A Highly Efficient and Stable Photocatalyst; N-Doped ZnO/CNT Composite Thin Film Synthesized via Simple Sol-Gel Drop Coating Method

The thin film of N-doped ZnO/CNT nanocomposite was successfully fabricated on soda lime glass substrate by a simple sol-gel drop-coating method. The structural, morphological, chemical, and optical properties of as prepared samples were characterized by a variety of tools such as X-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM), Fourier Transform Infrared spectroscopy (FT-IR), and UV-visible spectroscopy. The hexagonal crystalline structure was confirmed from XRD measurement without any other impurity phase detection in samples. The N-doped ZnO/CNT composite showed excellent photo-catalytic activity towards cationic methylene blue (MB) dye degradation with 100% removal rate under UV light irradiation as compared to N-doped ZnO (65%) and pure ZnO (47.36%). The convincing performance has also been observed for the case of visible light irradiation. The enhancement of that photocatalytic activity might be due to narrowing the band gap as well as the reduction of electron–hole pair recombination in ZnO matrix with the incorporation of dopant nitrogen and CNT. It is assumed from the obtained results that N-doped ZnO/CNT nanocomposite thin film can be employed as an economically achievable and ecofriendly method to degrade dye with UV and visible light irradiation. Additionally, density functional theory (DFT) calculations were applied to explore the effect of N-doping on electronic structure of ZnO. The computational study has supported the experimental results of significant band gap contraction, which leads to the maximum absorption towards higher wavelength and no appreciable change of lattice parameters after doping. A conceivable photocatalytic mechanism of N-doped ZnO/CNT nanocomposite has been proposed as well.     

Extraction of metal ions (Fe<Superscript>3+</Superscript>, Co<Superscript>2+</Superscript>, Ni<Superscript>2+</Superscript>, Cu<Superscript>2+</Superscript> and Zn<Superscript>2+</Superscript>) using immobilized-polysiloxane iminobis(n-2-aminophenylacetamide) ligand system

A new insoluble solid functionalized ligand system bearing chelating ligand group of the general formula P-(CH₂)₃-N[CH₂CONH(C₆H₄)NH₂]₂, where P represents [Si–O] _n polysiloxane network, was prepared by the reaction of the immobilized diethyliminodiacetate polysiloxane ligand system, P-(CH₂)₃N(CH₂CO₂Et)₂ with 1,2-diaminobenzene in toluene. ¹³C CP-MAS NMR, XPS and FTIR results showed that most ethylacetate groups (–COOEt) were converted into the amide groups (–N–C=O). The new functionalized ligand system exhibits high capacity for extraction and removal of the metal ions (Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺) with efficiency of 95–97% after recovery from its primary metal complexes. This functionalized ligand system formed 1:1 metal to ligand complexes.     

Chemical composition of volatile oils of Aquilaria malaccensis (Thymelaeaceae) from Malaysia

Volatile oils of Aquilaria malaccensis Benth. (Thymelaeaceae) from Malaysia were obtained by hydrodistillation and subjected to detailed GC-FID and GC/MS analyses to determine possible similarities and differences in their chemical composition in comparison with the commercial oil. A total of thirty-one compounds were identified compared with twenty-nine identified in the commercial oil. The major compounds identified were 4-phenyl-2-butanone (32.1%), jinkoh-eremol (6.5%) and alpha-guaiene (5.8%), while the major compounds in the commercial oil were alpha-guaiene (10.3%), caryophellene oxide (8.6%), and eudesmol (3.2%). The results of the present study showed that more than nine sesquiterpene hydrocarbons were present, which is more than previously reported. Analysis also showed that the number of oxygenated sesquiterpenes in this study were much less than previously reported. Among the compounds detected were alpha-guaiene, beta-agarofuran, alpha-bulnesene, jinkoh-eremol, kusunol, selina-3,11-dien-9-one, oxo-agarospirol and guaia-1 (10), 11-dien-15,2-olide.     

Zinc Chloride–Catalyzed Expeditious Route to Nitriles

Zinc chloride has been found to be an excellent catalyst for a one-pot synthesis of nitriles from araldehydes and hydroxylammonium chloride under solvent-free conditions. The features of the present method are short reaction time, easy workup procedure, and good yields of the nitriles.     

Evaluation of phase transformation behaviors of zeolite and antibacterial properties against Gram-positive and -negative bacteria

This study deals with the synthesis of zeolite from natural kaolinite using hydrothermal treatment and evaluation of its phase transformation behaviors. The synthesized zeolites were modified with silver ion by using the ion exchange method for the enhancement of antibacterial properties. The characterizations were performed by using X-ray diffraction spectroscopy, Fourier-transform infrared spectroscopy, field emission scanning electron microscopy, and energy-dispersive X-ray. Disk diffusion technique (DDT) was used for the evaluation of the antibacterial property of the modified zeolites. This study observed the transformation of kaolinite into amorphous metakaolin after calcination treatment at 900°C and the successful reconstruction of amorphous metakaolin into synthesized crystal zeolite in the presence of sodium hydroxide as an activating agent. It was also found that the zeolite type A was produced at 100°C, while sodalites were produced at 120 and 140°C. DDT analysis revealed that the modified zeolites showed significant antibacterial capability against Escherichia coli ATCC 11229 and Staphylococcus aureus ATCC 6538. In general, the present study has proven that the zeolites can be synthesized from natural material and can be modified with silver ion to enhance their antibacterial activity.     

