Spectral interferometric microscope with tandem liquid-crystal Fabry-Perot interferometers for extension of the dynamic range in three-dimensional step-height measurement

The maximum measurable range of a spectral interference microscope depends on the coherence length of the light transmitted by its tunable spectral filter. To achieve a large range in step-height measurement we have developed a new tunable spectral filter that uses tandem liquid-crystal Fabry-Perot interferometers (LC-FPIs), which can simultaneously attain both a high spectral resolution and a large tuning range. Fringe visibility measurements were carried out, and it was found that the coherence length of the light transmitted through tandem LC-FPIs is two times larger than that transmitted through a single LC-FPI. Using this novel tunable spectral filter, we developed a new spectral interference microscope for the measurement of three-dimensional shapes of discontinuous objects. Experimental results of step-height measurements both with a single LC-FPI and with tandem LC-FPIs are presented for a combination of standard steel gauge block sets with 1-, 99-, and 100-microm steps. A large range (1-100 microm) of measurement with submicrometer resolution was achieved with tandem LC-FPIs that was not possible with our previous system in which a single LC-FPI was used.     

Spectral interference Mirau microscope with an acousto-optic tunable filter for three-dimensional surface profilometry

A nonmechanical scanning Mirau-type spectral interference microscope has been developed for the measurement of three-dimensional surface profiles of discontinuous objects. An acousto-optic tunable filter (AOTF) is used as a high-resolution spectral filter, which scans the optical frequency of the broadband light emitted from a superluminescent diode. To generate spectral fringes that make full use of the limited coherence length of the filtered light we unbalanced the Mirau interferometric system by positioning the reference mirror nearly halfway between the top and the bottom of the step height. When the frequency of the broadband light source is scanned by an AOTF, the interference fringes move in opposite directions on the top and the bottom of the object. To uniquely determine the sign of the fringe movement over the large area of the object, we developed a three-dimensional Fourier-transform technique, and from the detected sign of the fringe movement and phase information, we determined the three-dimensional step height. Experimental results of the measurement of 100-microm step height are presented. The main advantages of the proposed system are that it provides nonmechanical scanning and a large measurement range without ambiguity in the sign of the phase.     

The influence of moving auditory stimuli on standing balance in healthy young adults and the elderly

The maintenance of postural balance depends on effective and efficient feedback from various sensory inputs. The importance of auditory inputs in this respect is not, as yet, fully understood. The purpose of this study was to analyse how the moving auditory stimuli could affect the standing balance in healthy adults of different ages. The participants of the study were 12 healthy volunteers, who were divided into two age categories: the young group (mean = 21.9 years) and the elderly group (mean = 68.9 years). The instrument used for evaluation of standing balance was a force plate for measuring body sway parameters. The toe pressure was measured using the F-scan Tactile Sensor System. The moving auditory stimulus produced a white-noise sound and binaural cue using the Beachtron Affordable 3D Audio system. The moving auditory stimulus conditions were employed by having the sound come from the right to left or vice versa at the height of the participant's ears. Participants were asked to stand on the force plate in the Romberg position for 20 s with either eyes opened or eyes closed for analysing the effect of visual input. Simultaneously, all participants tried to remain in the standing position with and without auditory stimulation that the participants heard from the headphone. In addition, the variables of body sway were measured under four conditions for analysing the effect of decreased tactile sensation of toes and feet soles: standing on the normal surface (NS) or soft surface (SS) with and without auditory stimulation. The participants were asked to stand in a total of eight conditions. The results showed that the lateral body sway of the elderly group was more influenced than that of the young group by the lateral moving auditory stimulation. The analysis of toe pressure indicated that all participants used their left feet more than their right feet to maintain balance. Moreover, the elderly had the tendency to be stabilized mainly by use of their heels. The young group were mainly stabilized by the toes of their feet. The results suggest that the elderly may need a more appropriate stimulus of tactile and auditory sense as a feedback system than the young for maintaining and control of their standing postures.     

Novel vitamin E derivative with 4-substituted resorcinol moiety has both antioxidant and tyrosinase inhibitory properties

A novel vitamin E derivative, (6″-hydroxy-2″,5″,7″,8″-tetramethylchroman-2″-yl) methyl 3-(2′,4′-dihydroxyphenyl)propionate (TM4R), which has a chromanoxyl ring and 4-substituted resorcinol moieties, was synthesized; and its inhibitory effects on tyrosinase, antioxidant ability, and lightening effect of ultraviolet B (UVB)-induced hyperpigmentation were estimated. TM4R showed potent inhibitory activity on tyrosinase, which is the rate-limiting enzyme in melanogenesis. The scavenging activities of TM4R on 1,1-diphenyl-2-picrylhydrazyl and hydroxyl radicals were found to be nearly the same as those of α-tocopherol. Furthermore, an efficient lightening effect was observed following topical application of TM4R to UVB-stimulated hyperpigmented dorsal skin of brownish guinea pigs. These results suggest that TM4R may be a candidate for an efficient whitening agent, possibly by inhibiting tyrosinase activity and biological reactions caused by reactive oxygen species.     

