齐大山铁矿南帮含水构造带探测研究

为解决采空区突发涌水给矿山安全生产带来的安全威胁,以齐大山铁矿为研究对象,以高密度电阻率法含水构造带理论模型的正演模拟研究为基础,运用高密度电阻率法对采场南帮含水构造带的异常范围进行了圈定;运用瞬变电磁法进行了二次探测,并对高密度电阻率法所圈定的异常范围进行了验证。研究表明:含水构造带显示为低阻异常特征,在高密度电阻率法探测成果图中显示的两处低阻异常与含水构造带理论模型的正演模拟结果一致;同时,在瞬变电磁法探测成果图中显示的低阻区域均在高密度电阻率法所圈定的低阻异常范围内,二者相互验证,这两处低阻异常均为含水构造带的地球物理异常特征的显示,表明采用高密度电阻率法和瞬变电磁法组合识别技术可实现对隐伏含水构造带的先导性探测。     

湾图沟煤矿高强度采动巷道稳定性评价研究

针对高强度采动巷道围岩控制难题，从实验室岩样尺度和现场巷道尺度研究了湾图沟煤矿13405工作面回风平巷围岩稳定性特征。结合单轴压缩试验和声波测试分析了干燥、自然及饱和状态下3组岩样的力学行为差异特征。利用钻孔成像，分析了高强度采动影响巷道围岩裂隙发育分段特征。结果表明:干燥、自然及饱和状态下岩样的单轴抗压强度和弹性模量依次降低，水分的存在极大地降低了岩石的强度和刚度。实煤体段围岩仅在深度1 m范围内发现少量纵向裂隙。高静压段两帮维护效果较差，煤帮裂隙极为发育，存在高量值的离层。动压段巷道顶板完整性较好，两帮均发现较大离层，且超出了锚杆正常锚固范围，严重影响了巷道锚固结构的稳定性。     

Tuning effect of silicon substitution on magnetic and high frequency electromagnetic properties of R2Fe17 and their composites

In this work, we report the tuning effect of the Si substitution on the magnetic and high frequency electromagnetic properties of R₂Fe₁₇ compounds and their paraffin composites. It is found that the introduction of Si can remarkably improve the magnetic and electromagnetic properties of the R₂Fe₁₇ compounds, making the R₂Fe_17–xSi_x-paraffin composites excellent microwave absorption materials (MAMs). By introducing the Si element, their saturation magnetizations decrease slightly, while much higher Curie temperatures are obtained. Furthermore, better impedance match is reached due to the decrease of the high-frequency permittivity ε′ by about 40%–50%, which finally enhances the performance of the microwave absorption. The peak frequency (f_RL) of the reflection loss (RL) curve moves toward high frequency domain and the qualified bandwidth (QB, RL ≤ ?10 dB) increases remarkably. The maximum QB of 3.3 GHz (12.0–15.3 GHz) is obtained for the Sm_1.5Y_0.5Fe₁₅Si₂-paraffin composite (d = 1.0 mm) and the maximum RL of ?53.6 dB is achieved for Nd₂Fe₁₅Si₂-paraffin composite (d = 2.2 mm), both surpassing most of the reported MAMs. Additionally, a distinguished dielectric microwave absorption peak is observed, which further increases the QB in these composites.     

Corrosion resistance of Al–Cr-slag containing chromium–corundum refractories to slags with different basicity

Al–Cr slag is the solid waste generated by the smelting of Cr metal. It presents a range of environmental hazards. This study addressed the corrosion resistance of Al–Cr slag containing chromium–corundum refractories to slags with different basicity. Herein, we provide suggestions for the use of Cr–corundum of different basicity in kilns. Al–Cr slag, brown fused Al₂O₃, and chrome green were used as the raw materials, with pure calcium aluminate cement being used as a binder. The brick samples, prepared using different blends of chrome green and corundum, were fired at 1600?°C, and subsequently subjected to a slag corrosion test. After corrosion by slag of different basicity, the phase composition and microstructure of the sample were analyzed by X-ray diffraction, energy dispersive spectrometer and scanning electron microscopy. There were two major findings. First, Cr–corundum brick made from Al–Cr slag has a better slag corrosion resistance than that made from Cr₂O₃ and brown fused Al₂O₃. Second, Cr–corundum brick made from Al–Cr slag has superior corrosion resistance to slag with a CaO:SiO₂ ratio of 2:1.     

