Design and characterization of the balloon-borne Michelson Interferometer for Passive Atmospheric Sounding (MIPAS-B2)

MIPAS-B2 is a balloon-borne limb-emission sounder for atmospheric research. The heart of the instrument is a Fourier spectrometer that covers the mid-infrared spectral range (4-14 microns) and operates at cryogenic temperatures. Essential for this application is the sophisticated line-of-sight stabilization system, which is based on an inertial navigation system and is supplemented with an additional star reference system. The major scientific benefit of the instrument is the simultaneous detection of complete trace gas families in the stratosphere without restrictions concerning the time of day and viewing directions. The specifications, the design considerations, the actual realization of the instrument, and the results of characterization measurements that have been performed are described.     

Resonance and nonresonant laser ionization of sputtered uranium atoms from thin films and single microparticles: evaluation of a combined system for particle trace analysis

The resonance and nonresonant laser ionization of uranium atoms sputtered from thin metal films and individual micrometer-size uranium oxide particles, respectively, was studied to evaluate a new setup for the analysis of actinide-containing micrometer-size particles. Experiments using nonresonant (193-nm) ionization of atoms and molecules sputtered from micrometer-size uranium oxide particles have shown that the uranium detection efficiencies for sputtered neutral atoms are approximately 2 orders of magnitude higher than for secondary ions. In uranium particles of 0.5-microm diameter, 6 x 10(6) atoms of 235U were easily detected and the isotopic ratio of 235U/238U = 0.0048 +/- 4.6% is in excellent agreement with the certified value. The use of two-color, two-step resonance ionization of the sputtered neutral uranium atoms from thin films was investigated. Several excitation schemes were tested, and a significant population of several low-lying metastable states after ion sputtering was observed. Autoionizing states for double-resonant ionization were determined, and the high selectivity of ionization schemes involving these autoionizing states was illustrated by comparing the flight-time distributions of different sputtered species obtained both by resonance and nonresonant multiphoton (355-nm) laser postionization. Ideally, the options for resonance as well as nonresonant ionization would be combined in a single setup, to obtain a large gain in sensitivity and selectivity. Thus, information about the main components as well as specific isotopic information of a trace element could be obtained from the same single particle.     

Investigation of cross-coupling in 1-3 piezocomposite arrays

Plate waves inside the piezoelectric layer are much involved in the element cross-coupling in transducer arrays for medical imaging. In this work, such waves are analyzed in 1-3 piezocomposite materials on the basis of conventional guided modes formalism in which the piezocomposite is considered as a homogeneous medium. Cross-coupling measurements have been made on two different transducer arrays using a network analyzer and a laser interferometric probe. It is shown how the analysis in terms of symmetrical Lamb waves gives an interesting qualitative interpretation, explaining most of the cross-coupling amplitude variations with frequency. Results show that the 0th and 3rd symmetrical Lamb waves are mainly involved in coupling inside composite plates. The S₀ mode is responsible for the inter-element coupling, whereas the S₃ mode widens the effective width of the excited element     

Mid-infrared w quantum-well lasers for noncryogenic continuous-wave operation

We review the recent progress of electrically injected and optically pumped mid-IR lasers based on antimonide quantum wells with the type II W configuration. W quantum-well diodes have achieved cw operation up to 195 K at lambda = 3.25 mum. Optically pumped devices that employ the diamond pressure bond heat sink have reached 290 K at 3 mum and 210 K at 6 mum. Pulsed power conversion efficiencies of up to 7% at 220 K have been attained by use of an optical pumping injection cavity approach, in which an etalon cavity for the pump beam significantly enhances its absorptance. The angled-grating distributed-feedback configuration has been used to obtain near-diffraction-limited output for an optical pumping stripe width of 50 mum.     

Das Fachinformationssystem Hydrogeologie im Umweltinformationssystem Sachsen – Stand und praktische Anwendung

The branch information system “Hydrogeology” is part of the environmental information system of the federal state Saxony/Germany. The system comprises the decentral and the central data collection, central data storage and management as well as methods for data processing. As yet, data stocks and software were implemented particularly for point related data including applications for data collection, for the interpretation of pumping tests and grain size analysis as well as visualization. Maps are based on the implemented software applications and database structures. These data are an essential help in decisive processes for administrative objectives with a hydrogeologial and environmental background. Databases and methods for area-related data have been built up and already used for generation of maps.     

