Performance evaluation of a biotrickling filter degrading mixtures of hydrophobic and hydrophilic compounds

The removal of a mixture of painting solvents from waste air using a biofiltration process was evaluated in this project. The pollutants removed included hydrophobic (aromatic hydrocarbons) and hydrophilic (water soluble ketones and esters) compounds. A trickle bed reactor with a defined immobilized mixed culture on polyethylene Pall rings was utilized in this biodegradation study. The removal efficiencies (RE) of the individual groups of pollutants during loading experiments were determined. An increase of the aromatic hydrocarbons loading resulted in a drop of their RE_AROM with no effect on the RE value of ketones. The overloading of ketones caused a rapid drop in RE_AROM and a small drop in RE_KET. To achieve a restoration of the biocatalyst degradation properties after the increase in loading, an addition of phosphate to the aqueous medium was implemented which successfully restored the removal efficiency.     

Effect of Floodwater Extraction on Mountain Stream Morphology

Floodwater is often extracted for consumptive purposes from western mountain streams in the United States. The long-term extraction of floodwater may alter the morphological and ecological balance of such streams. Scale model experiments based on eight mountain gravel-bed streams in Idaho were conducted to test the effects of floodwater extraction on stream morphology. The model channel transported a poorly sorted mix of model “gravel,” as well as copious amounts of model “sand.” The channel had a discontinuous floodplain, developed its own bar morphology, and contained large model colluvium as well as a bedrock platform. A mobile-bed equilibrium was first developed using a repeated hydrograph. The experiment was then repeated using a sliding cutoff discharge. The discharges in the hydrograph that were below a given cutoff discharge were reduced to 30% of bankfull discharge. By raising the cutoff discharge, it was possible to study the effect of increasing severity of floodwater extraction on stream morphology. The experiments indicated an increase in sand content on the bed surface and a decrease in the standard deviation of fluctuations in bed elevation with increasing severity of floodwater extraction.     

Nodally exact Ritz discretizations of 1D diffusion–absorption and Helmholtz equations by variational FIC and modified equation methods

This article presents the first application of the Finite Calculus (FIC) in a Ritz-FEM variational framework. FIC provides a steplength parametrization of mesh dimensions, which is used to modify the shape functions. This approach is applied to the FEM discretization of the steady-state, one-dimensional, diffusion–absorption and Helmholtz equations. Parametrized linear shape functions are directly inserted into a FIC functional. The resulting Ritz-FIC equations are symmetric and carry a element-level free parameter coming from the function modification process. Both constant- and variable-coefficient cases are studied. It is shown that the parameter can be used to produce nodally exact solutions for the constant coefficient case. The optimal value is found by matching the finite-order modified differential equation (FOMoDE) of the Ritz-FIC equations with the original field equation. The inclusion of the Ritz-FIC models in the context of templates is examined. This inclusion shows that there is an infinite number of nodally exact models for the constant coefficient case. The ingredients of these methods (FIC, Ritz, MoDE and templates) can be extended to multiple dimensions     

A new amperometric biosensor for fructose determination based on epoxy-graphite-TTF-TCNQ-FDH-biocomposite

In this work a novel amperometric biosensor for fructose determination in solutions was developed. The device was constructed by the incorporation of a tetrathiofulvalene-tetracyanoquinodimethane organic conducting salt and fructose dehydrogenase enzyme, include in a polymeric matrix of epoxy resin and graphite powder. Because of the electrocatalytic function of the salt, the direct transfer of the electron between the reduced prosthetic group (PQQH₂) of the enzyme and the transducing material, was verified at a low working potential (150 mV vs. Ag/AgCl), where the interfering reactions were minimized. The response time at 90% of the steady state value was less than 20 s. The current response was directly proportional to the D-fructose concentration from 0.01 to 0.3 mmol/l with a detection limit of 0.005 mmol/l (signal/noise of 3) and a sensitivity of 1.9985 μA/mmol. The biosensor sensitivity diminishes when its surface is not polished between successive determinations, and remains constant (rsd=1.85, n=10) when the surface is polished between determinations. The effects of temperature and pH on the biosensor response were studied and analyzed; also the properties of the enzyme (Km _ap, I _max, Q₁₀) were determinate in this work. The biosensor was used to determine fructose in high fructose syrups and there were not significant differences between these results and those obtained by HPLC (p≤0.05). During 4 months, in intermittent determinations the biosensor kept 100% of its original sensitivity and after 18 months stored at 4°C, it only lost 32% of its sensitivity. The simplicity, low working potential, high stability and good performance of this biosensor shows a great potential for its use in the fructose determination.     

