Magnetic and nonmagnetic impurities in some A-15 structure systems. II. Magnetic properties

We present measurements of the susceptibility of the A-15 structure systems NbyPt_100–y–x M _x where M = Fe and Ru (y = 73–78). These measurements correlated with those of the critical temperature T _c permit us to conclude that there is a saturation of the effective number of magnetic impurity atoms and that these atoms are situated on the chains. We find also that the magnetic moment of the Fe atoms depend on the value of y. The high value of the Curie temperature and its variation is discussed with the aid of a model of pairs with antiferromagnetic interaction. In order to describe the formation of the localized moments we have taken into account the effect of the environment around each impurity. Depending on the number and the nature of the nearest neighboring atoms, we deduce a magnetic or nonmagnetic behavior of the impurity. The variation of the moment as a function of the nearest neighbors is explained by supposing electronic redistribution between the atoms, which is the same as supposing an interatomic charge transfer.     

Analysis of temperature-dependent optical gain in GaN-InGaN quantum-well structures

The temperature dependent spectral gain in InGaN-GaN multiple quantum-well structures with 10% In content is investigated. Mode gain is measured in a temperature range between 239 K and 312 K using the Hakki-Paoli technique and compared to simulations. The simulation accounts for temperature-dependent polarization dephasing, and hence homogeneous broadening, in a rigorous fashion, without any fit parameter. It is found that the evolution of the gain spectrum with temperature at different drive currents can be modeled using a temperature-independent single value for inhomogeneous broadening. The resulting compositional fluctuations are compared to structural measurements.     

A Study on the Buckling Behaviour of Strips and Plates with Residual Stresses

During and after rolling or flattening of metal strips and plates the permissible deviations from flatness are described by the permissible absolute wave height and the flatness index. Both values can be determined on a measuring table while the material is not subjected to global tension. Because this procedure is expensive, time‐consuming and allows measurement only at discrete positions along the strip length, on‐line flatness measuring systems are used which can detect the distribution of longitudinal tensile stresses distributed across the strip width allowing for the calculation of the flatness index. This value does not always agree with the value obtained directly by measuring on the table even when the measurement of the longitudinal tensile stress distribution operates perfectly. It can be shown that the measurement of the tensile stress distribution does not give a direct indication on the wave height in the tension‐free state determined on the measuring table. To explain the relationship between tensile stress distribution in the strip and the flatness measurement on the measuring table, the buckling behavior is analysed both with and without dead load for simple symmetrical residual stress distributions resulting, e.g., from the rolling process. Based on the knowledge of the distribution of the longitudinal residual stresses across the strip width, the flatness index and the wave height can be determined by using a specialized finite element model. If the direct measurement is performed under action of dead load, large differences between the directly and indirectly obtained flatness index are observed. Below a certain limit of the intensity of the residual stress distribution the strips and plates lie flat on the measuring table. Above this limit the strip lying on the table exhibits post‐bucking deformations. In the latter case, the wave height increases with strip thickness and intensity of residual stresses.     

Crack Tip Shielding or Anti-shielding due to Smooth and Discontinuous Material Inhomogeneities

This paper describes a theoretical model and related computational methods for examining the influence of inhomogeneous material properties on the crack driving force in elastic and elastic-plastic materials. Following the configurational forces approach, the crack tip shielding or anti-shielding due to smooth (e.g. graded layer) and discontinuous (e.g. bimaterial interface) distributions in material properties are derived. Computational post-processing methods are described to evaluate these inhomogeneity effects. The utility of the theoretical model and computational methods is demonstrated by examining a bimaterial interface perpendicular to a crack in elastic and elastic-plastic compact tension specimens.     

Science and technology in the region: The output of regional science and technology, its strengths and its leading institutions

Summary We operationalize scientific output in a region by means of the number of articles (as in the SciSearch database) per year and technology output by means of the number of patent applications (as in the database of the European Patent Office) per priority year. All informetric analyses were done using the DIALOG online-system. The main research questions are the following: Which scientific and technological fields or topics are most influent within a region and which institutions or companies are mainly publishing articles or holding patents? Do the distributions of regional science and technology fields and of publishing institutions follow the well-known informetric function? Are there - as it is expected - only few fields and few institutions which dominate the region? Is there a connection between the economic power of a region and the regional publication and patent output? Examples studied in detail are seven German regions: Aachen, Düsseldorf, Hamburg, Köln (Cologne), Leipzig - Halle - Dessau, München (Munich), and Stuttgart. Three different indicators were used, science and technology attraction of a region (number of scientific articles and patents), science and technology intensity (articles and patents per 1,000 inhabitants), and science and technology density (articles and patents per 1 billion EURO gross value added). Top region concerning both attraction and intensity is Munich, concerning density it is Aachen.     

