The photopolymerisation of methacrylic acid by colloidal semiconductors

Summary Methacrylic acid was photopolymerised using CdS and composite, CdS/HgS and CdS/TiO₂, colloidal semiconductor particles as initiators. The previously proposed photoinitiation mechanism involving the photogenerated positive hole in the valence band of the CdS colloid was confirmed by the electron scavenging action of TiO₂. The effect of pH on the course of the polymerisation was investigated and is discussed.     

Amplitude-modulation detection in single-stage negative-feedback amplifiers due to interfering out-of-band signals

The electromagnetic-interference effects of out-of-band signals on negative-feedback amplifiers are investigated. It is assumed that the interfering signals picked up at the input of the amplifier are dominant. Due to the nonlinear behavior of the active devices in the amplifier, unwanted dc shifts and amplitude-modulation (AM) detection may occur. Describing these effects is usually done by using the Volterra series. Although providing good results when used for analysis, methods to use the Volterra series for the design process are not yet mature enough. A simple procedure for calculating AM detection is presented. An equivalent source at the input of the amplifier is introduced that accounts for the nonlinear effects. Because the characteristics of this source are computed as a function of design parameters, this procedure facilitates a synthesis approach for designing amplifiers with a lower susceptibility to AM detection. It is shown that the root locus of the amplifier transfer function has a large influence on the amount of AM detection and, therefore, on the electromagnetic compatibility. Measurements made on a single-stage negative-feedback amplifier support the presented procedure.     

Unsteady two-film model for mass transfer

The classical two-film model for mass transfer between two fluid phases can only be used to describe the steady state mass transfer mechanism. Both the penetration and the film-penetration model are also valid solely when only one diffusion boundary layer exists at the interface between the phases. With a view to surmounting the limitations of the above models a new model has been developed for the mass transfer between two fluid phases with two diffusion boundary layers at the interface. The new model is based on the two-film concept and the Danckwerts distribution function, and is also able to simulate the unsteady state mass transfer mechanism between two fluid phases with two different boundary layers.     

Brain-computer communication: motivation, aim, and impact of exploring a virtual apartment.

The step away from a synchronized or cue-based brain-computer interface (BCI) and from laboratory conditions towards real world applications is very important and crucial in BCI research. This work shows that ten naive subjects can be trained in a synchronous paradigm within three sessions to navigate freely through a virtual apartment, whereby at every junction the subjects could decide by their own, how they wanted to explore the virtual environment (VE). This virtual apartment was designed similar to a real world application, with a goal-oriented task, a high mental workload, and a variable decision period for the subject. All subjects were able to perform long and stable motor imagery over a minimum time of 2 s. Using only three electroencephalogram (EEG) channels to analyze these imaginations, we were able to convert them into navigation commands. Additionally, it could be demonstrated that motivation is a very crucial factor in BCI research; motivated subjects perform much better than unmotivated ones.     

An integer concave minimization approach for the minimum concave cost capacitated flow problem on networks

Formulating the minimum concave cost capacitated network flow problem as an integer concave minimization problem, we establish finite branch and bound algorithms, in which the branching operation is the so–called integral rectangular partition and the bounding procedure is performed by the classical minimum linear cost flow problem on subnetworks. For the special case that the flow cost function is concave on a fixed number of arcs and linear on the others, an upper bound of the running time is given. Received: 19 July 1996 / Accepted: 8 July 1997     

The Dübendorf Study: a population-based investigation on normal values of blood pressure self-measurement

In a retrospective study of 50 consecutive children with posterior fossa tumors treated at Texas Children's Hospital, Houston, Tex., in 1989-1992, we evaluated perioperative factors which might influence the development of postoperative cerebrospinal fluid leaks. Factors analyzed included the presence of preoperative hydrocephalus, the institution of cerebrospinal fluid diversion, and the method of dural closure. No statistically significant impact on subsequent cerebrospinal fluid leakage was demonstrated.     

