High-performance liquid chromatography of human milk triacylglycerols and gas chromatography of component fatty acids

Human milk triacylglycerols were separated by high-performance liquid chromatography. A 5-μ Supelcosil LC-18 column (Supelco, Inc., Bellefonte, PA) was used with acetone/acetonitrile (64∶36, vol/vol) as mobile phase. Triacylglycerols were tentatively identified based on theoretical carbon number and relative retention time. Despite changes resulting from dietary fat variation, the major component triacylglycerols were those composed of palmitic, oleic and linoleic acids. Triacylglycerols with palmitic, stearic and oleic acids were present as minor components. Fatty acids were quantified by gas chromatography relative to an internal standard. Ratios of n−6/n−3 fatty acids were found to be high than previously reported. Based on a paper presented at the Symposium on Milk Lipids held at the AOCS Annual Meeting, Baltimore, MD, April 1990.     

Hemispheric contributions to nonverbal abstract reasoning and problem solving.

Hemispheric involvement in reasoning abilities has been debated for some time, and it remains unclear whether the right hemisphere's involvement in problem solving is modality specific or dependent on the type of spatial reasoning required. In the current study, 2 types of nonverbal reasoning abilities were examined, spatial reasoning and proportional reasoning, in 109 patients with cerebrovascular disease that was confined to either the right or the left hemisphere or was diffuse in nature. Results indicated that no lateralizing effects were present based on type of spatial reasoning. Findings are consistent with the suggestion that higher order cognitive processes involved in nonverbal abstraction and problem solving are not strongly lateralized to the right hemisphere but rather are more generally distributed throughout the cortex. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Experimental realization of a new transistor

The authors report on the fabrication and characteristics of a unipolar, three-terminal, resonant-tunneling transistor. The operating principle of this new transistor is based on the fact that the quantum mechanical resonant-tunneling probability of hot electrons between the emitter and the collector is switched almost completely on and off, when either the base or the collector bias is swept. The emitter injects hot electrons to the second lowest subband of a thin (100 Å in this work) GaAs quantum well. Subsequently, the hot electrons will either resonantly tunnel to the collector, or relax to the lowest subband and contribute to the base current. As a result of resonant transmission, at 77 K the current-voltage characteristics of the transistor display negative differential resistance with extremely large (4691) peak-to-valley ratio. Furthermore, when biased near resonance, a maximum DC current gain of ~1.2 and a maximum AC current gain of ~11.9 were observed. The first use of a new `tunneling-in and tunneling-out' scheme in contacting a thin quantum well is also demonstrated     

Geometric model for nuclear absorption from microscopic theory

A parameter-free geometric model for nuclear absorption is derived from microscopic theory. The expression for the absorption cross section in the eikonal approximation taken in integral form is separated into a geometric contribution, described by an energy-dependent effective radius, and two surface terms which are shown to cancel in an asymptotic series expansion. For collisions of light nuclei, an expression for the effective radius is derived using harmonic-oscillator nuclear density functions. A direct extension to heavy nuclei with Woods-Saxon densities is made by identifying the equivalent half density radius for the harmonic-oscillator functions. Coulomb corrections are incorporated and a simplified geometric form of the Bradt-Peters type obtained. Results spanning the energy range of 1 MeV/nucleon to 1 GeV/nucleon are presented. Good agreement with experimental results are obtained.     

Phase equilibria in InAsSbP quaternary alloys grown by liquid phase epitaxy

The quaternary alloy InAs_1−x−ySb_xP_y, lattice-matched to InAs, is a promising material for the production of infrared light sources for the detection of gases in the 2–4 μm region of the spectrum. In this work, thermodynamic phase equilibrium calculations have been carried out to determine the compositions required for liquid phase epitaxial growth and the extent of the miscibility gap in the solid material. For high band gap materials, the desired growth temperature is found to be intermediate between a low temperature required to grow P-rich solids and higher temperatures required to avoidspinodal decomposition. Conventional LPE growth at an intermediate temperature of 583°C is found to produce good material with high luminescence efficiency and excellent optical characteristics. Problems with phosphorus loss from the melt are also discussed and lower growth temperatures are found to considerably reduce this problem. Growth in the metastable region between the binodal and spinodal lines has been achieved with the production of phosphorus-rich solids with concentrations up to y = 0.445.     

