investigate the thermal response of a silicon crystal irradiated by a pico-femto heat pulse by using molecular dynamics technique and a linear response theory–based statistical analysis. The thermal susceptibility is first defined in terms of computed quantities and then convoluted with time Gaussian temperature pulses. The qualitative difference between the responses to various pulse durations is explained and the results are compared to those of classical Fourier model. Non-Fourier behaviors are emphasized and a mean phonon relaxation time is identified.     

Ab Initio Calculations and Measurements of Thermoelectric Properties of V2O5 Films

Density functional theory and the Boltzmann transport equation were used to calculate the thermoelectric transport coefficients for bulk V₂O₅ and MV₂O₅ (M = Cr, Ti, Na, Li). The structural relaxation for the given compounds based on the ABINIT code was observed. The temperature dependences of the Seebeck coefficients as well as electrical and thermal electrical conductivities of all relaxed structures displayed anisotropic behavior. Electrooptical measurements of thermoelectric properties were carried out on V₂O₅ thin films obtained by thermal evaporation with different post-annealing treatments. A Seebeck coefficient of ?148 μV/K at T = 300 K was obtained in the in-plane direction for V₂O₅ thin films with thickness less than 100 nm.     

SIRTF cryostat requirements and development

The Space Infrared Telescope Facility (SIRTF) is the last of NASA’s four great observatories, scheduled for launch in 2001. At the heart of the SIRTF observatory is a 363 l, superfluid helium cryostat, designed and built by Ball Aerospace & Technologies, Inc. The cryostat houses provides the direct cooling of the three scientific instruments which will observe the infrared universe. One major innovation of the SIRTF observatory is that the instrument optics are launched warm, and cooled down on orbit to the final operating temperature of 5 K by radiation to space and direct vapor cooling by the effluent helium. To accomplish this the cryostat system design includes two cryogenic mechanisms, and must meet stringent cold alignment requirements, in addition to the thermal and mechanical performance requirements typical for space flight cryostats. Currently the cryostat is completing the fabrication and assembly process, and will go into performance testing as a system in the second half of 1999. We present here the design requirements, production development of the SIRTF cryostat, and the predicted ground and on-orbit performance.     

Properties of new nanocomposite triblock copolymer gels based on expandable graphite

In this work, we investigated the effect of expandable graphite (EG) on the property of triblock copolymer prepared from a poly(styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene) (SEBS) imbibed with an EB‐compatible hydrocarbon oil. The rheological properties showed that at a temperature between 30 and 40°C below the gel point, the triblock copolymer gels had a dynamic storage modulus (G′) greater than loss modulus (G‵), thereby indicating that at ambient temperature, a physical network is still present in spite of the addition of nanoparticles. Dynamic rheological measurements of the resultant nanocomposite triblock copolymer gels confirmed that the addition of EG affects the linear viscoelastic properties and maximum operating temperature of the parent triblock copolymer gels. The mechanical properties showed only marginal increase, which can be attributed to the poor dispersion that leads to agglomeration of particle into micrometer size stacks, and thus the particles behave only as inorganic fillers. The morphology and X‐ray diffraction revealed that the EG used to generate nanocomposite triblock copolymer gels is dispersed generally within the swollen copolymer and/or solvent. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Design of a Co–Al–W–Ta Alloy Series with Varying γ′ Volume Fraction and Their Thermophysical Properties

Metallurgical and Materials Transactions A - The γ′ volume fraction is a key parameter in precipitation-strengthened Co- and Ni-base superalloys and mainly determines the alloys’...     

Effects of hydrologic infrastructure on flow regimes of California's Central Valley rivers: Implications for fish populations

