The effect of pre-warming on performance during simulated firefighting exercise

This study examined the effect of active pre-warming on speed and quality of performance during simulated firefighting exercise. Twelve male firefighters performed two trials in counterbalanced order. They were either pre-warmed by 20-min cycling at 1.5 Watt kg⁻¹ body mass (WARM) or remained thermoneutral (CON) prior to a simulated firefighting activity. After the pre-warming, gastrointestinal temperature (P < 0.001), skin temperature (P = 0.002), and heart rate (P < 0.001) were higher in WARM than in CON. During the firefighting activity, rating of perceived exertion, thermal sensation and discomfort were higher for WARM than for CON. Finish time of the firefighting activity was similar, but the last task of the activity was completed slower in WARM than in CON (P = 0.04). In WARM, self-reported performance quality was lower than in CON (P = 0.04). It is concluded that pre-warming reduces the speed during the last part of simulated firefighting activity and reduces self-reported quality of performance.     

Target following with motion prediction for unmanned surface vehicle operating in cluttered environments

The capability of following a moving target in an environment with obstacles is required as a basic and necessary function for realizing an autonomous unmanned surface vehicle (USV). Many target following scenarios involve a follower and target vehicles that may have different maneuvering capabilities. Moreover, the follower vehicle may not have prior information about the intended motion of the target boat. This paper presents a trajectory planning and tracking approach for following a differentially constrained target vehicle operating in an obstacle field. The developed approach includes a novel algorithm for computing a desired pose and surge speed in the vicinity of the target boat, jointly defined as a motion goal, and tightly integrates it with trajectory planning and tracking components of the entire system. The trajectory planner generates a dynamically feasible, collision-free trajectory to allow the USV to safely reach the computed motion goal. Trajectory planning needs to be sufficiently fast and yet produce dynamically feasible and short trajectories due to the moving target. This required speeding up the planning by searching for trajectories through a hybrid, pose-position state space using a multi-resolution control action set. The search in the velocity space is decoupled from the search for a trajectory in the pose space. Therefore, the underlying trajectory tracking controller computes desired surge speed for each segment of the trajectory and ensures that the USV maintains it. We have carried out simulation as well as experimental studies to demonstrate the effectiveness of the developed approach.     

Geschäftsmodelle

The business model concept, although a relatively new topic for research, has garnered growing attention over the past decade. Whilst it has been robustly defined, the concept has so far attracted very little substantive research. In the context of the wide-spread digitization of businesses and society at large, the logic inherent in a business model has become critical for business success and, hence, a focus for academic inquiry. The business model concept is identified as the missing link between business strategy, processes, and Information Technology (IT). The authors argue that the BISE community offers distinct and unique competencies (e.g., translating business strategies into IT systems, managing business and IT processes, etc.) that can be harnessed for significant research contributions to this field. Within this research gap three distinct streams are delineated, namely, business models in IT industries, IT enabled or digital business models, and IT support for developing and managing business models. For these streams, the current state of the art, suggest critical research questions, and suitable research methodologies are outlined.     

Amphiphilic segmented polymer networks based on poly(2-alkyl-2-oxazoline) and poly(methyl methacrylate)

Amphiphilic segmented polymer networks (SPNs) have been prepared by free radical copolymerization of methyl methacrylate with α,ω-bisacrylate terminated poly(2-methyl-2-oxazoline) and poly(2-ethyl-2-oxazoline). DSC and DMTA analysis demonstrated the influence of the copolymer composition, the molecular weight and nature of the poly(2-alkyl-2-oxazoline)s and the polymerization conditions on the final phase morphology of the networks. A comparative phase morphology study of the polymer blends and SPNs revealed the more compatible phase morphology of the networks. The compatibility could be further increased by UV-induced network formation. The investigation of the solvent uptake in different solvents clearly demonstrated the amphiphilic nature of the SPNs.     

CLATHRATE HYDRATE FORMATION ENHANCES NEAR-CRITICAL AND SUPERCRITICAL SOLVENT EXTRACTION EQUILIBRIA

Pre-concentration of dilute aqueous solutions by hydrate formation can improve the effective distribution coefficient and selectivity of solvent extraction. Many solvents can serve simultaneously to promote solution concentration by hydrate formation and also to extract non-polar solutes from the resulting concentrated solution. This concept is illustrated for systems with supercritical ethylene and with near-critical liquid carbon dioxide, and its application to conventional solvents is discussed.     

