Modeling of the copolymerization,with depropagation,of α‐methyl styrene and methyl methacrylate at an elevated temperature

We propose a dynamic model for the copolymerization of α‐methyl styrene (α‐MS) and methyl methacrylate (MMA) in a batch reactor. The parameters are based on data from the literature and our own laboratories over the full conversion range. A two‐parameter model with constant reactivity ratios shows the most reasonable results. The dynamic model depicts the reaction kinetics and reactor behavior more clearly. Termination occurs mainly by the cross reaction of unlike radicals, and its rate increases with the molar ratio of α‐MS to MMA. The model enables us to predict the instantaneous and cumulative properties of the copolymer and also provides us with a basic tool for the optimization and control of industrial reactors. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 261–270, 2004     

Rotational diffusion coefficient of rod-like polymer with a slight flexibility in semidilute and concentrated solutions

Summary A confined stiff chain model is suggested for the prediction of the rotational diffusion coefficient of a rigid rodlike polymer with a slight flexibility above the region of dilute solution (c1/L³). It shows a fairly good agreement with the experimental data of various polymers. Among them, PBLG and PBT with more rigidity are more consistent with the model when the log-jamming effect is considered. The predicted rotational diffusivity shows approximately the inverse seventh-power of length, which is less than 9 of Doi-Edwards tube model, but larger than the experimental value 5.7 of M-virus, while it shows the inverse power of concentration is a little larger than the value 2 of tube model except for the rodlike virus M-13.     

Comparison of Two Preparation Methods in the Redox Properties of Pd/CeO<Subscript>2</Subscript>/Ta/Si Model Catalysts: Spin Coating Versus Sputter Deposition

Pd/CeO₂/Ta/Si model catalysts were prepared by spin coating and sputter deposition method, and characterized by means of AFM, SEM and in situ XPS, especially focusing on the redox properties of Ce and Pd elements. Compared with thin CeO₂ films (about 2.2nm), the thicker ones (about 22nm) maintained Ce⁴⁺ oxidation state even after treatment with H₂ up to 500°C while the presence of Pd facilitated the reduction of ceria. The reduction of ceria brought about following that of PdO, which was explained by the spillover of hydride in Pd to CeO₂ originating from hydrogen adsorption on the Pd surface. Compared with the sputter deposition method, spin coating produced the smaller size of Pd particles, thus leading to formation of the stable PdO species against hydrogen. Based on these results, a schematic model of Pd/CeO₂/Ta/Si was suggested and it might be assumed that spin coating method provided with an environment similar to the conventional impregnation.     

氟橡胶与金属黏接的研究进展

介绍了氟橡胶与金属的黏接机理,综述了氟橡胶与金属黏接用硅烷偶联剂、有机硅胶黏剂和含增黏组分胶浆的研究进展状况,指出简便实用、效果良好的黏接工艺是今后的发展方向。     

Preparation and characterization of polypropylene/layered silicate nanocomposites using an antioxidant

Polypropylene (PP)/layered silicate nanocomposites were prepared via simple melt mixing of three components, PP, layered silicates modified with octadecylamine (C18-MMT) and antioxidant, to investigate the role of antioxidant. TEM and X-ray scattering results confirmed the intercalated state of silicates in PP/layered silicate nanocomposites with antioxidant. In rheological and mechanical study, the nanocomposites with antioxidant showed higher properties than those of the unfilled PP. The nanocomposite with 5 wt% C18-MMT and 0.5 phr antioxidant exhibited about 1.4 times higher tensile modulus and 1.3 times higher storage modulus than the unfilled PP. However, PP/C18-MMT without antioxidant showed lower rheological values owing to the thermal decomposition of PP and the poor compatibility between PP and C18-MMT. It could be concluded that antioxidants played an important role in enhancing the compatibility between PP and C18-MMT. According to the real time X-ray diffraction, the nanocomposite showed the weak ordering of PP crystals than the unfilled PP in the load-extension plateau region of elongation.     

Activities of MFI-Supported Rhenium Catalysts for the Aromatization of Methane: Effect of Cationic Form of the Inorganic Carrier

MFI type inorganic carrier was used in two different cationic forms, hydrogen and calcium respectively. MFI-supported molybdenum and rhenium catalysts were prepared. The activities of the catalysts were compared for the aromatization reaction of methane. Higher activity values were attained with the catalysts supported on HZSM-5. Aromatics were also observed with the catalysts supported on CaZSM-5, despite their deficiency in acid sites. Highly dispersed rhenium is expected to be formed with the use of the inorganic carrier in calcium form. On the other hand, lower reaction rates were observed with rhenium supported on CaZSM-5, in spite of the improved dispersion of the active rhenium species on this catalyst. This was interpreted in terms of the critical role of the acid sites in the conversion of methane to aromatics, compared to the improved dispersion of the active metal.     

