Development of in-process visualization system for laser-assisted three-dimensional microfabrication using photocatalyst nanoparticles

Recently, microfabrication technology has been used to develop micro-electro-mechanical systems (MEMSs), micro-total analysis systems (μ-TASs), and photonic crystals. Various microfabrication techniques have been proposed; however, a technique that can be used to efficiently fabricate 3-D structures via a simple procedure has not been reported thus far. Because 3-D metal structures have not only mechanical functions but also electromagnetic functions, it is desirable to develop such a technique. Our research group is in the process of developing a new technique for 3-D microfabrication that involves the use of a lower power continuous wave laser. Our technique is characterized by the reduction of silver ions via the photocatalysis of titanium dioxide (TiO2) excited at the laser beam waist. For the analysis and development of our microfabrication technique, we developed a microscope system that enabled us to observe the microfabrication process along the fabrication beam optical axis and its radial direction. We successfully visualized the microfabrication process in 3-D. The visualization showed that when the beam waist was swept, the silver structure grew in 3-D following its path. The effect of the substrate on the deposition condition was examined.     

Modeling the trajectory of window flames with regard to flow attachment to the adjacent wall

A model for predicting the trajectory of window flame ejected from a fire compartment was formulated incorporating the effect of wall above the opening. Based on the observation in the reduced scale experiments, window flames were divided into the following categories with regard to its trajectory configuration: the flow which ascends almost vertically up after ejection maintaining a certain separation from the wall; and the flow which ascends upward after ejection and gradually approaches to the wall in the downstream. In the model, trajectories of these flows were approximated by cubic polynomials whose coefficients were given as functions of a dimensionless parameter F*. The parameter F* was derived from the conservation equation of momentum which incorporates the effect of pressure gradient across the ascending flows. Critical condition for the occurrence of flow attachment was described as a proportion of the maximum separation from the wall versus the opening width. Trajectories predicted by the proposed model were then compared with the measurement data which indicated reasonable agreements.     

Modeling thermal behaviors of window flame ejected from a fire compartment

A series of reduced-scale experiments were carried out in order to investigate thermal behaviors of window flame, which exposes the upper floors as well as the adjacent buildings to potential risks of fire spread. A stainless pan filled with alcohol was used as the fire source and was placed inside a cubic compartment of 900 mm side. Temperatures and velocities at various points inside and outside of the compartment were measured. The compartment was pressurized during the experiment by mechanically supplying air at several mass inflow rates through an inlet duct set at the bottom part of the compartment. This was for simulating fire conditions under the effect of external wind pressure. On the basis of the experimental observation, line (i.e., two-dimensional) heat source assumption was adopted for developing a model of window flame behavior. A dimensionless parameter Q^′*${Q^{\prime }}^{*}$ was derived from the governing differential equations in order to generalize the measurement results. Expressions for temperature rise along the trajectory ΔT_m and characteristic flame width b_T were developed incorporating the parameter Q^′*${Q^{\prime }}^{*}$.     

Dimethylamine-modified waste paper for the recovery of precious metals

Waste newsprint paper was modified with dimethylamine (DMA) to obtain a tertiary amine type adsorption gel called DMA-paper gel. This new derivative was investigated for adsorption, from hydrochloric acid medium, of gold, palladium, and platinum as well as some base metals. The gel exhibited selectivity only for precious metals with a remarkably high capacity for Au(III), i.e., 4.6 mol/kg dry gel and comparable capacities, i.e., 2.1 and 0.9 mol/kg for Pd(II) and Pt(IV), respectively. Also, Au(III) was reduced to the elemental form during adsorption. Furthermore, column adsorption and subsequent elution of the adsorbed metal ions by acidic thiourea revealed encouraging recoveries (approximately 90%), thus enhancing the scope of the gel for effective preconcentration, separation, and recovery of precious metals. The effectiveness of recovery of precious metals from real industrial liquor was also tested, and it showed highly encouraging results with respect to the stability of the gel in the harsh medium, and selectivity for the targeted metal ions in the presence of excess of other metal ions.     

