数字频率合成技术在地球站中的应用

数字分频式微波频率合成器,具有结构简单,造价低,良好的低相嗓特性等优点,因而被通信卫星地球站所广泛采用。论述了数字分频式频率合成技术在工星通信地球站中的应用,提出了采用高度集成锁相环器件:PE3336设计一种低相噪特性的微波数字频率源的工程实例,并将之用于某通信卫星转发器地球站设备中。     

天然竹芋淀粉及其接枝共聚

分析了竹芋淀粉的伴生物组成，粒径分布及直链淀粉的含量，研究了竹芋淀粉与甲基丙烯酸甲酯的接枝共聚，用偏光显微镜，Ｘ射线衍射等方法研究了淀粉接枝共聚反应前后的结构与形态，认为淀粉的结晶区和非晶区均为接权共聚反应的场所。     

Synthesis and Crystal Structure of RE[CH_2(CH_2)_4CONC_4H_9]_3(NO_3)_3(RE=Dy,La)

ＳｙｎｔｈｅｓｉｓａｎｄＣｒｙｓｔａｌＳｔｒｕｃｔｕｒｅｏｆＲＥ［ＣＨ２（ＣＨ２）４ＣＯＮＣ４Ｈ９］３（ＮＯ３）３（ＲＥ＝Ｄｙ，Ｌａ）ＷａｎｇＨａｎｚｈａｎｇ（王汉章），ＸｕＱｉｎｇｆｅｎｇ（徐庆锋），ＱｉａｎＰｕ（钱朴）ＳｕｎＪｉａｎｐｉｎｇ（孙建...     

Pressure Behavior for Spherical Flow in a Reservoir of Non-Newtonian Power-Law Fluids

The pressure variations during polymer flooding of oil reservoirs for oil recovery projects can be used to analyze the flow in the reservoir which is especially useful for the partially perforated reservoirs. This paper presents a relationship between the viscosity and the shear rate which is similar to forms developed for radial flow (Odeh, A. S., Yang, H. T. ([1979]). SPEJ. AIME (Jun.) 155). The power-law viscosity model is used to give the variation of the fluid viscosity with the spherical radius for a mathematical model of unsteady spherical flow for non-Newtonian fluids with wellbore storage and skin. An analytical solution for the wellbore pressure responses derived in Laplace space is used to analyze the behavior characteristics at early and later times to interpret the well-test parameters. The pressure variations are similar to those for a Newtonian fluid at the early times, but at later times, the variation of the viscosity with the power-law exponent is important, so the pressure response differs from that for a Newtonian fluid. The solution has significance for interpreting well test parameters for non-Newtonian spherical flow.     

N-溴丁二酰亚胺／吡啶氧化合成己二酰基双偶氮化合物

以己二酰二氯和不同取代基的苯肼合成了N,N'-二芳基己二酰二肼类中间体,然后在N-溴丁二酰亚胺(NBS)／吡啶氧化体系下室温合成了8种己二酰基双偶氮化合物。第一步反应条件为:n(己二酰二氯):n(取代苯肼)=1:2,反应温度0-5℃,反应时间4 h,收率80%-93％;第二步反应条件为:n(N,N’-二芳基己二酰二肼):n(NBs／吡啶)=1:2,氧化反应时间0．5-1．0 h,收率80%-94%。并用元素分析、IR、1H NMR对合成的中间产物及目标化合物进行了表征。     

小型圆形耐高压电连接器的研制

通过绝缘材料的选取及耐高压结构的合理设计来提高电连接器的耐高压性能。25 000V耐压试验及其他性能测试表明,小型圆形耐高压电连接器满足了用户的要求。     

我国低浓度磷肥的发展策略和过磷酸钙生产的技改方向

从我国磷矿资源以中低品位磷矿居多,低浓度磷肥本身含有作物所需中微量元素,低浓度磷肥制造成本低及我国农民长期的使用习惯,论述低浓度磷肥在我国存在的必要性。过磷酸钙企业目前存在规模小、分散、生产技术落后、污染严重、废弃物利用率低等问题,提出过磷酸钙生产的技改方向,如无熟化造粒技术,采用浓酸矿浆法并同时采用集散微机自控技术,主要设备实行定型化、系列化等,以增强企业的竞争力。     

信息家电控制接口电路设计及其FPGA实现

介绍了用于信息家电控制接口电路的一种实现方案，主要功能是自动接收串行数据并存入片内RAM，进行误码检测，并对控制码进行译码处理，发出对家电的开关控制指令。综合、仿真与测试结果表明设计的系统能完成预定的功能。     

Hybrid switching and p-routing for optical burst switching networks

One promising switching technology for wavelength-division multiplexing optical networks is optical burst switching (OBS). However, there are major deficiencies of OBS. (1) The delay offset between a control message and its corresponding data burst is based on the diameter of a network. This affects network efficiency, quality-of-service, and network scalability.( 2) OBS adopts one-way resource reservation scheme, which causes frequent burst collision and, thus, burst loss. We address the above two important issues in OBS. In particular, we study how to improve the performance of delay and loss in OBS. To reduce the end-to-end delay, we propose a hybrid switching scheme. The hybrid switching is a combination of lightpath switching and OBS switching. A virtual topology design algorithm based on simulated annealing to minimize the longest shortest path through the virtual topology is presented. To minimize burst collision and loss, we propose a new routing algorithm, namely, p-routing, for OBS network. The p-routing is based on the wavelength available probability. A path that has higher available probability is less likely to drop bursts due to collision. The probability-based p-routing can reduce the volatility, randomness, and uncertainty of one-way resource reservation. Our studies show that hybrid switching and p-routing are complementary and both can dramatically improve the performance of OBS networks.     

低阶煤煤层气富集模式初探

通过对美国粉河盆地以及我国铁法盆地煤层气富集规律的解剖,总结出影响低阶煤煤层气富集的关键因素是封堵,而构造、岩性和水动力是形成煤层气封堵的主要因素。同时提出了5种不同的煤层气富集模式,即背斜模式、构造—水动力模式、构造—岩性模式、岩性—水动力模式和岩性模式。