Alteration of natural flow regimes is generally acknowledged to have negative effects on native biota; however, methods for defining ecologically appropriate flow regimes in managed river systems are only beginning to be developed. Understanding how past and present water management has affected rivers is an important part of developing such tools. In this paper, we evaluate how existing hydrologic infrastructure and management affect streamflow characteristics of rivers in the Central Valley, California and discuss those characteristics in the context of habitat requirements of native and alien fishes. We evaluated the effects of water management by comparing observed discharges with estimated discharges assuming no water management (‘full natural runoff’). Rivers in the Sacramento River drainage were characterized by reduced winter–spring discharges and augmented discharges in other months. Rivers in the San Joaquin River drainage were characterized by reduced discharges in all months but particularly in winter and spring. Two largely unaltered streams had hydrographs similar to those based on full natural runoff of the regulated rivers. The reduced discharges in the San Joaquin River drainage streams are favourable for spawning of many alien species, which is consistent with observed patterns of fish distribution and abundance in the Central Valley. However, other factors, such as water temperature, are also important to the relative success of native and alien resident fishes. As water management changes in response to climate change and societal demands, interdisciplinary programs of research and monitoring will be essential for anticipating effects on fishes and to avoid unanticipated ecological outcomes. Published in 2009 by John Wiley & Sons, Ltd.     

Chromium Oxide Reduction from Slag by Silicon and Magnesium

Experimental and theoretical studies were performed in order to estimate the effect of the basicity of the slag as well as the amount of reducing agents on the reduction of chromium oxide from a slag in contact with molten steel at 1600 °C. The aim of this work was to compare the efficiency of magnesium and silicon as reducing agents of Cr₂O₃. The slag system contained CaO, MgO, SiO₂, CaF₂ and Cr₂O₃ together with Fe‐alloys (Fe‐Si or Fe‐Si‐Mg). The maximum Cr yield was about 81% with Fe‐44%Si‐9%Mg and 88% with Fe‐75%Si. That means that the reducing effect of Mg was much better than that of Si. Some experiments were conducted to study the effect of initial Cr in steel on the chromium oxide reduction reaction. Three initial Cr contents were tested (0.15, 2 and 4 mass%). It was found that chrome was partially bound into stable spinel phase MgO·Cr₂O₃ in the final slag. Thermodynamic estimations were made to determine the effect of process temperature, slag basicity and the amount of reducing agents in the slag on the Cr recovery. The efficiency of Cr reducing agents increased in the order: Si, Al, Ca and Mg. The Cr yield increased with slag basicity and amount of reducing agents.     

Real-time software methodologies: Are they suitable for developing Manufacturing control software?

Computer-Integrated Manufacturing (CIM) systems may be classified as real-time systems. Hence, the applicability of methodologies that are developed for specifying, designing, implementing, testing, and evolving real-time software is investigated in this article.The paper highlights the activities of the software development process. Among these activities, a great emphasis is placed on automating the software requirements specification activity, and a set of formal models and languages for specifying these requirements is presented. Moreover, a synopsis of the real-time software methodologies that have been implemented by the academic and industrial communities is presented together with a critique of the strengths and weaknesses of these methodologies.The possible use of the real-time methodologies in developing the control software of efficient and dependable manufacturing systems is explored. In these systems, efficiency is achieved by increasing the level of concurrency of the operations of a plan, and by scheduling the execution of these operations with the intent of maximizing the utilization of the devices of their systems. On the other hand, dependability requires monitoring the operations of these systems. This monitoring activity facilitates the detection of faults that may occur when executing the scheduled operations of a plan, recovering from these faults, and, whenever feasible, resuming the original schedule of the system.The paper concludes that the set of surveyed methodologies may be used to develop the real-time control software of efficient and dependable manufacturing systems. However, an integrated approach to planning, scheduling, and monitoring the operations of these systems will significantly enhance their utility, and no such approach is supported by any of these methodologies.     

Investigation of urea oxidation as a potential anode reaction during CO2 electrolysis

Journal of Applied Electrochemistry - The electrooxidation of urea was investigated on Ni90Fe10 electrodeposited films as an alternative reaction to the oxygen evolution reaction (OER) during CO2...     

Four different approaches for the measurement of IC surface temperature: application to thermal testing

Silicon die surface temperature can be used to monitor the health state of digital and analogue integrated circuits (IC). In the present paper, four different sensing techniques: scanning thermal microscope, laser reflectometer, laser interferometer and electronic built-in differential temperature sensors are used to measure the temperature at the surface of the same IC containing heat sources (hot spots) that behave as faulty digital gates. The goal of the paper is to describe the techniques as well as to present the performances of these sensing methods for the detection and localisation of hot spots in an IC.