某富含蛇纹石的低品位难选铜镍矿选矿工艺研究

针对某铜镍矿铜镍品位低,铜镍矿物嵌布粒度微细,共生关系复杂,蛇纹石含量高等特征,开展了选矿工艺试验研究。试验结果表明,采用预先脱除脉石-铜镍混合浮选流程,通过对含Ni 0.51%、含Cu 0.20%、含Co 0.02%的原矿进行选择性磨矿,利用MIBC预先脱除部分易浮脉石,碳酸钠作矿浆pH调整剂,CMC作MgO脉石的抑制剂,硫酸铜和丁基黄药分别作铜镍矿物的活化剂和捕收剂,全流程浮选闭路试验获得了含Ni 7.78%、Cu 2.91%、Co 0.24%,回收率分别为Ni 72.98%、Cu 66.57%、Co 51.29%的铜镍混合精矿。该工艺流程获得了较好的选别效果,实现了铜、镍、钴的有效回收。     

The corrosion behavior and mechanism of X65 steel induced by iron‐oxidizing bacteria in the seawater environment

The corrosion behavior and mechanism of iron‐oxidizing bacteria (IOB) on X65 steel in seawater are studied. This study uses the methods of weight loss, electrochemical measurements, and surface analysis. The results show that the IOB increases the corrosion damage degree of steel. Pittings are observed in the medium with IOB. The potentiodynamic polarization curves show that the anodic reaction rate is accelerated in the corrosion process of IOB. The synergies in corrosion between the metal surface, abiotic corrosion products, and bacterial cells, and the pitting corrosion mechanism of X65 steel are discussed.     

The isothermal reduction kinetics of chromium-bearing vanadium–titanium magnetite sinter

The reduction of chromium-bearing vanadium–titanium magnetite sinter (CVTMS) by CO was investigated at 1123–1223?K. The reduction degree increased with increasing temperature. The isothermal reduction kinetics of CVTMS was analysed, according to Sharp analysis and ln–ln analysis, the kinetic mechanism of reduction process for all samples in different basicity can be represented as f(α)?=?1.61(1?α)[?ln(1?α)]^1–1/1.61. The reaction activation energy of all samples (R?=?1.9, 2.1, 2.3, obtained according to the components of the materials burdening used in sintering process) at different reaction degrees were calculated by the model-free method. And the pre-exponential factors of reaction also were calculated by the mathematical method. The rate controlling step for the reduction process under the present reduction condition was chemical reaction.     

Pharmacokinetics and efficiency of brain targeting of ginsenosides Rg1 and Rb1 given as Nao-Qing microemulsion

Nao-Qing solution has been shown to be clinically effective in the treatment of acute ischemic stroke (AIS). The purpose of this study was to improve the pharmacokinetics and brain uptake of Nao-Qing, administered as an oil-in-water microemulsion. Sprague–Dawley (SD) rats were given Nao-Qing microemulsion by intranasal or intragastric routes. Samples of blood, brain, heart, liver, lung and kidney were collected at pre-determined time intervals, and the contents of ginsenosides Rg1 and Rb1 (active ingredients of the Nao-Qing microemulsion) were analyzed by high-performance liquid chromatography (HPLC). The results showed that contents of ginsenosides Rg1 and Rb1 in Nao-Qing microemulsion was 8475.13?±?54.61?μg/ml and 6633.42?±?527.27?μg/ml, respectively, and that the particle size, pH and viscosity of the microemulsion were 19.9?±?5.07?nm, 6.1 and 3.056?×?10^?3?Pas, respectively. Absorption of ginsenoside Rg1 was higher than that of ginsenoside Rb1, which was barely detectable after intragastric administration; furthermore, the concentration of ginsenoside Rg1 in blood and other tissues at each time point was lower for intragastric than for intranasal administration. Compared with intragastric administration, intranasal administration resulted in a shorter t_max (0.08 versus 1?h), a higher C_max (16.65 versus 11.29?μg/ml), and a higher area under the concentration–time curve (AUC) (592.91 versus 101.70?μg?h/ml) in the brain. The relative rates of uptake (R_e) and the ratio of peak concentration (C_e) in the brain were 126.31% and 147.48% for ginsenoside Rg1, respectively. These data illustrate that intranasal administration can promote the absorption of drugs in Nao-Qing microemulsion and achieve fast effect.     