Structural–Property Relations in a Reduced and Internally Biased Oxide Wafer (RAINBOW) Actuator Material

Reduced and internally biased oxide wafer (RAINBOW) actuators are fabricated by a controlled reduction of Pb(Zr, Ti)O₃-based piezoelectric material. The reduction process results in a conductive layer composed of an interconnected metallic lead phase and refractory oxides (ZrTiO₄, ZrO₂, La₂O₃, etc.). The nature of the reduction is discovered to be the result of a complex volume change leading to a nanoscale interconnected metallic structure. The distribution of phases within the cermet vary within the thickness of the wafer. Within the piezoelectric ceramic phase, the reduction process modifies the grain-boundary structure to give two distinct types of fracture: transgranular and intergranular. The complexed microstructures of the RAINBOW actuator materials are discussed in relation to their dielectric and piezoelectric properties.     

Ultrasonic Dispersion of Ceramic Powders

Ultrasonication is very effective in dispersing alumina and barium titanate slurries. When optimum conditions are used, very short durations (2 to 3 min) are enough to achieve well-dispersed, stable suspensions.     

Vapor barrier properties of polycaprolactone montmorillonite nanocomposites: effect of clay dispersion

Different compositions of poly(ε-caprolactone) (PCL) and (organo-modified) montmorillonite were prepared by melt blending or catalyzed ring opening polymerization of ε-caprolactone. Microphase composites were obtained by direct melt blending of PCL and sodium montmorillonite (MMT-Na⁺). Exfoliated nanocomposites were obtained by in situ ring opening polymerization of ε-caprolactone with an organo-modified montmorillonite (MMT-(OH)₂) by using dibutyltin dimethoxide as an initiator/catalyst. Intercalated nanocomposites were formed either by melt blending with organo-modified montmorillonite or in situ polymerization within sodium montmorillonite. The barrier properties were studied for water vapor and dichloromethane as an organic solvent. The sorption (S) and the zero concentration diffusion coefficient (D₀) were evaluated for both vapors. The water sorption increases with increasing the MMT content, particularly for the microcomposites containing the unmodified MMT-Na⁺. The thermodynamic diffusion parameters, D₀, were compared to the value of the parent PCL: both microcomposites and intercalated nanocomposites show diffusion parameters very near to PCL. At variance exfoliated nanocomposites show much lower values, even for small montmorillonite content. In the case of the organic vapor, the value of sorption at low relative pressure is mainly dominated by the amorphous fraction present in the samples, not showing any preferential adsorption on the inorganic component. At high relative pressure the isotherms showed an exponential increase of sorption, due to plasticization of the polyester matrix. The D₀ parameters were also compared to those of the unfilled PCL; in this case, both the exfoliated and the intercalated samples showed lower values, due to a more tortuous path for the penetrant molecules.     

Structure and conductivity of multi-walled carbon nanotube/poly(3-hexylthiophene) composite films

This work reports a structure-property investigation of a conjugated polymer nanocomposite with enhanced conductivity. Regioregular poly(3-hexylthiophene) (rrP3HT) was used to prepare composites with thin, short, multi-walled carbon nanotube (MWNT) addition over a wide range of concentrations. Scanning and transmission electron microscopies demonstrated an excellent dispersion and good wetting properties within the carbon nanotube composites. Coated MWNTs showed superstructures of P3HT self-organized on nanotube surfaces. Changes in the long range order and on the self-ordered mesophase of the bulk material were investigated by infrared and Raman spectroscopies, differential scanning calorimetry and X-ray diffraction. Interplay between charge transport through the semiconducting polymer and carbon nanotube network increased the composite's conductivity after percolation to values close to 10⁻² S cm⁻¹.     

15 years of processing and dissemination of SPOT-VEGETATION products

Throughout the VEGETATION programme, the Flemish Institute for Technological Research (VITO) uninterruptedly hosted the prime user segment of both VEGETATION 1 and VEGETATION 2 multispectral instruments on board the Satellite Pour l’Observation de la Terre 4 (SPOT 4) and SPOT 5 satellites. Operational since the launch of SPOT 4 in March 1998, and foreseen to continue at least until the end of the SPOT 5 mission (anticipated in spring 2014), this user segment comprises a processing facility (PF), actively receiving, processing, correcting, archiving, and distributing the VEGETATION data and derived added-value products. First and foremost, the VEGETATION programme has been serving the needs of operational users – both institutional and commercial – requesting data in near-real time. However, scientific and educational users too benefited significantly, in particular from VEGETATION’s unique time series of the Earth’s land cover, and more specifically the vegetation cover. Over the years, the centralized archive houses processed data covering the equivalent of 11,000 times the Earth’s surface, and delivered more than 50 terapixels to around 10.000 users. As such, VEGETATION’s mission is a prime example of what Europe wants to achieve through the Global Monitoring for Environment and Security (GMES) initiative: truly operational services providing reliable and up-to-date information.

This article describes the processing facility, the way the data and products are archived, the different dissemination channels as well as the data policy adopted and the users served. One of the recent evolutions, the development of an entirely new product distribution facility (PDF), implemented as part of the Project for On-Board Autonomy – Vegetation (PROBA-V) user segment is discussed.