Diameter of Single-Walled Carbon Nanotubes (SWCNTs) as an Effective Factor in the Detection and Degradation of PCBs

Polychlorinated biphenyls (PCBs) are chlorinated organic compounds and well known carcinogenic and toxic pollutants. Currently, their detection and degradation to products with less risk are among environmental and health priorities. Passing 2,2′,4,4′,5,5′-Hexachlorobiphenyl (PCB-153) through the armchair single-walled carbon nanotubes (SWCNTs) (8, 8) and (10, 10) was investigated by Modified Neglect of Diatomic Overlap in the semi-empirical method. The analysis of results suggests that there are meaningful changes in the middle of the tubes. Based on the obtained evidence, the nanotubes have substantial potential to interact with the PCB-153 molecule effectively. The results show that the increased diameter in the armchair SWCNTs improves the detection and degradation potential of the tube to PCBs. According to the calculated thermodynamic parameters, the diameter of nano-structures is an effective factor in PCBs removal efficiency, as it could be helpful to make a more sensitive PCB nano-sensor.     

Assessing the impact of nanomaterials on anaerobic microbial communities

As the technological benefits of nanotechnology begin to rapidly move from laboratory to large-scale industrial application, release of nanomaterials to the environment is inevitable. Little is known about the fate and effects of nanomaterials in nature. Major environmental receptors of nanomaterials will be soil, sediment, and biosolids from wastewater treatment. Analysis of anaerobic microbial activity and communities provides needed information about the effects of nanoparticles in certain environments. In this study, biosolids from anaerobic wastewater treatment sludge were exposed to fullerene (C60) in order to model an environmentally relevant discharge scenario. Activity was assessed by monitoring production of CO2 and CH4. Changes in community structure were monitored by denaturing gradient gel electrophoresis (DGGE), using primer sets targeting the small subunit rRNA genes of Bacteria, Archaea, and Eukarya. Findings suggest that C60 fullerenes have no significant effect on the anaerobic community over an exposure period of a few months. This conclusion is based on the absence of toxicity indicated by no change in methanogenesis relative to untreated reference samples. DGGE results show no evidence of substantial community shifts due to treatment with C60, in any subset of the microbial community.     

The application of internet of things in healthcare: a systematic literature review and classification

Universal Access in the Information Society - The Internet of Things (IoT) is an ecosystem that integrates physical objects, software and hardware to interact with each other. Aging of population,...     

Combined application of electrolysed water and ultrasound to improve the sanitation of knives in the meat industry

This study investigated the effect of the combination of basic electrolysed water (BEW) and slightly acid electrolysed water (SAEW) with ultrasound (US) for cleaning and sanitation of the knives used in slaughtering processes. The knives were sonicated in a US bath using two modes of operation (normal and sweep) in two steps: (i) 5 min with BEW and (ii) 10 min with SAEW at 35 °C. The microbiological counts and the possible changes in the physical structure of the knives were evaluated. The association BEW + SAEW + US, in the sweep mode, provided lower mesophilic, enterobacterial, Staphylococcus aureus and yeast counts when compared to the values recommended by the international legislation. In addition, these conditions removed all organic residues from the knife blades and promoted the highest migration rate of the residues to the US water bath (12.35 mg/L·min), without modifications in the knife blades. Thus, cleaning and sanitation of knives was feasible with the association of BEW + SAEW + US, which could be a useful alternative for the meat industry.     

Synthesis of Poly (Vinylidene Fluoride)/Modified SBA-15 Nanoparticles Composite Membrane for Water Purification

One of the methods of pollution separating from urban and industrial wastewater is the use of composite membranes based on polymer. The modified composite     

The rural–urban equity nexus of Metro Manila’s water system

ABSTRACT

This article examines equity concerns and inherent conflicts related to rural–urban water supply allocation and use, with focus on Metro Manila. Going beyond the much-discussed difficulty farmers experience from an allocation policy prioritizing urban water requirements, it shows that inequity in raw water allocation is linked to, and further exacerbated by, inequities in urban domestic water provision. Moreover, it highlights the need for broader equity reviews, using the concept of the rural–urban water equity nexus to draw attention to key equity considerations across space and scale that otherwise might remain invisible.     

Simulation of Propane Dehydrogenation to Propylene in a Radial‐Flow Reactor over Pt‐Sn/Al2O3 as the Catalyst

Catalytic paraffin dehydrogenation for manufacturing olefins is considered to be one of the most significant production routes in the petrochemical industries. A reactor kinetic model for the dehydrogenation of propane to propylene in a radial‐flow reactor over Pt‐Sn/Al₂O₃ as the catalyst was investigated here. The model showed that the catalyst activity was highly time dependent. In addition, the component concentrations and the temperature varied along the reactor radius owing to the occurring endothermic reaction. Moreover, a similar trend was noticed for the propane conversion as for the propylene selectivity, with both of them decreasing over the time period studied. Furthermore, a reversal of this trend was also revealed when the feed temperature was enhanced or when argon was added into the feed as an inert gas.     

Effect of Co addition on microstructural and mechanical properties of WC–B4C–SiC composites

In this study, the effect of Co addition on microstructural and mechanical properties of WC-B₄C–SiC composites sintered by spark plasma sintering (SPS) method was investigated. For this purpose, three batches of WC-B₄C–SiC with different contents of Co (10 vol%, 15 vol%, and 20 Vol %) were sintered at 1400 °C. The results of X-ray diffraction (XRD) analysis of the samples indicated the formation of W₂B₅, W₃CoB₃ as well as the remained C phases and unreacted SiC phase. It was observed that by increasing the Co content, the amount of W₂B₅ phase reduces and W₃CoB₃ and C contents increase. Therefore, W₂B₅ peaks were not detected in the sample containing 20vol% Co. Relative density values above 97% were obtained for all the composites. However, a decrease was observed in relative density by increasing the Co content in the composites. The highest flexural strength (510 ± 42 MPa), fracture toughness (10.34 ± 0.82 MPa m^1/2), and hardness (20.63 ± 0.75 GPa) were also obtained for the sample containing 10vol% Co compared to the other samples. In addition, Transgranular fracture of SiC as well as pulling out of W₃CoB₃ and W₂B₅ particles were observed in the fracture surface micrographs of the samples. The presence of micro-cracks in the SiC grains, fracture of W₃CoB₃ grains, and crack deflection was reported as dominant toughening mechanisms.