An empirical evaluation of active learning strategies for profile elicitation in a conversational recommender system

Journal of Intelligent Information Systems - Conversational Recommender Systems have received widespread attention in both research and practice. They assist people in finding relevant and...     

Prototyping and modeling of the centrifugal casting process for paraffin waxes

Centrifugal casting is a technology used for manufacturing hybrid rocket paraffin grains. This technology helps avoiding voids formation inside the solid paraffin as it cools. Voids are formed because of air bubbles being entrapped while pouring and because the liquid wax shrinks by 17–19% upon cooling. In this work, the centrifugal casting process for the manufacturing of paraffin cylinders was prototyped at two different scales considering critical casting issues. The effects of process parameters (rotational speed, melt temperature, and flow rate) on the tensile properties of the manufactured grains were analyzed. The results of the optimization conducted at the lower scale (2.5?kg) were up scaled to manufacture 25?kg grains. The resulting mechanical properties complied with the design specifications, and they were better than those characterized from the gravity cast wax. A numerical model of growth and dissolution of bubbles during the process was then developed to predict the quality of the castings. The numerical results showed how increasing the mold rotational speed up to 1800?rpm reduced the removal time. However, compared to grains solidification time, the predicted removal times were much shorter, proving the advantage of centrifugal casting in counteracting voids formation.     

Ball-burnishing effect on deep residual stress on AISI 1038 and AA2017-T4

Ball-burnishing induces compressive residual stresses on treated materials by the effect of plastic deformation. The result is an increase in the fatigue life of the treated part, retarding the initiation of cracks on the surface. Compressive residual stresses have been previously measured by X-ray diffraction near the surface, revealing considerably high values at the maximum analyzed depth, in relation to other finishing processes such as shot peening. However, the maximum analyzed depth is very limited by using this technique. In this paper, the incremental hole drilling (IHD) technique is tested to measure residual stresses, being able to reach a 2-mm measuring depth. To that objective, a commercial strain gage is used and calibrated using finite element model simulations. A second Finite Element Model based on material removal rate is developed to obtain the equations to calculate the strain release through IHD. Finally, residual stresses are measured experimentally with that technique on two different materials, confirming that ball-burnishing increases the compressive residual stresses in layers up to 0.5?mm deep for the testing conditions, which is a good response to industrial needs. The method proves to be suitable, simple and inexpensive way to measure the value of these tensions.     

Optimization of drilling resistance measurement (DRM) user-controlled variables

Drilling resistance measurement (DRM) is recognised as an important on-site micro-invasive procedure for assessment of construction materials. This paper presents a detailed investigation of user-controlled variables and their influence on drilling resistance. The study proves that the ratio of penetration rate/rotational speed is proportional to drilling resistance. Data from Bath stone and an artificial reference stone demonstrates how different materials can be compared using their intrinsic specific energy. It is also shown that adjusting drilling settings does not significantly change drilling measurement variability. However, settings producing high drilling resistance can significantly contribute to drill bit wear. A theoretical framework in which tests can be optimised without compromising the ability to compare data is presented. The framework is of high significance to the conservation industry and will promote a more effective use of DRM. DRM is a minimally invasive procedure particularly appropriate for sensitive heritage structures. Its use can provide the essential mechanical property data required for evaluation of surface consolidation products and specification of repair materials.     

Monitoring the Ratio of Two Normal Variables Using EWMA Type Control Charts

In many fields, there is the need to monitor quality characteristics defined as the ratio of two random variables. The design and implementation of control charts directly monitoring the ratio stability is required for the continuous surveillance of these quality characteristics. In this paper, we propose two one‐sided exponentially weighted moving average (EWMA) charts with subgroups having sample size n > 1 to monitor the ratio of two normal random variables. The optimal EWMA smoothing constants, control limits, and ARLs have been computed for different values of the in‐control ratio and correlation between the variables and are shown in several figures and tables to discuss the statistical performance of the proposed one‐sided EWMA charts. Both deterministic and random shift sizes have been considered to test the two one‐sided EWMA charts' sensitivity. The obtained results show that the proposed one‐sided EWMA control charts are more sensitive to process shifts than other charts already proposed in the literature. The practical application of the proposed control schemes is discussed with an illustrative example. Copyright © 2015 John Wiley & Sons, Ltd.     