Investigation of ochratoxin a, B and citrinin contamination in various commercial foods

Ochratoxin A (OTA), ochratoxin B (OTB) and citrinin (CIT) in commercial foods were simultaneously determined and confirmed with high-performance liquid chromatography (HPLC) and liquid chromatography coupled with tandem mass spectrometry (LC/MS/MS). The samples examined were made up of cereal, fruit, coffee, and cacao products. The limits of quantification (S/N> or =10) of OTA, OTB and CIT were 0.1 microg/kg or less. Aflatoxins (AF), deoxynivalenol (DON) and fumonisins were also surveyed. Of 157 samples examined, 44 were contaminated with OTA at levels of 0.11 to 4.0 microg/kg. At least 2 positive samples were labeled as domestics. In most positive samples, the OTA level was low, less than 1 microg/kg. The highest incidence of OTA was observed in cacao powder (10/12), followed by instant coffee (5/7), cocoa (5/8) and raisin (6/13). OTB was found in fruit and cacao products containing relatively high levels of OTA. Co-occurrence of OTA, CIT and DON was found in cereal products, and co-occurrence of OTA and AF was found in cacao products. Approximately 30% of naturally contaminated OTA in roasted coffee bean moved into the extract solution when brewed with paper filter.     

Simultaneous determination of ochratoxin A, B and citrinin in foods by HPLC-FL and LC/MS/MS

Methods using high-performance liquid chromatography with fluorescence detection (HPLC-FL) and using liquid chromatography with tandem mass spectrometry (LC/MS/MS) were developed for simultaneous determination of ochratoxin A (OTA), ochratoxin B (OTB) and citrinin (CIT) in cereal, fruit, and coffee products. The samples were extracted with ethyl acetate under an acidic condition, and then cleaned up with liquid-liquid separation. The test solutions were analyzed by reverse-phase HPLC-FL and LC/MS/MS. Mass spectral acquisition was performed in positive ion mode by applying multiple reaction monitoring. The performances of both detectors were almost equivalent. The recoveries of OTA and OTB were 87-111%, and that of CIT were 70-88%. The limits of quantification (S/N> or =10) of OTA, OTB and CIT was 0.1 mug/kg or less. These methods were considered to be useful for the determination of the three mycotoxins at low levels (0.1 microg/kg).     

Verification of Iron Loss Calculation Method Using a High‐Precision Iron Loss Analyzer

Because of the improved performance of power devices, the volume of the ac filter inductors used in high‐frequency PWM inverters has been reduced. However, the temperature rise in the filter inductor due to this miniaturization has become more pronounced. Therefore, we have proposed an iron loss calculation method for the ac filter inductor. However, the accuracy of the value calculated via the loss map method cannot be verified, because the iron loss arising during each switching period cannot be measured with conventional power measuring instruments. In order to resolve this problem, we developed an inductor loss analyzer (ILA), which allows precise measurement of the iron loss in the inductor during each switching period. The accuracy of the calculation of iron loss in the filter inductor by the loss map method was verified with the ILA. We found that the value calculated by the loss map method differed slightly from the value measured with the ILA. However, these differences can be reduced if we take into account the accurate flux density calculation and the effect of the duty ratio of PWM pulses on the loss. Finally, we verified that the loss map method can provide accurate iron loss calculations.     

Developing a system to cover OTHER via rudimentary objective–subjective distinction

In this paper, we propose that the human brain develops a system to cover OTHER. This capital “OTHER” represents the transcendental other in infancy and the latent other later in life. The system grows to cover the transcendental other through the developmental process of objective–subjective distinction, and thereafter the latent other is found as a duality of the system later in life. To argue the emergence of such system regarding social conceptualization, we introduce experiments in which we verify that preschoolers abstract, categorize, and evaluate social relationships. The results show that children around 6 years old exhibit early social conceptualization and rudimentary objective–subjective distinction. Moreover, we claim that early social conceptualization is acquired through developing the heterarchical system when the experiments are regarded as communication between the participant and experimenter. Human beings may regard this heterarchical system as the self.     

Direct and Indirect Exciton Dynamics in Few‐Layered ReS2 Revealed by Photoluminescence and Pump‐Probe Spectroscopy

Atomically thin‐layered ReS₂ with a distorted 1T structure has attracted attention because of its intriguing optical and electronic properties. Here, the direct and indirect exciton dynamics of a three‐layered ReS₂ is investigated by polarization‐resolved transient photoluminescence (PL) and ultrafast pump‐probe spectroscopy. The various time scales of the decay signals of the time‐resolved PL (<10 ps), with monitoring of the populations of electron–hole pairs (exciton), and the transient differential reflectance (≈1 and 100 ps), with monitoring of the populations of electrons and/or holes in the excited states, are observed. These results reveal the characteristic exciton dynamics: rapid relaxation of direct excitons (electron–hole pairs) and slow relaxation of the momentum‐mismatched indirect excitons accompanied by a one‐phonon emission process. These findings provide important information regarding the indirect bandgap nature of few‐layered ReS₂ and its characteristic exciton dynamics, boosting the understanding of the novel electronic and optical properties of atomically thin‐layered ReS₂.