Multichannel Security Protocols

Multichannel security protocols transmit messages over multiple communication channels, taking into account each channel's security properties. Our first intentional use of these protocols goes back to a 1999 article that proposed physical contact for imprinting as opposed to the wireless channel used in subsequent operations. Only later did we understand three key points. First, explicit use of multiple channels in the same protocol can offer significant advantages for both security and usability. Second, explicitly stating the properties of the channel on which each protocol message is transmitted is useful for understanding one's own protocol in greater depth and therefore for addressing subtle vulnerabilities early on. Third, multichannel protocols existed long before we recognized them as such - think of the courier handcuffed to the briefcase carrying the code book that will later protect postal or telegraphic traffic. The paper presents a security protocol that exploit additional transmissions over lower-capacity channels, typically found in ubicomp environments, that offer a different combination of security properties.     

掺Nd纳米ZnO薄膜特性研究

研究了用真空蒸发法在玻璃衬底上制备稀土掺杂纳米ZnO薄膜结构、导电性及光透射性能。结果显示 ,在 5 0 0℃氧化、热处理稀土元素Nd掺杂后能够明显改善纳米ZnO薄膜的结构特性 ,薄膜的晶粒尺寸随掺杂含量的增加而减小。掺Nd使ZnO薄膜的电性能有所改善但使纳米ZnO薄膜的光透射性有所降低。     

Wideband HEMT MMIC low-noise amplifier with temperaturecompensation

A wideband low-noise pseudomorphic HEMT MMIC variable-gain amplifier has been designed and fabricated. The amplifier has a nominal gain of 13 dB across the band 2-20 GHz, with gain flatness better than ±0.4 dB. The noise figure is less than 3 dB across the band 6-16 GHz. An on-chip temperature-sensing diode is used to provide a linear temperature correction which has been used to reduce the gain variation of the amplifier by a factor of 2 across the temperature range -50°C to +95°C     

润滑油抗氧剂的作用机理

简介了润滑油使用过程中导致其氧化的影响因素和所形成氧化物对使用性能的影响，以及润滑油基础油的氧化机理，叙述了酚类、胺类、有机铜盐、有机硫、烷基硫代氨基甲酸盐、有机磷、硫代苯并三氮唑、硒化物抗氧剂的抗氧化作用机理。     

Large-signal phase retardation with a poled electrooptic fiber

A linear electrooptic coefficient of 0.3 pm/V is induced in a germanosilicate fiber by thermal/electric-field poling. Reducing the fiber thickness by simple mechanical polishing following the poling, leads to a half-wave drive voltage of only 75 V for a 12-cm active length with no measurable linear optical loss in the fiber. The induced linear electrooptic coefficient shows no decay at room temperature for over four months, and only a 10% decay after heating to 90/spl deg/C for 1000 h.     

液压转向助力系统能耗特性的分析和比较

 为了提高汽车转向系统的工作效率，利用在典型路面条件下获得的实验统计数据，分析了中位开式和中位闭式两种液压转向助力系统的能量消耗． 经过对4种不同工作原理的转向系统的经济性和环境适应性的评价，指出电动中位闭式系统在节能方面具有明显的优势，但在工程应用中仍有不少技术问题需要进一步解决．     

高可靠镀Ni／Au工艺及其在微波PTFE电路上的应用

介绍了高可靠电镀Ｎｉ／Ａｕ工艺在ＰＴＦＥ微波印制电路上的应用，并分析了氨基磺酸盐镀软镍和亚硫酸盐镀软金工艺的影响因素及提高Ｎｉ／Ａｕ镀层之间附着力的措施。通过实验及应用证明了与直接镀金工艺相比，在软基材ＰＴＦＥ敷铜箔板上镀Ｎｉ／Ａｕ工艺能大大提高微波电路的可焊性，高温稳定性和长期可靠性，并且用其所制作的微波器件的高频性能也优于直接镀金工业。     

基于ATM的网络互连方式

ＡＴＭ技术能否在数据通信网中广泛采用取决于其是否能高效地支持现有业务，其中主要为非连接业务。本文介绍了几种基于ＡＴＭ 的非连接业务支持方式和协议体系结构，对其进行了评述并对ＩＰ分组到ＡＴＭ信元的封装效率进行了分析。     

ATM局域网仿真体系结构的研究

本文在简要叙述了基于ＡＴＭ技术进行局域网仿真的原理后，对局域网仿真体系结构作了一些探讨。考虑的重点是无连接服务和群播功能的实现     

峒室爆破CAD设计方法研究

本文对峒室爆破断面布药计算机辅助设计参数驱动方法进行了探讨围绕断面布药主要参数的变化，提出一种基于参数驱动的计算机辅助设计方法，利用ｗｉｎｄｏｗｓ操作系统下的动态数据交换特性，对断面布药进行布药参数优化，实现了交互调整布药，形成一套断面布的计算机软件，为工程爆破设计实现计算机提供了一种可行的方法。