含砷、锑、碳难处理金精矿焙烧氰化提金工艺研究

镇沅含砷、锑、碳难处理金精矿直接氰化金浸出率小于 10 % ,采用常规焙烧 -焙砂氰化提金工艺金浸出率仅达到 73 2 % ,而采用先行除锑 ,再焙烧脱除硫、碳、砷的提金工艺方案 ,金氰化浸出率达到90 4 % ,同时锑可作为锑精矿外售 ,经济效益明显。     

碾压混凝土坝施工进度与质量控制的新措施

碾压混凝土重力坝和拱坝由于连续施工的坝体混凝土体积大，施工期间需要采取较为严格的温度控制措施，而所采取的温控措施是否有效，目前尚没有一个能够用于实际施工过程的快速有效的评估方法和方式，不能根据已施工坝体内的实际情况来控制施工进度和质量。利用分布式光纤温度测量系统来快速地获得坝体混凝土内部的大量温度信息，进而实际标定温度仿真程序并通过标定过程模拟拟施工的连续碾压层，以检验其温控措施的有效性。通过坝体内部的温度、温度变化速率和梯度来达到实时控制坝体碾压上升速度、坝面和仓面养护、以及冷缝灌浆处理等目的。     

Selective monitoring of peptidase activities with synthetic polypeptide substrates and polyion-sensitive membrane electrode detection

A novel method to monitor specific peptidase activities in biological samples as complex as undiluted plasma/blood is described. The approach is based on the design of synthetic polypeptide substrates in which di- or triarginine sequences are linked to each other via one or more other amino acids recognized specifically by the peptidase to be determined. Detection of chymotrypsin and renin activities using synthetic substrates P4 (F-R-R-R-F-V-R-R-F-NH2) and P5 (R-R-R-L-L-R-R-L-L-R-R-R), respectively, serves to demonstrate the principles of this new assay system. A polyion-sensitive membrane electrode, prepared by doping polymer films with dinonylnaphthalene-sulfonate (DNNS), is shown to exhibit significant nonequilibrium electromotive force (EMF) responses toward these and other polycationic substrates at microgram/milliliter levels under physiological conditions. The same electrode, however, exhibits much smaller total EMF response toward the shorter fragments of the synthetic peptides generated by peptidase activity; hence, the addition of peptidase to a solution containing the synthetic substrate yields a change in electrode EMF response, the rate of which is proportional to the activity of peptidase present. Other synthetic polycationic peptides as well as natural polycationic peptides (e.g., protamine) that lack specific cleavage sites for chymotrypsin and renin, yet are detected by the DNNS-based membrane electrode, do not elicit any significant change in EMF response in the presence of the peptidases, confirming the feasibility and utility of the proposed bioanalytical method.     

Mixing in processing of thermoplastics by extrusion

Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 8, pp. 9–11, August, 1993.     

128kb／s电视电话系统中数码率缓存器的控制策略研究

本文探讨了电视电话／会议电视的Ｈ，２６１建议中低码率时（ｐ＝２）数码率缓存器的控制问题，提出一种既有宏观预分配又有微观分割的控制策略（简称ＧＡＬＳ），并用测试图像序列进行了计算机模拟。将本文方法与ＲＭ８中有关策略作了比较，实验结果表明图像的主观质量有所改善。     

湿化学法制备纳米ATO导电粉

采用非均相成核法 ,在Sn(OH) 4 晶种上均匀生长Sb掺杂Sn(OH) 4 ,制备纳米ATO粉末。以电阻测定系统研究了合成条件如掺杂浓度、反应温度、pH值、SnCl4浓度等对最终粉末电阻性能的影响。以TG DSC热分析、XRD、TEM等手段研究了晶粒生长过程 ,XRD显示为四方金红石型结构 ,平均粒径为15nm。当Sb/Sn(mol比 ) =0 .0 5 ,pH =2 ,T =60℃ ,SnCl4=1.2～ 1.8mol·L-1时 ,粉体电阻小于 0 .5Ω。     

a—Si等离子体刻蚀的研究

将等离子体刻蚀应用于非晶硅的刻蚀中,得到边缘整齐、分辩率高、重复性好、图形清晰的满意效果。通过调整工艺条件,可严格控制刻蚀速率。其特点优于湿式化学腐蚀,是一种非晶硅特性研究和器件制造中值得推广和使用的方法。     

Al(OH)3对硅橡胶性能的影响

综述了Al（OH)3粒径和用量对硅椽胶漏电电流、脉冲电流、耐漏电起痕、表面粗糙程度、电蚀损、介电性能、拉伸强度及漏电电流实验重复性的影响。     

水布垭高砼面板堆石坝非线性和弹塑性分析

 主要介绍采用二维非线性和三维弹塑性有限元法对水布垭高砼面板堆石坝进行应力变形分析研究的成果。研究成果论证了设计方案的合理性和可行性。弹塑性模型由于能反映材料在高压应力条件下的剪缩特性，因而其成果更合理些。     

瞬时吸收率检测与高频噪声的剔除

在高分辨率处理过程中，由于地震数据记录中存在着一类并不被人们十分注意的，但影响却十分严重的高频噪声，使得高分辨率处理结果陷入一种“混沌”状态。为此，本文仔细分析和研究了这类噪声产生的物理机制和原因，并提出瞬时吸收率检测与高频噪声剔除的方法。