Multi-step transformation in numerical renormalization group

We compute the temperature dependent magnetic susceptibility of the single-impurity, two-channel Anderson model with an alternative multi-step numerical renormalization-group transformation, previously applied only to the two-impurity single-channel Kondo model. Compared with the traditional transformation, the new procedure requires substantially less memory and computational time, and opens therefore perspectives for the application of the numerical renormalization-group procedure to more complex Hamiltonians.     

Estimation of thermal diffusivity of foods using transfer functions

The effective thermal diffusivity of foodstuffs was estimated from time-temperature histories in the geometric center of samples exposed to heating and cooling processes.Transfer functions methodology was used as an alternative method to estimate the thermal diffusivity assuming that conduction was the main heat transfer mechanism. The samples were characterized as delayed first-order systems with unit gain, dead time (L) and time constant (τ).The results were compared with those obtained from the f_h value and with results reported in the literature.     

"The association between emotional upset and cardiac arrhythmia during daily life": Correction to Carels et al. (2003).

Reports an error in the original article by R. A. Carels et al (Journal of Consulting & Clinical Psychology, 2003[Jun], Vol 71[3], 613-618). On page 615, Lines 18, 20, 22, of Table 1, the data in the rows that read "Tachycardia in min per hr," "Repetitive PVCs per hr," and "PVCs per hr" are incorrectly reported in the n and % columns. They should have been reported in the M and SD columns. The corrected table is provided. (The following abstract of this article originally appeared in record 2003-00756-023.) Ventricular arrhythmia exhibits considerable within-subject variability that cannot be attributed to clinical status alone. This investigation examined the extent to which cardiac arrhythmia was associated with psychological and physical factors assessed during the hour preceding arrhythmic or nonarrhythmic activity. Approximately twice hourly, 46 patients randomly completed a diary assessing mood and physical symptoms during 24-hr electrocardiographic monitoring. Greater negative emotion was associated with increased arrhythmia. Additionally, greater negative emotion was significantly associated with increased arrhythmia among participants in a low left ventricular ejection fraction group (LVEF). However, this relationship between negative emotion and arrhythmia was not... (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Fe-substituted (La,Sr)TiO3 as potential electrodes for symmetrical fuel cells (SFCs)

In the work presented herein, the potential use of La₄Sr₈Ti_12−xFe_xO_38−δ (LSTF) materials as electrodes for a new concept of solid oxide fuel cells, symmetrical fuel cells (SFCs), is considered. Such fuel cells use simultaneously the same material as anode and cathode, which notably simplifies the assembly and further maintenance of the cells. Therefore, we search for materials showing high conductivity in a wide range of oxygen partial pressures in addition to certain degree of catalytic activity for the oxidation of the fuel and reduction of the oxidant, respectively. The preliminary electrochemical experiments performed reveal that the overall conductivity increases notably upon Fe substitution, being the main contribution electronic n-type. The fuel cell tests indicate that LSTF composites with YSZ and CeO₂ perform reasonably well under H₂ conditions, although the performance in methane is rather modest and require further optimisation.     

Mapping of Trellises Associated with General Encoders onto High-Performance VLSI Architectures

A rate 1/n binary generic convolutional encoder is a shift-register circuit where the inputs are information bits and the outputs are blocks of n bits generated as linear combinations on the appropriate shift register contents. The decoding of the outputs of a convolutional encoder can be carried out by the well-known Viterbi algorithm. The communication pattern of the Viterbi Algorithm is given as a graph, called trellis, associated to the state diagram of the corresponding encoder. In this paper we present a methodology that permits the efficient mapping of the Viterbi algorithm onto a column of an arbitrary number of processors. This is done through the representation of the data flow by using mathematical operators which present an inmediate hardware projection. A single operator string has been obtained to represent a generic encoder through the study of the data flow of free-forward encoders and feed-back encoders. The formal model developed is employed for the partitioning of the computations among an arbitrary number of processors in such a way that the data are recirculated opimizing the use of the processors and the communications. As a result, we obtain a highly regular and modular architecture suitable for VLSI implementation.