Cooperative behavior of various agents in dynamic environment

The multi-agent model is a model in which agents with limited ability cooperate each other to accomplish a goal. In this paper, we introduce a multi-agent model in which agents are created to imitate real ants. There are two different type of agents, each type of which has a particular task. We designed agents to communicate each other by using pheromone considering noise. On this model, we observed cooperative behavior of agents and evaluated conditions to make an order of behavior in the model.     

The implementation of time-domain diakoptics in the FDTD method

The time-domain diakoptics is implemented in the finite-difference time-domain (FDTD) method with two types of connecting interfaces: i) directional interface (TLM-type), and ii) total-field interface (FDTD-type). The FDTD-type interface provides a more efficient way to realize time-domain diakoptics than TLM, especially for device optimization problems. To emulate the TLM-type interface in FDTD, two novel algorithms are developed in this paper. One is to implement an ultra-wideband absorbing boundary on the excitation plane during excitation. The other is to separate directional waves without the knowledge of incident waves. For a large circuit with cascaded modules, sequential and parallel algorithms are provided to connect them. With these connecting algorithms, time-domain diakoptics is one candidate method to realize modular and parallel computation in FDTD simulations. The validity of these algorithms is confirmed by comparison with simulated results from Microwave SPICE     

Reliability of Au bump––Cu direct interconnections fabricated by means of surface activated bonding method

As a room temperature bonding method, surface activated bonding (SAB) method has been introduced to be one of the most appropriate interconnection methods for the next generation of electronic packaging. Thus it is important to study the reliability of SAB interconnection in long term life test.In this paper, interconnections of Au bump and Cu film bonded by SAB method were performed in high temperature thermal aging test. Degradation of properties such as electrical resistance, shear strength of bump and interface microstructure during aging process were studied to investigate the failure mechanism of the interconnection. Intermetallic compound Cu₃Au was found formed at the interface during thermal aging, and it causes evolvement of the properties and failure mode of the interconnection changing in shear test. Results reveal that SAB is suitable for the interconnection between Au bump and Cu film and it is reliable in thermal reliability test.     

Pure delay effects on speech quality in telecommunications

The effect of transmission delay on speech quality in telecommunications is described, with human factors such as conversational mode and the talker's knowledge of the cause of delay taken into account. Objective quality estimation methods for delay effects are proposed, and these methods are applied in an actual communications network. In connection with delay perception in a telephone conversation, the assumption was verified that a talker expects a particular response time from a partner, and that delay that is outside this expectation time window is noticed. Taking this information into account, a subjective conversational experiment is controlled by six kinds of tasks by varying the temporal characteristics. Thus, a subjective assessment of delay effects is obtained by laboratory tests in relation to the detectability threshold, opinion rating, and conversational efficiency. Objective quality measures for each test were defined as a linear combination of temporal parameters that correspond closely to subjective qualities     

Integrated-optic dispersion slope equalizer for N/spl times/ several tens of Gb/s WDM transmission

We report a dispersion slope equalizer on a planar lightwave circuit for wavelength division multiplexing (WDM) transmission. This device consists of an array of lattice-formed equalizers with different compensation values fabricated on one wafer and arrayed-waveguide gratings for wavelength multi/demultiplexing. We describe its configuration, operational principle, parameter design, fabrication, and measured characteristics in detail. N/spl times/20 and N/spl times/40 Gb/s slope equalizers were fabricated and their characteristics agreed well with designed values. We also report a reduction in the bias electrical power needed for thermooptic phase shifters in the equalizer array that we realized by employing a phase trimming technique normally used for optical switches.     

Coherence-Based 3-D and Spectral Imaging and Laser-Scanning Microscopy

The basics of three-dimensional (3-D) and spectral imaging techniques that are based on the detection of coherence functions and other related techniques are reviewed. The principle of the 3-D source retrieval is based on understanding the propagation law of optical random field through the free space. The 3-D and spectral information are retrieved from the cross-spectral density function of optical random field or numerical calculation of the inverse propagation of the cross-spectral density. We will first introduce the coherence-based spectral tomography techniques with low-coherence light sources. These techniques limit their scheme of coherence detection only along the optical axis and some of them achieve simultaneously the high resolution and high speed of detection taking advantage of an imaging lens. We then provided explanations of the principle of 3-D source retrieval that is based on the propagation law of optical random field through the free space along with the introduction of the numerical holography and computed tomography techniques. We will lastly show 3-D spectral imaging schemes with the concurrent laser-scanning cross-sectioning techniques: one is the confocal laser scanning microscopy and the other is the two-photon laser-scanning fluorescence microscopy.     

Measurement of aerosol particles by dynamic light scattering-I. effects of non-Gaussian concentration fluctuation in real time photon correlation spectroscopy

Effects of non-Gaussian concentration fluctuations in real time photon correlation spectroscopy were investigated with several sizes of mono-disperse polystyrene latex particles. The non-Gaussian correlation model for a full or a quasi-full (scaled) correlator showed good performance for particle sizing in the case of scaled correlation. The clipped correlation showed an equivalent performance with the scaled correlation except for the case of non-Gaussian fluctuation, where the measured diameter became inaccurate more rapidly with decreasing particle concentration in the scattering volume. The cause of such an instability of PCS in the clipped mode is attributed to baseline fluctuations of the correlogram induced by information loss of the clipped correlator.     

Mortality of chromium plating workers in Japan--a 16-year follow-up study

Opportunistic infections are common and major causes of morbidity in patients with AIDS. Endemic mycoses pose serious risks for patients in certain parts of the world. Histoplasmosis occurs in 2-5% of patients with AIDS in the Ohio and Mississippi River valleys of the United States and in over 25% of patients from a few cities. Antigen testing has become a highly useful method for diagnosing histoplasmosis rapidly, evaluating the response to treatment and diagnosing relapse. Treatment with amphotericin B or itraconazole is effective (90% or higher) if the patient is not seriously ill at the time of diagnosis but the mortality approaches 50% for those with multiorgan failure. Itraconazole blood levels should be monitored and drugs that impair the absorption or accelerate the metabolism of itraconazole should be avoided. Prophylaxis with itraconazole may be appropriate in areas with an incidence of histoplasmosis. A recently completed study in cities which have unusually high rates of histoplasmosis will provide greater insight into the role of prophylactic antifungal therapy.