A simple,physical calculation of the response of a buried conducting drum to electromagnetic induction searching

A very simple, physical calculation of the magnitude of the response of a single buried conducting drum to electromagnetic induction searching is given     

The influence of vadose zone conditions in groundwater pollution: Part II: Fluid movement

This is the concluding portion of a two-part review illustrating the influence of the vadose zone (i.e., soil materials located above a water table) on groundwater pollution. Seepage from landfills, lagoons, storage areas and land treatment sites invariably must pass through this region before entering an aquifer. In general, contaminant concentrations are highest near the source. Much of this zone is unsaturated, so that leachate and wastewater may have access to oxygen and be in close contact with solid particle surfaces. Consequently, conditions in the vadose zone affect both the seepage rate and the environment for attenuation of contaminant species.The focus of this paper is on the application of Darcy's formula to describe the flow of water, leachate and other fluids under both saturated and unsaturated conditions. The discussion is presented in a state-of-the-art format. Individual topics include the material properties that influence flow and the relationship between seepage rate, fluid pressure and the degree of saturation.To illustrate these concepts, five generalized examples are presented. They describe a wide range of practical situations, including:? steady vertical seepage? flow in the vadose zone parallel to a water table? development of groundwater mounds under liquid filled impoundments? wetting front advance through homogeneous soil? wetting front advance under lined impoundments These examples, and the principles from which they are derived, can be used both in analysis of existing situations and in design and operation of new facilities.This paper is a companion to one previously published which discussed static conditions in the vadose zone.     

The effect of microcrystalline cellulose on the mixing and compaction response of ferrous powders

Microcrystalline cellulose has physical and chemical qualities which can prove advantageous for a powder lubricant and binder. Specifically, it possesses good green strength, fine particle size, complete decomposition, cleanliness, i.e. <10 ppm metallic constituents, as well as good mixing response. In an experimental study, lubricant properties, specifically mixing and compaction response of microcrystalline cellulose (Avicel^® PH-105) are evaluated against standard lubricants (Acrawax^® and zinc stearate). Iron and stainless steel powders were compacted over a wide density range, i.e. 70 – 90%, at fixed lubricant additions in each range. Compaction characteristics were measured in order to evaluate the effects of the amount and type of lubricant upon consolidation pressure, ejection pressure, green density and green strength. With regard to mixing, compaction and sintering behavior, microcrystalline cellulose performed comparably to the standard lubricants in most cases. Considering the extreme purity, the material may be used as the prime lubricant in P/M processing particularly when metallic contaminants and decomposition products create processing/property difficulties.     

Flux‐Limited Diffusion for Multiple Scattering in Participating Media

For the rendering of multiple scattering effects in participating media, methods based on the diffusion approximation are an extremely efficient alternative to Monte Carlo path tracing. However, in sufficiently transparent regions, classical diffusion approximation suffers from non‐physical radiative fluxes which leads to a poor match to correct light transport. In particular, this prevents the application of classical diffusion approximation to heterogeneous media, where opaque material is embedded within transparent regions. To address this limitation, we introduce flux‐limited diffusion, a technique from the astrophysics domain. This method provides a better approximation to light transport than classical diffusion approximation, particularly when applied to heterogeneous media, and hence broadens the applicability of diffusion‐based techniques. We provide an algorithm for flux‐limited diffusion, which is validated using the transport theory for a point light source in an infinite homogeneous medium. We further demonstrate that our implementation of flux‐limited diffusion produces more accurate renderings of multiple scattering in various heterogeneous datasets than classical diffusion approximation, by comparing both methods to ground truth renderings obtained via volumetric path tracing.     

Development of permanent magnet MnAlC/polymer composites and flexible filament for bonding and 3D-printing technologies

Searching for high-performance permanent magnets components with no limitation in shape and dimensions is highly desired to overcome the present design and manufacturing restrictions, which affect the efficiency of the final devices in energy, automotive and aerospace sectors. Advanced 3D-printing of composite materials and related technologies is an incipient route to achieve functional structures avoiding the limitations of traditional manufacturing. Gas-atomized MnAlC particles combined with polymer have been used in this work for fabricating scalable rare earth-free permanent magnet composites and extruded flexible filaments with continuous length exceeding 10 m. Solution casting has been used to synthesize homogeneous composites with tuned particles content, made of a polyethylene (PE) matrix embedding quasi-spherical particles of the ferromagnetic τ-MnAlC phase. A maximum filling factor of 86.5 and 72.3% has been obtained for the composite and the filament after extrusion, respectively. The magnetic measurements reveal no deterioration of the properties of the MnAlC particles after the composite synthesis and filament extrusion. The produced MnAlC/PE materials will serve as precursors for an efficient and scalable design and fabrication of end-products by different processing techniques (polymerized cold-compacted magnets and 3D-printing, respectively) in view of technological applications (from micro electromechanical systems to energy and transport applications).     