Conservative availability analyses including dependent failures in redundant I&C-systems with recurrent tests

In this paper analytic formulae are derived to estimate conservatively the unavailability of a two out of four digital safety Instrumentation and Control (I&C) system with recurrent tests. The analytic formulae disclose the influence of the different parameters on the system’s unavailability. In particular, the choice of a proper test interval is essential to guarantee the required low unavailability. The extraordinary self-checking capabilities of digital systems are taken into account by use of an appropriate failure model together with the treatment of dependent failures of the integrated software–hardware system. The underlying methodology is approved by licensing experts of nuclear facilities in Germany.     

Path-based clustering for grouping of smooth curves and texture segmentation

Perceptual grouping organizes image parts in clusters based on psychophysically plausible similarity measures. We propose a novel grouping method in this paper, which stresses connectedness of image elements via mediating elements rather than favoring high mutual similarity. This grouping principle yields superior clustering results when objects are distributed on low-dimensional extended manifolds in a feature space, and not as local point clouds. In addition to extracting connected structures, objects are singled out as outliers when they are too far away from any cluster structure. The objective function for this perceptual organization principle is optimized by a fast agglomerative algorithm. We report on perceptual organization experiments where small edge elements are grouped to smooth curves. The generality of the method is emphasized by results from grouping textured images with texture gradients in an unsupervised fashion.     

Photoresist application for the LIGA process

 Fabrication of high aspect ratio structures requires the use of a photoresist able to form a mold with vertical sidewalls. Thus the photoresist should have a high selectivity between the exposed and the unexposed area in the developer. It should be relatively free from stress when applied in thick layers necessary to make high aspect ratio structures. PMMA (Poly Methyl Methacrylate) is the photoresist of choice in the LIGA process, mainly for its ability to hold vertical sidewalls for tall structures. It is applied to the substrate by a glue-down process in which a pre-cast, high molecular weight, sheet of PMMA is attached to the plating base on a substrate. The applied photoresist is then milled down to the precise height by a fly-cutter prior to pattern transfer by x-ray exposure. The requirement that the applied layer be relatively free from stress dictates the choice of glue-down over casting. The substrate preparation steps, as well as the conditioning of the PMMA sheet prior to the glue-down, are done, in part, to reduce the stress in the glued down sheet of photoresist. The cutting of the PMMA sheet in the fly-cutter requires specific operating conditions as well as particular cutting tools to avoid introducing any stress and the resultant crazing of the photoresist. Received: 25 August 1997/Accepted: 3 September 1997     

Anti-scattering X-ray grid

 Various optical or x-ray applications require reduction of scattered radiation on the imaging detector to produce sharper images. The scattered radiation is reduced when the radiation impacting on the detector is from a chosen small solid angle. This requires a mask in front of the detector with small holes and high aspect ratio. We are applying the SLIGA process to perform a proof-of-principle demonstration with the capability of making a large and high area anti-scattering grid. The approach is by assembling and stacking small pieces of grid. To maintain high throughput of the desired radiation, the wall of the grid has to be thin. We designed and fabricated four grid patterns all with 20 μm thick walls and 80 μm×80 μm holes. The individual pieces were 210 μm high and made of nickel. The pieces were assembled and stacked to make a 5 mm×5 mm grid 2.1 mm high. Much larger grids can be made by the SLIGA process, which was chosen because of its capability to fabricate high aspect ratio devices with precision. Received: 25 August 1997/Accepted: 24 October 1997     

Grounding and ground fault protection of multiple generator installations on medium-voltage industrial and commercial power systems - Part 4: Conclusion and Bibliography Working Group Report

This paper discusses typical grounding practices and ground fault protection methods for medium-voltage generator stators, highlighting their merits and drawbacks. Particular attention is given to applications of multiple generators connected to a single bus. The paper also provides an overview of the generator damage mechanism during stator ground faults. Problem areas associated with each type of grounding are identified and solutions are discussed. The paper also provides a list of references on the topic. The paper is intended as a guide to aid engineers in selecting adequate grounding and ground fault protection schemes for medium-voltage industrial and commercial generators for new installations, for evaluating existing systems, and for future expansion of facilities, to minimize generator damage from stator ground faults. These topics are presented in four separate parts, Parts 1-4. Part 1 covers scope, introduction, user examples of stator ground failure, and theoretical basis for the problem. Part 2 discusses various grounding methods used in industrial applications. Part 3 describes protection methods for the various types of grounding and Part 4 provides a conclusion and bibliography of additional resource material.