基于振动实测的非均质地层钻头失效分析与对策

四川盆地作为国内页岩气开发的重点区域,通过近几年的不断攻关和实践,机械钻速得到了提高,但由于受地层复杂、可钻性差、非均质性强等地质因素的影响,导致井下钻柱系统不良振动剧烈,容易出现钻头损坏严重、钻速较低等问题,严重影响了钻井时效。为了解决上述难题,以该盆地涪陵工区上二叠统龙潭组—中二叠统茅口组为例,采用井下振动高频测量工具的实测手段,测量了钻头—钻柱系统的动态振动加速度参数,结合地层的岩性和矿物组分分析,研究钻头失效原因与对策,并开展了现场试验。研究结果表明:①在非均质地层中钻进的钻头—钻柱系统产生了大于40 m/s~2的高幅值瞬时冲击振动,高幅值的瞬时冲击是导致钻头先期失效的主要原因;②提出了抑制高幅值的瞬时冲击振动采用"减振+增压"工具组合和避免井下工具共振的钻井参数;③采用钻井新参数的试验井比邻井的高幅值瞬时振动降低了17%,单只钻头进尺增加24%,钻头工作环境得到了较大的改善,钻头使用数量减少。结论认为,该研究成果能够有效地改善钻头—钻柱系统的振动状态,有利于达成延长钻头使用寿命的目标。     

In situ polymerization of flame retardant modification polyamide 6,6 with 2-carboxy ethyl (phenyl) phosphinic acid

A novel halogen-free flame retardant copolyamide 6,6 (FR-PA66) was prepared successfully by in situ polymerizing with adipic acid hexamethylene salt and 2-carboxy ethyl (phenyl) phosphinic acid (CEPPA). The elemental composition and chemical structure of FR-PA66 were characterized by energy dispersive X-ray spectroscopy, Fourier transform infrared spectrometer and ¹³C Nuclear magnetic resonance spectrometer. The flame retardancy, thermal stability, and morphology of char residues were also investigated by the limiting oxygen index (LOI), UL 94 test, thermogravimetric analysis, and scanning electron microscopy. The results showed that FR-PA66 samples had much better flame retardancy and char formation ability than pure PA66 after the flame retardant modification. The LOI values were increased from 24.0 to 28.0% by adding 6 wt % of CEPPA and all FR-PA66 samples were rated as V-0 rating in UL-94 test. Furthermore, the thermal stability analysis indicated that in situ polymerization with CEPPA effectively decreased the initial decomposition temperature and increased the amount of char residue. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 137, 48687.     

某高校既有建筑室内人员相关VOCs目标污染物的实测分析

为研究高校既有建筑室内人群散发对室内VOCs的影响，对高校不同人群样本的教室及会议室两类典型人群密集房间，共82个人群样本对象进行了VOCs采样分析，得到不同实际场景下的人员相关的VOCs浓度水平，并对其潜在的影响因素进行分析。结果表明，共确认了29种与室内人员相关的高检出率且较高浓度值的物质，包括芳香族化合物9种，烷烯烃类9种，酮类和醛类8种，醇酯类以及卤化物3种，并得到主要VOCs物质的浓度水平和I/O比。对影响因素的统计分析表明，室内人员密度、季节和房间类型对不同VOCs物质存在显著性影响，其中季节性因素对目标VOCs污染物影响最为广泛，其次是房间类型与室内人员密度。该研究可为进一步了解人员密集室内VOCs污染现状及控制策略提供一定的科学参考。     