Reasons for the Discoloration of Postconsumer Poly(ethylene terephthalate) during Reprocessing

Gray and/or yellow discoloration may occur during repeated heating of poly(ethylene terephthalate) (PET). Both phenomena can cause problems in further application. In this work, the reasons for the discoloration of PET during reprocessing are investigated by physical and chemical analysis such as colorimetry, size exclusion chromatography, viscosimetry (η_inh.), inductively coupled plasma mass spectrometry, X‐ray photoelectron spectroscopy, and MALDI‐ToF‐MS analysis. It is found that the antimony content which originates from catalyst residues used in PET synthesis has high influence on the gray discoloration obtained during reprocessing of PET. Antimony ions are reduced to elementary antimony during heating to temperatures above 230 °C as proven by X‐ray photoelectron spectroscopy. The yellow discoloration is partially generated by polyamide contaminants which are used as barrier layers in PET packaging materials such as soft drink bottles. In conclusion, to prevent discoloration of postconsumer PET during reprocessing different methods such as oxidation of gray metallic antimony or sorting out of polyamide contaminants are needed.

     

Accelerated Wound Closure of Deep Partial Thickness Burns with Acellular Fish Skin Graft

Thermal injuries are caused by exposure to a variety of sources, and split thickness skin grafts are the gold standard treatment for severe burns; however, they may be impossible when there is no donor skin available. Large total body surface area burns leave patients with limited donor site availability and create a need for treatments capable of achieving early and complete coverage that can also retain normal skin function. In this preclinical trial, two cellular and tissue based products (CTPs) are evaluated on twenty-four 5 × 5 deep partial thickness (DPT) burn wounds. Using appropriate pain control methods, DPT burn wounds were created on six anesthetized Yorkshire pigs. Wounds were excised one day post-burn and the bleeding wound beds were subsequently treated with omega-3-rich acellular fish skin graft (FSG) or fetal bovine dermis (FBD). FSG was reapplied after 7 days and wounds healed via secondary intentions. Digital images, non-invasive measurements, and punch biopsies were acquired during rechecks performed on days 7, 14, 21, 28, 45, and 60. Multiple qualitative measurements were also employed, including re-epithelialization, contraction rates, hydration, laser speckle, and trans-epidermal water loss (TEWL). Each treatment produced granulated tissue (GT) that would be receptive to skin grafts, if desired; however, the FSG induced GT 7 days earlier. FSG treatment resulted in faster re-epithelialization and reduced wound size at day 14 compared to FBD (50.2% vs. 23.5% and 93.1% vs. 106.7%, p < 0.005, respectively). No differences in TEWL measurements were observed. The FSG integrated into the wound bed quicker as evidenced by lower hydration values at day 21 (309.7 vs. 2500.4 µS, p < 0.05) and higher blood flow at day 14 (4.9 vs. 3.1 fold change increase over normal skin, p < 0.005). Here we show that FSG integrated faster without increased contraction, resulting in quicker wound closure without skin graft application which suggests FSG improved burn wound healing over FBD.     

UV-based advanced oxidation processes for the treatment of odour compounds: Efficiency and by-product formation

The occurrence of the taste and odour compounds geosmin and 2-methyl isoborneol (2-MIB) affects the organoleptic quality of raw waters from drinking water reservoirs worldwide. UV-based oxidation processes for the removal of these substances are an alternative to adsorption and biological processes, since they additionally provide disinfection of the raw water. We could show that the concentration of geosmin and 2-MIB could be reduced by VUV irradiation and the combination of UV irradiation with ozone and hydrogen peroxide in pure water and water from a drinking water reservoir. The figure of merit EE/O is an appropriate tool to compare the AOPs and showed that VUV and UV/O₃ yielded the lowest treatment costs for the odour compounds in pure and raw water, respectively. Additionally, VUV irradiation with addition of ozone, generated by the VUV lamp, was evaluated. The generation of ozone and the irradiation were performed in a single reactor system using the same low-pressure mercury lamp, thereby reducing the energy consumption of the treatment process. The formation of the undesired by-products nitrite and bromate was investigated. The combination of VUV irradiation with ozone produced by a VUV lamp avoided the formation of relevant concentrations of the by-products. The internal generation of ozone is capable to produce ozone concentrations sufficient to reduce EE/O below 1 kWh m⁻³ and without the risk of the formation of nitrite or bromate above the maximum contaminant level.     

HILIC-NMR: toward the identification of individual molecular components in dissolved organic matter

This article presents research targeted toward the isolation and detection of unique molecular structures from what is believed to be the world's most complex organic mixture: dissolved organic matter (DOM). Hydrophilic interaction chromatography (HILIC) was used to separate Suwannee River DOM (SRDOM) into 80 fractions, simplified to the extent that detection with nuclear magnetic resonance spectroscopy (NMR) results in many sharp signals that are indicative of individual compounds, some of which are identifiable with multidimensional NMR. Parallel factor analysis (PARAFAC) of fluorescence excitation-emission matrices (EEMs) was additionally employed on HILIC-simplified fractions to further confirm the effectiveness of the HILIC separations as well as draw insight into how structural characteristics relate to DOM fluorescence signals. Findings suggest that material believed to be derived from both cyclic and linear terpenoids was dominant in the most hydrophobic fractions as were the majority of the fluorescence signals, whereas hydrophilic material was highly correlated with carbohydrate-type structures as well as high contributions from amino acid fluorescence. NMR spectra of DOM, typically featureless mounds, are substantially more detailed with HILIC-simplified fractions to the point where hundreds of signals are present and 2D NMR correlations permit significant structural identifications.