A flamelet-based a priori analysis on the chemistry tabulation of polycyclic aromatic hydrocarbons in non-premixed flames

In this paper, the chemical response of different species to turbulent effects is investigated in the context of one-dimensional laminar non-premixed flamelets. Turbulent effects are modeled as abrupt changes in the scalar dissipation rate. One-dimensional unsteady flamelet calculations assuming unity-Lewis number for all species are performed for an ethylene/air configuration. From the time-evolution of the species mass fractions, it is found that transient effects are not substantial for radicals such as OH$\mathrm{OH}$ and H$\mathrm{H}$, and species such as CO,_CO2$\mathrm{CO}\text{,}{\mathrm{CO}}_2$ and _C2H2${\mathrm{C}}_2{\mathrm{H}}_2$, consistent with their small characteristic chemical time scales. The steady state flamelet assumption for these species is well justified and their mass fractions can be pre-tabulated using the steady state flamelet solutions legibly. On the other hand, aromatic species are characterized by relatively slow chemistry, and substantial transient effects are observed for these species. The evolution of their mass fractions and chemical source terms are studied through a reaction flux analysis. Specifically for Polycyclic Aromatic Hydrocarbons (PAH), the chemical production terms are found to be linearly proportional to the mass fraction of smaller aromatic species, and the chemical consumption terms are found to be linearly proportional to their own mass fractions. Based on the unsteady flamelet results, the validity of various existing flamelet-based pre-tabulation methods is examined, and a new linear relaxation model is proposed for PAH. The proposed relaxation model is validated through the unsteady flamelet formulation, and results are compared against full chemistry calculations.     

Fuzzy inference systems: An integrated modeling environment for collaboration between expert knowledge and data using FisPro

The present paper aims to demonstrate the interest of fuzzy inference systems in system modeling when human interaction is important. It discusses the originality of FIS and their capability to integrate expertise and rule learning from data into a single framework, analyzing their place relatively to concurrent approaches. An open source software implementation is presented, with a focus on the useful features for modeling. Two real world case studies are presented to illustrate the approach and the software utility.     

Transparent polycrystalline alumina obtained by SPS: Green bodies processing effect

Starting from a commercial slurry of high purity α-Al₂O₃, freeze-dried powders, cast, filter-pressed or cold isostatically pressed samples were produced. Resulting powders or green bodies showing different particles packing were densified by spark plasma sintering (SPS) to obtain transparent polycrystalline α-Al₂O₃. Microstructure and real in-line transmittance (RIT) after SPS were dependent on the particles packing quality. Avoiding large agglomerates, narrowing the pore size distribution, reducing the most-frequent pore size (D_mode) and avoiding macroscopic heterogeneities within the green bodies enabled high RIT values to be achieved in the visible and near-infrared spectrum. However, a limit was achieved in the preparation of green bodies for which reducing the D_mode had no more influence on the optical behaviour of samples sintered by SPS. Finally, pure α-Al₂O₃ samples presenting a high RIT_640 nm value of 53% were produced from all the green bodies obtained by the following techniques: filter-pressing, slip casting and cold isostatic pressing.     

A novel statistical generative model dedicated to face recognition

In this paper, a novel statistical generative model to describe a face is presented, and is applied to the face authentication task. Classical generative models used so far in face recognition, such as Gaussian Mixture Models (GMMs) and Hidden Markov Models (HMMs) for instance, are making strong assumptions on the observations derived from a face image. Indeed, such models usually assume that local observations are independent, which is obviously not the case in a face. The presented model hence proposes to encode relationships between salient facial features by using a static Bayesian Network. Since robustness against imprecisely located faces is of great concern in a real-world scenario, authentication results are presented using automatically localised faces. Experiments conducted on the XM2VTS and the BANCA databases showed that the proposed approach is suitable for this task, since it reaches state-of-the-art results. We compare our model to baseline appearance-based systems (Eigenfaces and Fisherfaces) but also to classical generative models, namely GMM, HMM and pseudo-2DHMM.     

SYBR®Green qPCR screening methods for the presence of “35S promoter” and “NOS terminator” elements in food and feed products

The Cauliflower Mosaic Virus “35S promotor” (p35S) and the Agrobacterium “Nopaline Synthase” terminator (tNOS) are the most represented generic recombinant elements in commercial genetically modified crops to date. A set of four new SYBR^®Green qPCR methods targeting the “p35S” and “tNOS” core elements have been developed. These qPCR methods generate short amplicons of 147 and 75 bp for the “p35S” element and 172 and 69 bp for the “tNOS” element. Single target plasmids containing these amplicons were constructed and allow determining the nominal melting temperature (T _m value) of each amplicon. The four methods are specific for their respective targets, and moreover, three of them are highly sensitive (up to 1–2 copies detectable) at a PCR efficiency ranging between 95 and 100%. The latter methods can detect their respective targets at 0.1% (w/w) gDNA levels and are suitable for detecting low levels of genetically modified materials containing the “p35S” and/or “tNOS” elements.     

An integrated on chip organic optical source based on electrochemiluminescence

We report here on an original “glass-PDMS-glass” electrochemiluminescence optofluidic device that integrates 32 electrodes on a large surface. This organic electrically powered light source has been integrated on chip using an alternative process based on a photopatternable silicone resist. Under a continuous flow rate, this device allows electrogenerated chemiluminescence for several minutes which would be very useful for future μTAS systems.     

Heat convection within evaporating droplets in strong aerodynamic interactions

The temperature field within evaporating ethanol droplets is investigated, relying on the two-color laser induced fluorescence (LIF) measurement technique and on a Direct Numerical Simulation (DNS). The configuration studied corresponds to a monodisperse droplet stream in a diffusion flame sustained by the droplet vapor. An experimental probe volume, small compared to the droplet size, is used to characterize the temperature field within the droplets, whereas DNS takes into account key aspects of the droplet heating and evaporation such as the non-uniform and transient stress, and the mass and heat transfer coefficients at the droplet surface. These investigations reveal that the frictional stresses are strongly reduced due to the small spacing between the droplets. They also show that the Marangoni effect has a significant influence on the internal motion and hence on the internal temperature field.     

Extraction of sheet resistance from four-terminal sheet resistorsreplicated in monocrystalline films with nonplanar geometries

This paper describes limitations of conventional methods of extracting sheet resistance from four-terminal sheet resistors incorporated into electrical linewidth test structures that are patterned in (110) monocrystalline silicon-on-insulator (SOI) films. Nonplanar sections of these structures render the extraction of sheet resistance by conventional techniques subject to systematic errors. The errors are addressed here by algorithms incorporating the results of finite-element current flow analysis. The intended end application is to facilitate the use of the uniquely high repeatability and low cost of electrical critical dimension (CD) metrology as a secondary reference in a traceability path for CD-reference artifacts     

2001 Transmission and Distribution Conference Preview

The author describes how available statistics and consumer participation indicate that, though not perfect, the benefits of UK electric utility privatization and competition outweigh the monopolistic structures of the past.