Filler Wetting in Miscible ESBR/SSBR Blends and Its Effect on Mechanical Properties

The selective wetting behavior of silica in emulsion styrene butadiene rubber (ESBR)/solution styrene butadiene rubber (SSBR) blends is characterized by the wetting concept, which is further developed for filled blends based on miscible rubbers. It is found that not only the chemical rubber–filler affinity but also the topology of the filler surface significantly influences the selective filler wetting in rubber blends. The nanopore structure of the silica surface has been recognized as the main reason for the difference in the wetting behavior of the branched ESBR molecules and linear SSBR molecules. However, the effect of nanopore structure becomes more significant in the presence of silane. It is discussed that the adsorption of silane on silica surface constricts the nanopore to some extent that hinders effectively the space filling of the nanopores by the branched ESBR molecules but not by the linear SSBR molecules. As a result, in silanized ESBR/SSBR blends the dominant wetting of silica surface by the tightly bonded layer of SSBR molecules causes a low‐energy dissipation in the rubber–filler interphase. That imparts the low rolling resistance to the blends similar to that of a silica‐filled SSBR compound, while the ESBR‐rich matrix warrants the good tensile behavior, i.e., good abrasion and wear resistance of the blends.

     

Energetics and Structure of Polymer‐Derived Si–(B–)O–C Glasses: Effect of the Boron Content and Pyrolysis Temperature

The structure and properties of polymer‐derived Si–(B–)O–C glasses have been shown to be significantly influenced by the boron content and pyrolysis temperature. This work determined the impact of these two parameters on the thermodynamic stability of these glasses. High‐temperature oxide melt solution calorimetry was performed on a series of amorphous samples, with varying boron contents (0–7.7 at.%), obtained by pyrolysis of precursors made by a sol–gel technique. Thermodynamic analysis of the calorimetric results demonstrated that at a constant pyrolysis temperature, adding boron makes the materials energetically less stable. While the B‐containing glasses pyrolyzed at 1000°C were energetically less stable than the competitive crystalline components, increasing the pyrolysis temperature to 1200°C led to their enthalpic stability. ²⁹Si and ¹¹B MAS nuclear magnetic resonance (NMR) spectroscopy measurements on selected samples confirmed a decrease in the concentrations of mixed Si‐centered SO_iC_4?i and B‐centered BO_jC_3?j bonds at the expense of formation of SiO₄ and B(OSi)₃ species (indicating a tendency toward phase separation) when the boron content and pyrolysis temperature increased. In light of the findings from calorimetry and NMR spectroscopy, we propose a structure–energetic relationship in Si–(B–)O–C glasses.     

An Oral Male Courtship Pheromone Terminates the Response of Nasonia vitripennis Females to the Male-Produced Sex Attractant

Sex pheromones are crucial for mate finding in many animals. Long-range attraction, mate recognition, and the elicitation of sexual receptiveness during courtship are typically mediated by different compounds. It is widely unknown, however, how the different components of a species’ pheromone system influence each other. Here, we demonstrated in the parasitoid wasp Nasonia vitripennis that females quickly cease to respond to the male sex attractant after they contact a male’s oral secretion during courtship. We used this behavioral switch to monitor the fractionation of head extracts from male wasps for identification of the bioactive compounds as a blend of ethyl oleate, ethyl linoleate, and ethyl α-linolenate. This is the first identification of a cephalic courtship pheromone in parasitic Hymenoptera. Plasticity in pheromone-mediated sexual behavior of female insects has hitherto been attributed to the transfer of bioactive proteinaceous molecules with the male ejaculate. The pheromone interaction reported here sheds new light on the sexual communication of insects by showing that the sex pheromone response of females can be terminated by males independent of sperm transfer.     