A comparison of various measured and calculated shieldingeffectiveness data for a wire cage

Considers the shielding effectiveness (SE) of a wire cage structure (2 m cube). The SE is predicted using various analytical approximations and measured using a number of different methods. Both near-field and far-field coupling through the mesh are considered. The results show that calculated and measured SE data can cover a large range of values depending on the configuration used. Upper and lower SE bounds for the near and far-field cases are discussed     

Effect of ion energy on hydrogen diffusion in n- and p-GaAs

The ion energy during electron cyclotron resonance (ECR) plasma hydrogenation is found to have a strong effect on both the effective diffusivity and solubility of hydrogen in n⁺ and p⁺ GaAs. For fixed plasma exposure conditions (30 min, 250°C) the diffusion depths for -150 V acceleration voltage are ~50 and ~100% larger, respectively, in p⁺- and n⁺-GaAs compared to 0 V acceleration voltage. The smaller incorporation depths at lower ion energy coincide with much larger peak hydrogen concentrations and higher apparent thermal stability of passivated dopants     

Prediction of fatigue screw loosening in anterior spinal fixation using dual energy x-ray absorptiometry

STUDY DESIGN: A biomechanical study was performed to investigate a relation between the bone mineral density of the vertebral body and the number of loading cycles to induce fatigue loosening of an anterior vertebral screw. OBJECTIVES: The objective of this study was to investigate the potential usefulness of dual energy x-ray absorptiometry of measuring bone mineral density of the vertebral body in predicting the fatigue loosening of th anterior vertebral screw. SUMMARY OF BACKGROUND DATA: Loosening of the vertebral body screw is a well know failure in spinal instrumentation, and more commonly observed than pullout failure. The relation between bone mineral density and pullout strength of the screw has been investigated previously, but no studies are available on the fatigue loosening in anterior spinal fixation. METHODS: Bone mineral density was measured using dual energy x-ray absorptiometry and the screw loosening was produce by a cyclic loading in the cephalad-caudal direction. Screw loosening was defined as 1 mm displacement of the screw relative to bone, and the number of loading cycles to induce the screw loosening was obtained and statistically correlated with bone mineral density. RESULTS: There was a positive correlation between the number of loading cycles to induce screw loosening and bone mineral density (R = 0.8, P < 0.01). The average number of loading cycles to induce screw loosening was significantly less for specimens with bone mineral density < 0.45 g/cm2 compared to those with bone mineral density > or = g/cm2. CONCLUSIONS: These findings suggest that bone mineral density may be a good predictor of anterior vertebral screw loosening. Bone mineral density < 0.45 g/cm2 may be critical value of loosening of the anterior vertebral body screw. However, further biomechanical and clinical studies are required before using threshold value clinically.     

Role of child and maternal processes in the psychological adjustment of children with sickle cell disease.

In this study, 64% of children aged 7–12 yrs with sickle cell disease were found to have a parent-reported behavior problem, and 50% met the criteria for a Diagnostic and Statistical Manual of Mental Disorders-III-Revised (DSM-III-R) diagnosis based on a structured clinical interview of the child. Internalizing types of behavior problems and diagnoses were the most frequent. Support was provided for a transactional stress and coping model in delineating the processes associated with child adjustment. In particular, maternal anxiety accounted for 16–33% of the variance in mother-reported internalizing and externalizing behavior problems, respectively, and child pain-coping strategies accounted for 21% of the variance in child-reported adjustment problems. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Optimisation of enhancement layer DCT coefficients in MPEG-2 SNRscalable video

The authors describe an optimisation algorithm which can be applied to two-layer SNR scalable MPEG-2 video coding, such that bandwidth efficiency is achieved which is comparable to single-layer coding. Our optimised two-layer coder is shown to generate as little as 1% fewer bits than a single-layer coder compared to up to 15% more bits generated by the non-optimised SNR scalable coder