0.88C-1.2Si-0.75Mn-2Al高强度电缆铠装钢用盘条的试制

采用中高碳成分添加低密度元素Si、Al进行轻量化的设计思路设计了试验钢的化学成分,试验钢采用50 kg真空感应炉冶炼。利用金相显微镜、SEM扫描电镜和力学性能检测设备对试制后的Φ6 mm盘条进行了显微组织观察、珠光体片层间距的测量和屈服强度、抗拉强度、延伸率的检验。结果表明:盘条在600℃等温2 h后的金相显微组织为铁素体+珠光体的混合组织,珠光体的片层间距为(126±5) nm,屈服强度大于1 183 MPa、抗拉强度大于1 425 MPa、延伸率大于10%,其力学性能满足电缆用铠装钢的技术要求。     

微裂隙中水泥浆液渗滤效应的可视化试验研究

在微裂隙岩体注浆过程中,水泥浆液的渗滤效应对注浆效果的影响显著。自主研制了一套微裂隙注浆可视化试验系统,该系统由注浆系统、微裂隙模型以及监测系统3个部分组成,监测系统又分为显微监测系统和压力流量监测系统。当水泥浆液进入微裂隙模型后,利用显微监测系统对裂隙入口处的渗滤效应进行实时观测。利用压力流量监测系统对注浆试验过程中的注浆压力以及累计流量进行自动记录。运用自主设计的微裂隙注浆可视化试验系统,对微裂隙中的水泥浆液渗滤过程进行试验研究。采用3种水泥浆材(超细水泥Ⅰ、超细水泥Ⅱ和普通水泥),研究在注浆压力2.0 MPa、水灰比1.0的条件下,不同水泥颗粒粒径大小在不同裂隙开度下的浆液渗滤效应。通过试验发现,当裂隙开度较小时,在裂隙入口处形成了完整的半圆拱形滤饼;随着裂隙开度的增加,在裂隙入口处形成断续分布状滤饼;当裂隙开度增加到无渗滤发生时,裂隙入口处仅残留少量水泥颗粒附着物。通过试验获得了3种水泥的最小可注入裂隙开度大小b min和最小无渗滤裂隙开度大小b crit:超细水泥Ⅰ的b min和b crit分别为80和280μm;超细水泥Ⅱ的b min和b crit分别为100和300μm;普通水泥的b min和b crit分别为140和310μm。研究结果发现水泥粒径的减小对最小可注入裂隙开度大小的影响较大,但对最小无渗滤裂隙开度大小的影响较小。结合渗滤趋势k值,发现随着水泥粒径的减小,相应的k min和k crit值会随之增加,水泥浆液更容易在裂隙入口处发生渗滤,这是因为超细水泥比表面积更大,水泥颗粒间易发生团聚。     

含磷固化剂及固化环氧树脂的合成及表征

以4,4′-二氨基二苯基甲烷(DDM)、苯甲醛和亚磷酸二乙酯为原料,合成了两种含磷固化剂PM1和PM2,用红外光谱、核磁共振氢谱对PM1和PM2的结构进行了表征。用DDM,PM1,PM2分别固化双酚A型(DGEBA)环氧树脂,得到DGEBA-DDM,DGEBA-PM1,DGEBA-PM2树脂,采用示差扫描量热法、热重分析(TGA)和极限氧指数(LO I)对DGEBA-DDM,DGEBA-PM1,DGEBA-PM2树脂的玻璃化转变温度(Tg)、反应活性、热稳定性和阻燃性能进行了表征。实验结果表明,PM2的反应活性比PM1低;DGEBA-DDM,DGEBA-PM1,DGEBA-PM2树脂的Tg分别为178,112,145℃;TGA结果表明,700℃时DGEBA-PM1和DGEBA-PM2树脂的成炭率分别为29%和35%,而700℃时DGEBA-DDM树脂的成炭率只有19%;DGEBA-PM1和DGEBA-PM2树脂的LO I值由DGEBA-DDM树脂的24%分别增至30%和35%,且阻燃性能大幅度提高。