High Chemical Diversity in a Wasp Pheromone: a Blend of Methyl 6-Methylsalicylate,Fatty Alcohol Acetates and Cuticular Hydrocarbons Releases Courtship Behavior in the Drosophila Parasitoid Asobara tabida

Wasps of genus Asobara, a larval parasitoid of Drosophila, have become model organisms for the study of host-parasite interactions. However, little is known about the role of pheromones in locating mates and courtship behavior in this genus. In the present study, we aimed to identify the female courtship pheromone in Asobara tabida. The chemical compositions of solvent extracts from male and female wasps were analyzed by GC/MS. These extracts, fractions thereof, and synthetic pheromone candidates were tested for their activity in behavioral bioassays. The results demonstrate that the courtship pheromone of A. tabida is characterized by a remarkable chemical diversity. A multi-component blend of female-specific compounds including methyl 6-methylsalicylate (M6M), fatty alcohol acetates (FAAs), and cuticular hydrocarbons (CHCs) released male courtship behavior. Using a combinatory approach that included both purified natural products and synthetic analogs, it was shown that none of the three chemical classes alone was sufficient to release a full behavioral response in males. However, a blend of M6M and FAAs or combinations of one or both of these with female-derived CHCs resulted in wing-fanning responses by males comparable to those elicited by the crude extract of females. Thus, components from all three chemical classes contribute to the bioactivity of the pheromone, but none of the elements plays a key role or is irreplaceable. The fact that one of the FAAs, vaccenyl acetate, is also used as a kairomone by Asobara females to locate Drosophila hosts suggests that a pre-existing sensory responsiveness to vaccenyl acetate might have been involved in the evolution of the female sex pheromone in Asobara.     

2‐(1‐Ethynylpyrene)‐Adenosine as a Folding Probe for RNA—Pyrene in or out

A series of short RNA duplexes containing one or two 1‐ethynylpyrene‐modified adenine bases was synthesised. The melting behaviour of these duplexes was examined by monitoring temperature‐dependent pyrene fluorescence. In the singly modified RNA duplexes, the bases flanking the ethynylpyrene‐rA were varied to examine the sequence specificity of the fluorescence change of pyrene upon RNA hybridisation. Because an increase in pyrene fluorescence upon melting of the duplex can be correlated with intercalation of pyrene, and a decrease is usually associated with the position of pyrene outside the strand, a relationship between the flanking bases and the tendency of the dye to intercalate has been established. It was found that pyrene intercalation is less likely to take place if the modified base is flanked only by A–U base pairs. Flanking G–C base pairs, even only in the 5′‐direction of the modified base, will favour intercalation. In addition, we examined a doubly modified compound that had a pyrene located on each strand. The spectra indicated that the two pyrenes were close enough for interaction. Upon melting of the strand, a fluorescence blue shift corresponding to the dissociation of the pyrene–pyrene complex could be observed in addition to the intensity effect already known from the singly modified compounds. Two melting curves based on the different properties of the fluorophore could be extracted, leading to different melting points corresponding to the global duplex melting and to the change of local pyrene environment, respectively.     

Blends of Two Perylene Derivatives: Mesogenic Properties and Application As Emitter Materials in OLEDs

Blends consisting of two components, namely a liquid crystalline perylene ester and a bilaterally extended perylene ester, were studied. The liquid crystalline properties of these blends were investigated in detail by means of polarized optical microscopy and differential scanning calorimetry. The resulting phase diagram was used to explore the potential of these blends as emitter layers in OLEDs, which were prepared via thermal evaporation in a vacuum and spin coating of solutions.     

Proton Conduction in Dense and Porous Nanocrystalline Ceria Thin Films

The electrical conductivity of ceria thin films (epitaxial as well as dense and porous nanocrystalline) is investigated in dry and wet atmosphere at temperatures below 500 °C. For the epitaxial and the fully dense nanocrystalline samples, no significant differences can be observed between dry and wet conditions. In marked contrast, the nanocrystalline porous films obtained via spin coating exhibit a considerable enhancement of the protonic conductivity below 300 °C in wet atmosphere. This outcome reveals that the residual open mesoporosity plays the key role for the enhancement of the proton transport at low temperatures and not the high density of grain boundaries. The quantitative analysis of the various pathways, along which the proton transport can take place, indicates that the observed proton conduction can arise not only from bulk water adsorbed in the open pores but also from the space charge zones on the water side of the water/oxide interface.