Synthesis and Structural Characterization of a New Macrocyclic Polysiloxane-immobilized Ligand System

Summary. A new porous solid macrocyclic 1,4,7,11,14-pentaazapentadecane-3,15-dione polysiloxane ligand system of the general formula P–(CH₂)₃–C₁₁H₂₂O₂N₅ (where P represents [Si–O]_n siloxane network) has been prepared by the reaction of polysiloxane-immobilized iminobis(N-(2-aminoethyl)acetamide) with 1,3-dibromopropane. The FTIR and XPS results confirm the introduction of the macrocyclic functional ligand group into the polysiloxane network. The new macrocyclic polysiloxane ligand system exhibits high potential for the uptake of metal ions (Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺).     

A review on polysiloxane-immobilized ligand systems: Synthesis, characterization and applications

The immobilized silica gel ligand systems made by modification of silica surfaces have been briefly summarized. Short background was described based on the synthesis methods and their applications. In this review more attention towards the functionalized polysiloxane xerogels and their postmodification has been given. Polysiloxane-immobilized ligand systems bearing organofunctionalized ligand groups of general formula P-(CH₂)₃-X (where P represents a three-dimensional silica like network-matrix and X is an organofunctional group) were prepared through the sol-gel process by hydrolytic polycondensation of Si(OR)₄ and the appropriate silane coupling agent (RO)₃Si(CH₂)₃X (where R is an alkyl group, e.g CH₃ or C₂H₅). There are many other immobilized ligand systems, which were prepared by treatment of post-polysiloxane precursors with an appropriate organofunctional ligand. Variety of functionalized materials ranging from simple up to macrocyclic immobilized ligand systems were prepared and well characterized. These materials have the advantage over the functionalized silica, as they can be prepared using different molar ratios of Si(OR)₄ and (RO)₃Si(CH₂)₃X silane agents, and therefore their metal uptake capacities can be altered. A mixture of two different ligand groups can also be achieved on the same matrix. Analytical and environmental applications of these materials have been reported including extraction, separation and preconcentration of metal ions. A variety of physical chemistry techniques that were employed to characterize the surface and the bulk of the immobilized systems were reported. These included high-resolution solid-state nuclear magnetic resonance (NMR), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR).     

Pyrrole functionalised metalloporphyrins as electrocatalysts for the oxidation of nitric oxide

Pyrrole-functionalised tetracarboxyphenyl porphyrin and trimethoxyphenylcarboxy-phenyl porphyrin containing Ni, Mn and Pd as the central metal ion were used to modify Pt-disk microelectrodes (∅ 50 μm) (by repetitive cyclic voltammetry, dip-dry and pulse-amperometry methods) for the detection of nitric oxide (NO). Electrodes modified with Mn(II) trimethoxyphenylcarboxyphenyl porphyrin using the pulse amperomery approach, were found to be sensitive, stable and fast in response towards the oxidation of NO. Thus, they were used for the detection of NO release from a population of transformed human umbilical vein endothelial cells (T-HUVEC) into a droplet of electrolyte solution following stimulation with vascular endothelial growth factor (VEGF). The electrode surface was covered with an additional layer of Nafion® to prevent interference from anionic molecules such as nitrite.     

Current Status of Endoplasmic Reticulum Stress in Type II Diabetes

The endoplasmic reticulum (ER) plays a multifunctional role in lipid biosynthesis, calcium storage, protein folding, and processing. Thus, maintaining ER homeostasis is essential for cellular functions. Several pathophysiological conditions and pharmacological agents are known to disrupt ER homeostasis, thereby, causing ER stress. The cells react to ER stress by initiating an adaptive signaling process called the unfolded protein response (UPR). However, the ER initiates death signaling pathways when ER stress persists. ER stress is linked to several diseases, such as cancer, obesity, and diabetes. Thus, its regulation can provide possible therapeutic targets for these. Current evidence suggests that chronic hyperglycemia and hyperlipidemia linked to type II diabetes disrupt ER homeostasis, thereby, resulting in irreversible UPR activation and cell death. Despite progress in understanding the pathophysiology of the UPR and ER stress, to date, the mechanisms of ER stress in relation to type II diabetes remain unclear. This review provides up-to-date information regarding the UPR, ER stress mechanisms, insulin dysfunction, oxidative stress, and the therapeutic potential of targeting specific ER stress pathways.