Improved thermal stability of the near-infrared Al-modulated Zn3Ga2GeO8: Cr3+ phosphors for plant growth applications

The exploration of the high thermal stability near-infrared (NIR) phosphors is significantly crucial for the development of plant lighting. However, NIR phosphors suffer from the poor chemical and thermal stability, which severely limits their long-term operation. Here, the successful improvement of luminous intensity (149.5%) and thermal stability at 423 K of Zn₃Ga₂GeO₈ (ZGGO): Cr³⁺ phosphors is achieved for the introduction of Al³⁺ ions into the host. The release of carriers in deep traps inhibits the emission loss for the thermal disturbance. Furthermore, an NIR light emitting diodes (LEDs) lamp is explored by combining the optimized Zn₃Ga_1.1675Al_0.8GeO₈: 0.0325Cr³⁺ phosphors with a commercial 460 nm blue chip, and the emission band can match well with the absorption bands of photosynthetic pigments and the phytochrome (P_R and P_FR) of plants. The explored LEDs lamp further determines the growth and the pheromone content of the involved plants for the participation of the NIR emission originated from Cr³⁺ ions. Our work provides a promising NIR lamp as plant light with improved thermal stability for long-term operation.     

Fluidization Characteristics of Air Dense Medium Agitated Separation Fluidized Bed with Different Distributors

ABSTRACT

The distribution plate structure plays an important role in the stability of air dense medium fluidized beds (ADMFB). Optimization of the distribution plate structure can reduce the generation of large bubbles. In the present work, the influence of the distribution plate structure on the fluidization characteristics of fluidized bed with agitator was investigated. Two different feedstock samples with the size fraction of 25–13 and 13–6 mm were tested individually. The experimental results showed that the fluidized bed density fluctuation was relatively small and the dead zone of gas-solids fluidized bed was significantly reduced by adding the stirring device into the fluidized bed under the optimal working conditions. Through a study of the sorting test, it was revealed that the separation performance can be effectively improved. This indicates that there is an obvious interrelationship between the structure of distribution plate and other process parameters, which affects the fluidization characteristics of ADMFB.     

Ultranarrow Bandwidth Organic Photodiodes by Exchange Narrowing in Merocyanine H‐ and J‐Aggregate Excitonic Systems

Ultranarrowband organic photodiodes (OPDs) are demonstrated for thin film solid state materials composed of tightly packed dipolar merocyanine dyes. For these dyes the packing arrangement can be controlled by the bulkiness of the donor substituent, leading to either strong H‐ or strong J‐type exciton coupling in the interesting blue (H‐aggregate) and NIR (J‐aggregate) spectral ranges. Both bands are shown to arise from one single exciton band according to fluorescence measurements and are not just a mere consequence of different polymorphs within the same thin film. By fabrication of organic thin‐film transistors, these dyes are demonstrated to exhibit hole transport behavior in spin‐coated thin films. Moreover, when used as organic photodiodes in planar heterojunctions with C₆₀ fullerene, they show wavelength‐selective photocurrents in the solid state with maximum external quantum efficiencies of up to 11% and ultranarrow bandwidths down to 30 nm. Thereby, narrowing the linewidths of optoelectronic functional materials by exciton coupling provides a powerful approach to produce ultranarrowband organic photodiodes.     

An Alternative Technique for the Extraction of Valuable Elements from Fly Ash: the Carbochlorination Method

Russian Journal of Non-Ferrous Metals - The extraction of valuable elements from high-alumina fly ash was carried out using two methods, the carbochlorination method and the carbothermic method....     

Cost Optimization of Partial Computation Offloading and Pricing in Vehicular Networks

Journal of Signal Processing Systems - For vehicles with limited computation resources offloading their computational tasks to a mobile edge computing (MEC) server has been studied in the past as...