Structure and Bonding in Some Gd（Ⅲ） Metal Complexes Studied by Three-Dimensional X-Ray Analysis and ^155Gd Mossbauer Spectroscopy

Some functional lanthanide metal complexes, such as acetylacetonato complexes, ethylenediaminetetraacetato complexes, were successfully applied for diagnostic technique. The authors are interested in investigating the structure and bonding in lanthanide and actinide metal complexes using 166Er, t55Gd, and 237Np Mtissbauer spectroscopies in connection with single-crystal and/or powder X-ray diffraction, making clear the differences on their structures as well as the differences in the participation of 4f and 5f orbitals in the chemical bonds. In this article, the crystal structures of two novel Gd（Ⅲ） acetylacetonato complexes, Gd（pta）3 · 2H2O （pta = 1,1,1 -trifluoro-5,5-dimethy 1-2,4-hexanedione） and Gd（bfa）3 · 2H2O （bfa = 1, 1, 1 -trifluoro-4-phenyl-2-4-butanedione） were reported. Though both of them were dihydrate and had distorted square antiprismatical structure, Gd（pta）3 · 2H2O crystallizes in the P 2 1/n （#14） monoclinic space group and its lattice parameters are a = 1.4141（6） nm, b = 1.0708（3） nm, c =2.2344（4） nm, β =952.4（2）°, and Gd（bfa）3· 2H2O crystallizes in P 212121 orthorhombic space group and its lattice parameters were a = 1.322 （1） nm, b = 2.295 （1） nm, c = 1. 0786（8） nm. In the meantime, the authors had finished a systematic investigation on the ^155Gd Mossbauer isomer shift （δ） of various Gd（Ⅲ） metal complexes having a different coordination number （C.N.） and different ratios coordinating oxygen to nitrogen. A tendency for the 6 value to decrease with an increase in the C.N, and the number of the nitrogen atom coordinating to Gd was confirmed. This indicated that the Gd-O and/or Gd-N bond in the investigated Gd（Ⅲ） metal complexes had a small covalent contribution, which was possible to be deduced from the O and/or N atoms of the lisands donating electrons to 6s, 5d, and 4f orbitals of Gd.     

“Segment-wise model” for theoretical simulation of barely visible indentation damage in composite sandwich beams: Part II – Experimental verification and discussion

When localized transverse loading is applied to a sandwich structure, the facesheet locally deflects and the core crushes. A residual dent induced by the core crushing significantly degrades the mechanical properties of the sandwich structure. In a previous paper, the authors established a “segment-wise model” for theoretical simulation of barely visible indentation damage in honeycomb sandwich beams with composite facesheets. Honeycomb sandwich beam was divided into many segments based on the periodic shape of the honeycomb and complicated through-thickness characteristics of the core were integrated into each segment. In this paper, the new model is validated by experiments using specimens with different types of honeycomb cores. In addition, the damage growth mechanism under indentation load was clarified from the viewpoint of the reaction force from the core to the facesheet. The applicability of the model to other types of core materials is also discussed.     

Mössbauer studies and magnetic properties of SnO2 doped with Fe

Transparent conducting SnO₂ powders doped with 10% Fe content were prepared by a polymerized complex method under acidic solutions, and annealed finally at 550 °C, and at 600 °C. These samples were characterized by X-ray diffraction, magnetization, and Mössbauer spectrometry at room temperature. Rutile SnO₂ phase was obtained for both samples, and the crystallite sizes were in the range of 13-14 nm. Both samples exhibit magnetization and the saturation magnetization was smaller for the sample annealed at 600 °C than for sample annealed at 550 °C. Room temperature Mössbauer spectra for both samples showed the presence of two different paramagnetic iron sites but no magnetic sextets. These results suggest that ferromagnetism originates from magnetic defects and not directly from iron ions.     

Delay-time=code division multi-access in frequency-selective channel

A new hybrid multi-access technique, called delay-time/code division multi-access (DT/CDMA), is proposed. Multiplexing is accomplished in both the delay-time domain and code domain. Delay-time division multiplexing is achieved by assigning different cyclic time delays to the same spreading sequence. At a receiver, frequency-domain equalisation, despreading, and demultiplexing are performed simultaneously in the frequency domain. The bit error rate performance when using the proposed DT/CDMA in a frequency-selective Rayleigh fading channel is evaluated by computer simulation.