Nanostructured Materials for Room‐Temperature Gas Sensors

Sensor technology has an important effect on many aspects in our society, and has gained much progress, propelled by the development of nanoscience and nanotechnology. Current research efforts are directed toward developing high‐performance gas sensors with low operating temperature at low fabrication costs. A gas sensor working at room temperature is very appealing as it provides very low power consumption and does not require a heater for high‐temperature operation, and hence simplifies the fabrication of sensor devices and reduces the operating cost. Nanostructured materials are at the core of the development of any room‐temperature sensing platform. The most important advances with regard to fundamental research, sensing mechanisms, and application of nanostructured materials for room‐temperature conductometric sensor devices are reviewed here. Particular emphasis is given to the relation between the nanostructure and sensor properties in an attempt to address structure–property correlations. Finally, some future research perspectives and new challenges that the field of room‐temperature sensors will have to address are also discussed.     

Dynamics and self-assembly of bio-functionalized gold nanoparticles in solution: Reactive molecular dynamics simulations

The self-assembling properties, stability, and dynamics of hybrid nanocarriers (gold nanoparticles (AuNPs) functionalized with cysteine-based peptides) in solution are studied through a series of classical molecular dynamics simulations based on a recently parametrized reactive force field. The results reveal, at the atomic level, all the details regarding the peptide adsorption mechanisms, nanoparticle stabilization, aggregation, and sintering. The data confirm and explain the experimental findings and disclose aspects that cannot be scrutinized by experiments. The biomolecules are both chemisorbed and physisorbed; self-interactions of the adsorbates and formation of stable networks of interconnected molecules on the AuNP surfaces limit substrate reconstructions, protect the AuNPs from the action of the solvent, and prevent direct interactions of the gold surfaces. The possibility of agglomeration of the functionalized nanoparticles, compared with the sintering of the bare supports in a water solution, is demonstrated through relatively long simulations and fast steered dynamics. The analysis of the trajectories reveals that the AuNPs were well stabilized by the peptides. This prevented particle sintering and kept the particles far apart; however, part of their chains could form interconnections (crosslinks) between neighboring gold vehicles. The excellent agreement of these results with the literature confirm the reliability of the method and its potential application to the modeling of more complex materials relevant to the biomedical sector.

Open image in new window

     

Chemiotropic behavior of female olive fly (Bactrocera oleae GMEL.) onOlea europaea L

An interpretation is given of a number of observations on the chemiotropic behavior ofBactrocera oleae in connection with olive maceration water and the fly's return to the olive groves after the first summer rains. To this end, the headspace of both maceration water and leaf leaching water, simulating rainfall, were examined. In both cases, the presence of ammonia, which is generally known to attract fruit flies (Diptera, Tephritidae), was detected and, for the first time, in addition to other compounds that are inert for the fly, the presence of styrene was also detected. This aromatic hydrocarbon was found to be a strong attractant. It is shown that both ammonia and styrene are products of the metabolism of microbial flora present on the olive and leaf surface.     

In vivo characterization of renal auto-antigens involved in human auto-immune diseases: the case of membranous glomerulonephritis

Renal auto-immune diseases represent a major source of morbidity in humans. For many years the knowledge on mechanisms of auto-immunity involving the kidney has been uniquely based on animal models. However, these findings often could not be readily translated to humans owing to notably difference in antigen expression by human podocytes. One example is Heymann nephritis (HN), the experimental model of human membranous glomerulonephritis (MGN), which is obtained in rats by injecting antibodies against megalin, a protein that is not present in human glomeruli. Human studies could not be done in the past since sequencing required too much material exceeding what obtainable from tissue biopsies in vivo. Research is now on the way to identify auto-antigens and isolate specific auto-antibodies in humans. New technology developments based on tissue microdissection and proteomical analysis have facilitated the recent discoveries, allowing direct analysis of human tissue in vivo. Major advances on the pathogenesis of MGN, the prototype for the formation and glomerular deposition of auto-antibodies, are now in progress. Two independent groups have, in fact, demonstrated the existence of specific IgG(4) against phospholipase A2 receptor, aldose reductase and Mn-superoxide dismutase in glomerular eluates and in plasma of a prominent part of patients with MGN, suggesting a major role of these proteins as auto-antigens in human MGN. This review will focalize these aspects outlining the contribution of proteomics in most recent developments.