Flexibility performance: Taguchi's method study of physical system and operating control parameters of FMS

In present manufacturing environment, the manufacturing flexibility has become one of the strategic competitive tools. Flexibility refers to the availability of alternative resources. These resources may have varied parameters, particularly related to physical and operating system. These physical and operating parameters of alternative resources may influence the system's performance with the changing levels of flexibility and operational control parameters such as scheduling rules. Is increase in a flexibility level provides desired improved performance output? If yes, than under what conditions of physical and operating parameters and under which control strategy (CS)? Is improved performance is present at all increasing levels of flexibility? Flexible manufacturing system (FMS) being consist of numerous physical and operating parameters and complex in nature, the solution to these questions can provide an understanding of the productive levels of flexibility for a given physical and operating parameters of an FMS. This paper establishes the need of modelling of the physical and operating parameters of flexible manufacturing system along with flexibility and presents a simulation study under Taguchi's method analysis of these parameters. The paper contributes an approach to study the impact of variations in physical and operating parameters of an FMS and to identify the level of these variations that do not restrict the advantages of flexibility. The results show that the expected benefits from increasing the levels of flexibility and a superior CS may not be achieved if the physical and operating parameters of alternative machines have variations. Taguchi's method analysis indicates that relative percentage contribution of variations in physical and operating parameters of alternative resources should be negligible or minimum in the performance of FMS. Their increasing relative contribution may restrict the advantages of flexibility. If these variations are higher than increase in flexibility level may be counter productive.     

Monolithically Fabricated Microgripper With Integrated Force Sensor for Manipulating Microobjects and Biological Cells Aligned in an Ultrasonic Field

This paper reports an electrostatic microelectromechanical systems (MEMS) gripper with an integrated capacitive force sensor. The sensitivity is more than three orders of magnitude higher than other monolithically fabricated MEMS grippers with force feedback. This force sensing resolution provides feedback in the range of the forces that dominate the micromanipulation process. A MEMS ultrasonic device is described for aligning microobjects suspended in water using ultrasonic fields. The alignment of the particles is of a sufficient accuracy that the microgripper must only return to a fixed position in order to pick up particles less than 100 mum in diameter. The concept is also demonstrated with HeLa cells, thus providing a useful tool in biological research and cell assays     

Factors contributing to IT industry success in developing countries: The case of Thailand

A stream of research exists that explores a country's information technology (IT) industry success. The theoretical model used in these studies is primarily focused on small developed countries. We contend that the factors that contribute to IT industry success in developing countries are likely to differ somewhat from those that play a role in small developed countries. Research to date on IT industry success has neglected developing countries. This study therefore presents an alternative IT industry success model for developing countries. It adapts Ein-dor, Myers, and Raman's (1997) model in developing such a conceptual model. The adapted framework is then applied in a study of IT industry in a developing country—Thailand. We found IT-related foreign direct investment to be vital to IT industry success in Thailand. Unlike findings from earlier studies on small developed countries, geographical location and to a lesser extent government investment promotion policies are also important to IT industry success in a developing country. These findings support the view that there are differences in the factors that affect IT industry success in developed and developing countries. Implications for research and practice are discussed. © 2005 Wiley Periodicals, Inc.     

Suomi NPP/VIIRS: improving drought watch,crop loss prediction,and food security

Since 1990, the role of satellite observations for climate and land services increased considerably, especially with the introduction in 2011 of the new generation of NOAA operational satellites, called Suomi NPOSS Polar-Orbiting Partnership (S-NPP). S-NPP will continue as the Joint Polar Satellite System (JPSS) for the next two decades. The Visible Infrared Imaging Radiometer Suite (VIIRS) on the S-NPP spacecraft is accommodating the best technical and scientific features of its predecessors and has several new important features. S-NPP and JPSS, in addition to data collection, will address the impacts of climate and weather on industries, water, energy, population health, and other resources and activities. This article discusses how these operational satellites improve early drought detection, monitoring its features (intensity, duration, area, etc.) and prediction of agricultural losses; how fast the Earth’s natural resources deteriorate; and whether the current warm climate intensifies droughts and increases its area and duration. These climate services have already become available to the global community (http://www.star.nesdis.noaa.gov/smcd/emb/vci/VH/index.php). The S-NPP/VIIRS data permits its users to enhance long-term environmental data records, thereby improving the ability to estimate global warming, land-cover changes, and better monitoring of environmental resources.     

VIIRS-based high resolution spectral vegetation indices for quantitative assessment of vegetation health: second version

ABSTRACT

Two approaches could be utilized to derive the vegetation health indices from recently launched Visible Infrared Imaging Radiometer Suite (VIIRS) sensor with the goal to maintain the consistency with the long-term Advanced Very High Resolution Radiometer (AVHRR) vegetation health products. One approach is to convert VIIRS Normalized Difference Vegetation Index (NDVI)/brightness temperature (BT) to AVHRR, as the first version. The other is to derive long-term pixel-based VIIRS climatology without converting at NDVI/BT level. The second version of products, derived from the new VIIRS pseudo long-term climatology as presented in this article, can trace the signature of the long-term AVHRR vegetation health products quite well, in terms of histogram, correlation coefficients, time series, and so on. The extended products with higher resolutions also perform as expected, indicating that the constructed long-term high-resolution climatology is reasonable. The third version of the products, based on VIIRS real long-term climatology, still needs many years to develop.