Development and characterization of a biocompatible OH-modified copolymer based on polyurethane

Different polyurethanes were synthesized by varying the diol as well as the diisocyanate components and chain extenders. Polyurethanes with OH-groups were obtained by photo- and thermoinitiation of the radical polymerization of hydroxy alkyl acrylates in the presence of the polyurethanes. The polymers were evaluated with respect to their biocompatibility by measuring the cell spreading, the rates of DNA- and protein synthesis and the swelling behaviour. The differences in the surfaces and the bulks between the selected basic polyurethane and the functionalized modification were determined and characterized by XPS, FTIR-ATR and ¹³C-FT-NMR-spectroscopy. The mechanical data of Tecoflex EG 60D® and Pellethane 2363–80AE® were compared with the data of the synthesized polyurethanes.     

Membranen in der Verfahrenstechnik

Membranes in chemical engineering . In the last 10 years membranes and membrane processes have evolved from a useful laboratory tool to an industrial product of significant technical and commercial impact. In some applications membrane processes have today not only replaced some conventional separation procedures in the chemical process industry, because they are often more economical and yield better quality products, but they have also successfully been utilized to solve mass separation problems where conventional procedures failed or are too expensive. This contribution discusses the state of the art of membranes and membrane processes as well as their major applications, with the main emphasis being placed on more recent developments.     

Nutrient balance of shifting cultivation by burning or mulching in the Eastern Amazon – evidence for subsoil nutrient accumulation

For over a hundred years shifting cultivation with slash-and-burn land preparation has been the predominant type of land use by smallholders in the Bragantina region of the Brazilian Eastern Amazon. This study contrasts the nutrient balance of slash-and-burn agriculture with a fire-free cultivation. Therefore, one half of a 3.5-year-old (28.7 t DM ha^–1) and a 7-year-old woody fallow vegetation (46.5 t DM ha^–1) was burnt and the other half mulched, leaving the biomass as a surface residue. Subsequently, a sequence of maize, beans and cassava was cropped for 1.5 year. Burning the 3.5- and 7-year-old fallow removed 97 and 94% of the C, 98 and 96% of the N, 90 and 63% of the P-stocks, and between 45 and 70% of the cations K, Mg and Ca of the aboveground biomass by volatilization or ash-particle transfer. These losses were avoided with the slash-and-mulch land preparation. Mulching did not increase the losses of nutrients by leaching, despite the high amount of rapidly decomposing surface mulch. Also the length of preceding fallow had no significant influence on leaching losses. At a depth of 3 m, leached nutrients were quantitatively negligible in both treatments. Comparing the nutrient fluxes at soil depths of 0.9 m, 1.8 m and 3 m, the amounts of all mobile nutrients, and also of chloride and sodium were markedly reduced during percolation and must have been retained. It is likely that nutrient retention in the subsoil layer is only temporary, emphasizing the need for a rapid re-establishment of the naturally deep-rooting secondary vegetation after abandonment of sites to enable uptake of these nutrients. The overall nutrient balance was highly negative for slash-and-burn. 291 and 403 kg N ha^–1, 21 and 18 kg P ha^–1, and 70 and 132 kg K ha^–1 were removed from the burnt plots with a preceding fallow of 3.5 and 7 years, respectively. A reduced fallow period (3.5 years), which is a common trend in the region, resulted in a higher mean annual rate of nutrient loss averaged over the duration of the cycle than a fallow period of 7 years. Eliminating the burning losses by mulching brought the agricultural system back to an equilibrated or even slightly positive nutrient balance, even after a reduced fallow period. Thus, slash-and-mulch is a viable alternative to maintain agricultural productivity and ecosystem functioning.     

Physical gelation of crystallizing metallocene and Ziegler-Natta ethylene-hexene copolymers

The effect of molecular architecture on the evolution of viscoelastic properties during crystallization was investigated using ethylene-hexene copolymers manufactured via metallocene (M-LLDPE) and Ziegler-Natta (ZN-LLDPE) processes. Differences in branching distribution were shown to have a drastic effect on the viscoelastic properties near the gel point. It is shown that the branching distribution rather than branch content is the determining parameter for the evolution of the rheological properties during isothermal and non-isothermal crystallization, and for the width of the solidification interval. We developed a partial melting technique for the preparation of stable critical gels of LLDPE whose viscoelastic properties correspond to the intermediate state between melt and solid. Local molecular conformation and crystallinity in these gels were characterized by Raman spectroscopy, which shows that the transition from melt-like to solid-like rheological behavior (physical gelation) in LLDPE occurs at a very low overall crystallinity of less than 5%.