The elusive role of the N-terminal extension of {beta}A3- and {beta}Al-crystallin

ß-Crystallins are structural lens proteins with aconserved two-domain structure and variable N- and C-terminalextensions. These extensions are assumed to be involved in quaternaryinteractions within the ß-crystallin oligomers orwith other lens proteins. Therefore, the production of ßA3-and ßAl-crystallin from the single ßA3/A1mRNA by dual translation initiation is of interest. These crystallinsare identical, except that ßAl has a much shorterN-terminal extension than ßA3. This rare mechanismhas been conserved for over 250 million years during the evolutionof the ßA3/A1 gene, suggesting that the generationof different N-terminal extensions confers a selective advantage.We therefore compared the stability and association behaviourof recombinant ßA3- and ßAl-crystallin.Both proteins are equally stable in urea- and pH-induced denaturationexperiments. Gel filtration and analytical ultracentrifugationestablished that ßA3 and ßA1 both form homodimers.In the water-soluble proteins of bovine lens, ßA3and ßA1 are present in the same molecular weight fractions,indicating that they oligomerize equally with other ß-crystallins.¹H-NMR spectroscopy showed that residues Met1 to Asn22 of theN-terminal extension of ßA3 have great flexibilityand are solvent exposed, excluding them from protein interactionsin the homodimer. These results indicate that the differentN-terminal extensions of ßA3 and ßA1 donot affect their homo- or heteromeric interactions.     

Removal of formaldehyde at low concentration using various activated carbon fibers

Adsorption of low concentration formaldehyde on pitch‐based, rayon‐based, and PAN‐based activated carbon fibers (ACFs) and an unactivated PAN‐based carbon fiber (PAN‐CF) was investigated by a dynamic method. The pore structure and surface chemistry of these samples were characterized by liquid nitrogen adsorption, elemental analysis, and X‐ray photoelectron spectroscopy. Results revealed that the pore structure, especially surface chemical composition, greatly influence the formaldehyde adsorption. PAN‐based ACFs showed the highest formaldehyde adsorption capacity because there are more abundant nitrogen‐containing groups, especially pyrrolic, pyridonic, pyridinic, and quaternary on the surface. The breakthrough time and formaldehyde adsorption capacity of one kind of PAN‐ACF were 361 min and 0.478 mmol/g, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Scalable Realistic Rendering with Many‐Light Methods

Recent years have seen increasing attention and significant progress in many‐light rendering, a class of methods for efficient computation of global illumination. The many‐light formulation offers a unified mathematical framework for the problem reducing the full lighting transport simulation to the calculation of the direct illumination from many virtual light sources. These methods are unrivaled in their scalability: they are able to produce plausible images in a fraction of a second but also converge to the full solution over time. In this state‐of‐the‐art report, we give an easy‐to‐follow, introductory tutorial of the many‐light theory; provide a comprehensive, unified survey of the topic with a comparison of the main algorithms; discuss limitations regarding materials and light transport phenomena and present a vision to motivate and guide future research. We will cover both the fundamental concepts as well as improvements, extensions and applications of many‐light rendering.     

Preparation of microporous chlorinated poly(vinyl chloride) membrane in fabric and the characterization of their pore sizes and pore‐size distributions

Chlorinated poly(vinyl chloride) (CPVC)/poly(vinyl pyrrolidone) (PVP) membranes were prepared by using the solvent system tetrahydrofuran (THF)/n‐butyl alcohol (n‐BA) to investigate the possibility of pore size and pore‐size distribution control. The coagulation of CPVC/PVP solution was induced by the exposure to water vapor at 25 (±0.5)°C. The average pore diameter, d_p, and the size distribution of pores on the surface of the membrane were quantified through the image analyzer from the images visualized by field emission scanning electron microscope (FE‐SEM). Surface pore size and distribution of the prepared CPVC/PVP membrane were strongly affected by the relative humidity (RH) in the environment and the content of PVP used as an additive. Particularly, in the case of CPVC membrane without PVP, the mean pore size was 0.15–0.2 μm, depending on the RH. The pore distribution became broad with the increase of the RH. The membranes had open pores as confirmed by the hydraulic permeation experiment. In addition, the water flux and membrane resistance (R_m) were greatly affected by the composition of polymer solution and the RH. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1195–1202, 2002