Mechanosynthesis of the multiferroic cubic spinel Co2MnO4: Influence of the calcination temperature

Multiferroic materials showing magnetoelectric coupling are required in various technological applications. Many synthetical approaches can be used to improve the magnetic and/or electrical properties, in particular when the materials exhibit cationic valence fluctuations, as in the Co₂MnO₄ cubic spinel. In this compound, Co and Mn ions are in competition at the tetrahedral and octahedral positions, depending on their various oxidation states. The Co₂MnO₄ was prepared following two techniques: by a soft chemical route based on a modified polymer precursor method, and by a mechanoactivation route. Both approaches yield polycrystalline powders, but their crystallites sizes and particles morphologies differ as a function of the calcination conditions. The magnetic characterization (ZFC/FC cycles, ordering temperatures, ferromagnetic coercive fields and saturation magnetizations) showed that the synthesis procedure influenced the physical properties of Co₂MnO₄ mainly through the size of the magnetic domains, which play an important role on the magnetic interactions between the Co/Mn cations.     

Influence of tool shoulder geometry on properties of friction stir welds in thin copper sheets

The aim of this work is to study the influence of the shoulder geometry on friction stir welding of 1 mm-thick copper-DHP plates. The welds were produced using three different shoulder geometries, flat, conical and scrolled, and varying the rotation and traverse speeds of the tool. The flat shoulder tool proved to be inadequate for performing welds, because many defects were produced for all welding conditions. In turn, the scrolled shoulder tool is more effective than the conical one in the production of defect free welds. However, both geometries required a minimum rotational speed to avoid internal defects. For the same welding parameters, greater grain refinement, higher hardness and improved strength are also achieved in the nugget of the welds, using the scrolled tool.     

The benefits of flexible team interaction during crises.

Organizations increasingly rely on teams to respond to crises. While research on team effectiveness during nonroutine events is growing, naturalistic studies examining team behaviors during crises are relatively scarce. Furthermore, the relevant literature offers competing theoretical rationales concerning effective team response to crises. In this article, the authors investigate whether high- versus average-performing teams can be distinguished on the basis of the number and complexity of their interaction patterns. Using behavioral observation methodology, the authors coded the discrete verbal and nonverbal behaviors of 14 nuclear power plant control room crews as they responded to a simulated crisis. Pattern detection software revealed systematic differences among crews in their patterns of interaction. Mean comparisons and discriminant function analysis indicated that higher performing crews exhibited fewer, shorter, and less complex interaction patterns. These results illustrate the limitations of standardized response patterns and highlight the importance of team adaptability. Implications for future research and for team training are included. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Biomechanical properties of single chondrocytes and chondrons determined by micromanipulation and finite-element modelling

A chondrocyte and its surrounding pericellular matrix (PCM) are defined as a chondron. Single chondrocytes and chondrons isolated from bovine articular cartilage were compressed by micromanipulation between two parallel surfaces in order to investigate their biomechanical properties and to discover the mechanical significance of the PCM. The force imposed on the cells was measured directly during compression to various deformations and then holding. When the nominal strain at the end of compression was 50 per cent, force relaxation showed that the cells were viscoelastic, but this viscoelasticity was generally insignificant when the nominal strain was 30 per cent or lower. The viscoelastic behaviour might be due to the mechanical response of the cell cytoskeleton and/or nucleus at higher deformations. A finite-element analysis was applied to simulate the experimental force-displacement/time data and to obtain mechanical property parameters of the chondrocytes and chondrons. Because of the large strains in the cells, a nonlinear elastic model was used for simulations of compression to 30 per cent nominal strain and a nonlinear viscoelastic model for 50 per cent. The elastic model yielded a Young''s modulus of 14 ± 1 kPa (mean ± s.e.) for chondrocytes and 19 ± 2 kPa for chondrons, respectively. The viscoelastic model generated an instantaneous elastic modulus of 21 ± 3 and 27 ± 4 kPa, a long-term modulus of 9.3 ± 0.8 and 12 ± 1 kPa and an apparent viscosity of 2.8 ± 0.5 and 3.4 ± 0.6 kPa s for chondrocytes and chondrons, respectively. It was concluded that chondrons were generally stiffer and showed less viscoelastic behaviour than chondrocytes, and that the PCM significantly influenced the mechanical properties of the cells.     

Optimisation of rancidity stability in long‐chain PUFA concentrates obtained from a rainbow trout (Oncorhynchus mykiss) by‐product

This research was focused on the production of polyunsaturated fatty acid concentrates from a farmed rainbow trout (Oncorhynchus mykiss) by‐product (i.e. belly muscle). The effect of different process variables (urea/fatty acids (FA) contents ratio, crystallisation time and temperature and stirring speed of the urea/FA mixture) on the lipid oxidation development during the urea complexation process was investigated. For this purpose, an experimental design (26 runs) following the response‐surface methodology was developed. As a result, peroxide value and TOTOX index showed to be dependent on the crystallisation time and temperature and the urea/FA ratio, while no influence of the crystallisation stirring speed was detected on both indices; additionally, polyene index was affected by the urea/FA ratio and its interaction with the crystallisation time. An optimised desirability score near 1.0 was attained provided values of 2.8 °C, 3.05 h and 3.57 were applied for crystallisation temperature, crystallisation time and urea/FA ratio, respectively.     

Exercise training-induced changes in sensitivity to endothelin-1 and aortic and cerebellum lipid profile in rats

The purpose of this work was to study whether exercise training induces changes in the lipid profile of rat aorta and nervous system and in the in vitro intrinsic responsiveness of these tissues to endothelin-1 (ET-1) treatment. The exercise program performed successfully produced the characteristic metabolic alterations of the trained state. Exercise training induced a large and significant increase in the levels of both aortic ethanolamine plasmalogens (PlasEtn) and glucosylceramides. In contrast, a decrease of aortic ceramide and cholesterol levels was evoked by exercise training. ET-1 increased PlasEtn content only in sedentary animals. An exercise-induced increase in cerebellum levels of ceramides and ceramide monohexosides was found. The cerebellum ceramide content was increased by FT-1 more noticeably in sedentary rats than in trained animals. In contrast, cerebral cortex was observed to be largely insensitive to both exercise training and ET-1 treatment. It was concluded that exercise training (i) induces changes in both vascular and cerebellar lipid profiles, the former being much more pronounced than the latter, and (ii) diminishes the aortic and cerebellar sensitivity to ET-1 action.