Gemeinsame österreichisch-ungarische Sedimentforschung im Rahmen des EFRE-Projektes SEDDON

The multiple uses of the Danube River for navigation, hydropower production and as a drinking water supply influence its ecological quality. Flow restrictions due to regulation as well as impacts on the sediment regime such as retention in the catchment area and interruption of the sediment continuum result in changes of the hydromorphological structures and can produce major problems in the context of sediment management. In light of these facts, cross-border investigations of sediment transport at the Danube River are called for. As there are no uniform research approaches shared by Austria and Hungary, the EU-funded project SEDDON (Sediment Research and Management at the Danube River) aims to compare different monitoring and modeling techniques used to determine sediment transport, and to develop mutual solutions. Further, the laboratory equipment currently used for hydraulic model experiments is evaluated and a research channel with a free flowing discharge of up to 10 m³/s without pumping will be constructed, allowing large-scale joint laboratory tests concerning sediment to be performed.     

A flexible multi criteria information filtering model

In this paper, a flexible multi criteria information filtering model is presented. This model is flexible since it allows choosing several distinct criteria, such as content aboutness, coverage, novelty, trust, timeliness, and combining them by a soft aggregation to define a personalized filter. The personal filter is encoded into the user profile that also contains the representations of the user interests that can evolve over time. An implementation of the system applying a combination of the aboutness and coverage criteria has been evaluated and compared to other filtering systems, showing its superior effectiveness. Finally, the possible use of the other criterion is discussed.     

Development and Validation of Europium-Sensitized Luminescence (ESL) Method for the Determination of Tetracycline Residues in Milk

The development of a fast and reliable screening method for the determination of tetracycline residues in milk is described and compared to high-performance liquid chromatography. The method is based on europium-sensitized luminescence: The emissive properties of the lanthanide cation are used as a fingerprint of europium (III) complexation with tetracycline. The optimization of the extraction and purification procedures provided a simple and convenient route to prepare stable tetracycline samples that can safely resist freezing cycles. The method is validated for the first time in milk matrix: The results show that accuracy and precision of the method meet complaints with the criteria of the Commission Decision 2002/657/EC. The proposed method has a false compliant rate (β error) lower than 5%.     

Control of grain size and -orientation in multi-crystalline silicon ingots

Two different cooling rates have been imposed during the early solidification of two multi-crystalline silicon ingots with 250mm diameter and 100mm height in a pilot scale directional solidification furnace. This has been done by opening a variable heat leak system below the crucible in order to achieve a high initial cooling rate in one of the ingots. The grain-structure and -orientation of these two ingots have been investigated by light microscopy (LM) and electron backscattered diffraction (EBSD), and their electrical properties by quasi-steady state photo-conductance (QSSPC) and surface photovoltage (SPV) method. The ingot with the high initial cooling rate shows predominantly grains which are significantly larger than what is usually found in mc-Si. The minority carrier diffusion lengths measured on the large grains in the ingot with high cooling rate show higher values than those measured on the ingot with smaller grains. These results indicate that principles of grain size and -orientation control in mc-Si ingots can be applied to a pilot scale furnace, and the potential for up-scaling to industrial ingots with improved electrical properties and, thus, higher solar cell conversion efficiency.     

Sol–Gel Processing and Characterization of Pure and Metal-Doped SnO2 Thin Films

A chloride-based inorganic sol–gel route was used for preparing pure and metal (osmium, nickel, palladium, platinum)-doped SnO₂ sol. SnCl₄ was first reacted with propanol, then the resulting compound was hydrolyzed and subsequently mixed with solutions of the metal dopants. The obtained sols were used for depositing thin films by spin coating or for preparing powders by solvent evaporation at 110°C. FTIR spectroscopy and thermal analysis of the powders revealed that chlorine still bound to tin stabilized the sol against gelation by hindering the condensation reactions. Film characterizations showed that platinum and palladium, unlike nickel and osmium, were likely to form nanoparticles in the SnO₂ lattice. This result was discussed with regard to the different ways that platinum and palladium, on one hand, and nickel and osmium, on the other, modified the growth of SnO₂ grains and the film roughness and morphology. Dopants that formed nanoparticles (platinum, palladium) resulted in the roughest film, while dopants that did not form particles (nickel, osmium) resulted in SnO₂ grain size very close to that of pure SnO₂.     

Thermodynamic and Kinetic Behavior of B and Na Through the Contact of B-Doped Silicon with Na2O-SiO2 Slags

Boron (B) is the most problematic impurity to be removed in the processes applied for the production of solar grade silicon. Boron removal from liquid silicon by sodium-silicate slags is experimentally studied and it is indicated that B can be rapidly removed within short reaction times. The B removal rate is higher at higher temperatures and higher Na₂O concentrations in the slag. Based on the experimental results and thermodynamic calculations, it is proposed that B removal from silicon phase takes place through its oxidation at the slag/Si interfacial area by Na₂O and that the oxidized B is further gasified from the slag through the formation of sodium metaborate (Na₂B₂O₄) at the slag/gas interfacial area. The overall rate of B removal is mainly controlled by these two chemical reactions. However, it is further proposed that the B removal rate from silicon depends on the mass transport of Na in the system. Sodium is transferred from slag to the molten silicon through the silicothermic reduction of Na₂O at the slag/Si interface and it simultaneously evaporates at the Si/gas interfacial area. This causes a Na concentration rise in silicon and its further decline after reaching a maximum. A major part of the Na loss from the slag is due to its carbothermic reduction and formation of Na gas.     

Laguerre-Gauss and Bessel-Gauss beams in uniaxial crystals

A simple correspondence between the paraxial propagation formulas along the optical axis of a uniaxial crystal and inside an isotropic medium is found in the case of beams with linearly polarized circularly symmetric boundary distributions. The electric fields of the ordinary and the extraordinary beams are related to the corresponding expressions in a medium with refractive index n(o) and n(e)2/n(o), where n(o) and n(e) are the ordinary and the extraordinary refractive indexes, respectively. Closed-form expressions for Laguerre-Gauss and Bessel-Gauss beams propagating through an anisotropic crystal are given.