Manipulation of Micro Solid Particles and Induced Flows in Water by Laser Irradiation

Q-switch for pulsing laser beam and Galvano scanner for rapid scanning laser beam were adapted to manipulatemicro solid particles in a water droplet.The trapping of fine particles at micron-sized diameters by a YAG lasersystem,induced flows,and the induced motion of the particles by laser beam irradiations are discussed.Particlerotations are observed by using anisotropic micro objects,and moreover the rotational rate with clockwise direc-tion is 22 r/min.The fragments of a cover glass were mixed in a water droplet,and their size and shape are un-even.The rotation of that non-spheres without scanning by the Galvano scanner is also observed in water.     

Preparation of Copper-Ruby Glasses by Sputtering: The Effect of Atmosphere on the Growth of Copper Particles

Copper-ruby glasses were prepared by the sputtering method and the effect of reducing treatment was examined. The reducing was carried out either during sputtering or heat treatment. Optical absorption was related to the growth of copper particles. The results are summarized as follows: (i) the volume fraction of copper particles in the glasses which are heat-treated in air increases with the addition of hydrogen in the sputtering gas. (ii) The copper particles do not grow larger than 8 nm by heat treatment in reducing atmosphere, whereas they grow as large as 12 nm in air. (iii) Reducing during heat treatment gives a pronounced effect only when sputtering was not carried out under reducing conditions. The origin of these phenomena was also discussed, considering the mechanism of nucleation and growth of copper particles.     

An Electronic Approach to Materials Design

A molecular orbital approach to materials design has recently made great progress. This approach is based on the electronic structure calculations by the DV-Xα cluster method. In this paper recent progress in this approachis reviewed. In particular     

Preparation and properties of transparent cellulose hydrogels

Highly transparent cellulose hydrogels with physical crosslinkage were prepared from nonaqueous organic cellulose solutions and viscose by coagulating and regenerating cellulose in an aqueous solution containing a water‐miscible organic solvent. Nonaqueous organic cellulose solutions used were LiCl/dimethylacetamide, paraformaldehyde/dimethyl sulfoxide, and triethylammonium chloride/dimethyl sulfoxide. Preparation conditions and physical properties of the transparent cellulose hydrogels were studied. The transparency of the cellulose hydrogels depended on the composition of the aqueous solution containing the organic solvent. Furthermore, transparent cellulose hydrogels from viscose showed high tensile strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3020–3025, 2003     

The oxidation properties of fourth generation single-crystal nickel-based superalloys

The fourth-generation nickel-based single-crystal superalloys, which contain large amounts of refractory metals for strengthening and platinum group metals for topologically close-packed phase prevention, show excellent high-temperature strength. However, these alloying elements seem to decrease high-temperature oxidation resistance. In this study, nickel-based superalloys with various amounts of tantalum, rhenium, and ruthenium were examined in isothermal and cyclic exposures at 1,100°C to investigate the effect on the oxide growth rate and resistance to scale spallation. Ruthenium and rhenium were found to degrade the oxidation resistance by the vaporization of their oxide. Tantalum-rich oxide in the spinel layer acts to stabilize ruthenium and rhenium oxide in the scale. The addition of hafnium and yttrium is effective in improving the oxidation resistance of ruthenium-containing nickel-based superalloys.     

A high resolution negative working resist,LMR-UV,for g- and i-line lithography

LMR-UV (“low molecular weight resist for uv lithography”), a naphthoquinone-diazide sulfonic acid ester of a novolak resin, is a negative working resist. The mechanism of insolubilization of LMR-UV is based on the facts that the naphthoquinone-diazide moiety is decomposed to indenecarboxylic acid (polar compound) by photolysis upon UV irradiation and that the irradiated resist film insolubilizes in a non-polar developer. LMR-UV reliably forms 0.6 μm lines and spaces over a reflective substrate with steps by using a g-line stepper having a 0.35 NA lens. 0.6 μm-wide aluminum patterns over topography are obtained by use of g-line exposure and reactive ion etching. By use of an i-line aligner (NA = 0.42), LMR-UV resolves 0.25 μm space patterns with overhang profiles. The profiles are due to the large absorption coefficient of 3.8 μm^?1. 0.3 μm wide aluminum patterns are formed by i-line exposure and lift-off metallization.     

An investigation of induced voltages to an underground gas pipeline from an overhead transmission line

This paper investigates induced voltage characteristics from an overhead transmission line by applying a method of modeling of induced voltages proposed by the authors. EMTP simulation results obtained by the modeling method agree with analytical results obtained from a well‐known formula. The induced voltages are significantly dependent on the configuration of the overhead line. A horizontal line induces the largest voltage in a gas pipeline, and the voltage induced by a vertical twin‐circuit line is about 20% smaller than that induced by a vertical single‐circuit line. The method is applied to a real pipeline system and the simulation results show reasonable agreement with field test results. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(1): 43–51, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20465     

Catalytic decomposition of biomass tars with iron oxide catalysts

Catalytic gasification of wood (Cedar) biomass was carried out using a specially designed flow-type double beds micro reactor in a two step process: temperature programmed non-catalytic steam gasification of biomass was performed in the first (top) bed at 200–850 °C followed by catalytic decomposition gasification of volatile matters (including tars) in the second (bottom) bed at a constant temperature, mainly 600 °C. Iron oxide catalysts, which transformed to Fe₃O₄ after use possessed catalytic activity in biomass tar decomposition. Above 90% of the volatile matters was gasified by the use of iron oxide catalyst (prepared from FeCl₃ and NH_3aq) at SV of 4.5 × 10³ h^?1. Tar was decomposed over the iron oxide catalysts followed by water gas shift reaction. Surface area of the iron oxide seemed to be an important factor for the catalytic tar decomposition. The activity of the iron oxide catalysts for tar decomposition seemed stable with cyclic use but the activity of the catalysts for the water gas shift reaction decreased with repeated use.     

Changes in the thermomechanical behavior of epoxy glasses under the state of strain aging

Changes in thermomechanical behavior with structural relaxation taking place in epoxy glasses were studied. Differential scanning calorimetry measurements and thermostimulated strain recovery tests were performed for specimens deformed and then aged under fixed strain. In the course of heating, the specimens started to absorb thermal energy, whereas plastic strain was still stable. At higher temperatures, plastic strain started recovery, which was accompanied by exothermic behavior of the specimen. With an increase in the aging duration, the endothermic peak signified and moved to a higher temperature. These results indicated that the longer the aging duration was, the harder the plastic strain and strain energy were frozen in the glassy structure. This freeze‐strain phenomenon was observed for crosslinked epoxy glass, as well as polymeric glasses with linear molecular structures, aged under strain. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008