从高放废液中分离回收锕—镧系元素工作的进展

概要介绍国内外从核燃料后处理高放废液中分离回收锕-镧系元素的工作进展,并对主要的流程进行评述。     

Inelastic constitutive equation of plasma-sprayed ceramic thermal barrier coatings

Ceramic thermal barrier coatings (TBCs) are a very important technology for protecting the hot parts of gas turbines (GTs) from a high-temperature environment. The coating stress generated in the operation of GTs brings cracking and peeling damage to the TBCs. Thus, it is necessary to evaluate precisely such coating stress in a TBC system. We have obtained a stress-strain curve for a freestanding ceramic coat specimen peeled from a TBC coated substrate by conducting the bending test. The test results have revealed that the ceramic coating deforms nonlinearly with the applied loading. In this study, an inelastic constitutive equation for the ceramic thermal barrier coatings deposited by APS is developed. The obtained results are as follows: (1) the micromechanics-based constitutive equation was formulated with micro crack density formed at splat boundary, and (2) it was shown that the numerical results for a nonlinearly deformed beam simulated by the developed constitutive equation agreed with the experimental results obtained by cantilever bending tests.     

Co(-Fe)-B-Si-Nb块体非晶合金

利用团簇线方法和微合金化原理研究了Co基Co(-Fe)-B-Si-Nb多组元合金体系中块体非晶合金的形成。首先,确定Co-B-Si三元体系为基础体系,利用团簇线(体现在三元体系中为二元特殊团簇与第三组元的连线)在Co-B-Si体系中确定基础合金成分;然后添加少量的Nb对基础三元成分进行合金化以提高合金的玻璃形成能力。利用铜模吸铸法制备直径为3mm的合金棒,结果表明能够形成块体非晶的合金成分为(Co8B3-Si)100-xNbx(x=4～5at%),其中,Co8B3为密堆附半八面体的阿基米德反棱柱团簇结构。并且这些非晶成分可近似地用(团簇)1(胶粘原子)1模型表达,为(Co8B3)1M1(M=(Si,Nb)),即非晶成分由一个团簇连接一个胶粘原子组成,其中胶粘原子M为Si和Nb原子的组合。最后用Fe替代部分Co可进一步提高合金的玻璃形成能力,得到的Co-Fe-B-Si-Nb五元块体非晶合金具有很好的软磁性能,其饱和磁化强度(Ms)最大可达0.98T,矫顽力(Hc)低于6A/m。     

反思四级考试 提高教学质量

本文分析了大学英语四级考试与大学英语教学之间的关系,指出应正确对待四级考试,并提出一些提高大学英语教学质量,培养学生语言动用能力的措施。     

QUADRANT ANALYSIS OF BUBBLE INDUCED VELOCITY FLUCTUATIONS IN A TRANSITIONAL BOUNDARY LAYER

Our previous study showed that the frictional drag decreases with increasing void fraction at Re > 1300, while it increases at Re < 1000. Decomposition of the Reynolds shear stress also implied that bubbles induce isotropy of turbulence. In order to confirm our previous analysis and to further investigate flow fields in the vicinity of bubbles, we analyze velocity fluctuations on the quadrant space in the streamwise and transverse directions ( u′ – v′ plane). Here, we focus on two specific Reynolds numbers ...     

A label-setting algorithm for finding a quickest path

The quickest path problem is to find a path to send a given amount of data from the source to the destination with minimum transmission time. To find the quickest path, existing algorithms enumerate non-dominated paths with distinct capacity, and then determine a quickest path by comparing their transmission time. In this paper, we propose a label-setting algorithm for finding a quickest path by transforming a network to another network where an important property holds that each subpath of a quickest path is also a quickest path. The proposed algorithm avoids enumerating non-dominated paths whose transmission time is greater than the minimum transmission time. Although the computational complexity of the proposed algorithm is the same as that of existing algorithms, experimental results show that our algorithm is efficient when a network has two or more non-dominated paths.     

Effect of Heat Treatment on the Corrosion Characteristics of Al-Li Alloys

Experiments were conducted to study the general room temperature corrosion characteristics of heat-treated and non-heat-treated Al-Li alloys with different Li compositions. Corrosion rate was measured using both the polarisation method and the weight-loss method. It was observed that the samples with higher Li content had lower corrosion resistance than those with lower Li content. Moreover, for all the specimens tested, it was fOund that heat treatment at 180℃ for 2 h (for the purpose of precipitation hardening) severely reduced the corrosion resistance,whereas heat treatment at 180℃ for 6 h significantly increased the corrosion resistance.