用低能电子衍射研究Ag(100)表面吸附氯的表面结构

引言我们曾研究了金属镍,铜,钛,钨,铝,铁,银,铂,钼等和非金属硅与石墨及ⅢA—VA与ⅡB—ⅥA化合物晶体等的弛豫、重构和吸附表而的60多个表面结构。本文报道研究Ag(100)c(2×2)—C1表面的结果。Zanazzi和Jona观测了Ag(100)c(2×2)—C1表面结构的21束LEED谱,并采用层—KKR(Korring—Kohn—Rostocker)法,对清洁的Ag(100)表面吸附C1原子时假设了4种结构模型。经理论计算与观测值的比较,提出了C1原子的单层吸附和C1原子与Ag原子     

新型重整催化剂的研究—Pt／BaKL型沸石中钡的作用

本文采用XRD,NH_3-TPD,IR以及TEM等方法考察了Pt/BaKL沸石中Ba~(2+)的作用。NH_3-TPD结果表明,交换Ba~(2+)后的L型沸石的酸性,由于阳离子的作用仅在弱酸范围内有些改变,但与载铂的沸石的催化活性无明显的对应关系。IR及XRD谱线表明,BaKL沸石中Ba~(2+)在最佳交换度(26.3%)时,随预培烧温度的提高,使Ba~(2+)处于沸石孔道中B、C、D位置,接近于最佳分布,此时IR谱线上1421cm~(-1)处有一新峰。当沸石负载铂后,因铂与Ba~(2+)的相互作用,新峰消失,导致铂粒在沸石上分布更加均匀;铂粒在1.5—3.0nm之间占有最大比例,使得Pt/BaKL沸石呈现芳构化活性及选择性高于Pt/KL沸石,分别为～98%和～95%。     

中红外波段二阶非线性光学晶体材料研究进展

新型无机红外波段二阶非线性光学晶体材料在光电子领域有着重要的应用，对它们的探索是当前非线性光学材料研究领域的难点和前沿方向之一。本文将材料按组成分成三大类（即经典的ABC₂型黄铜矿结构化合物，硫属元素其他化合物和AMX₃型卤化物），分别就新材料探索、已知材料的单晶生长等综述了近10余年来中红外波段二阶非线性光学晶体材料的研究进展。     

Biopolymer and carbon nanotubes interface prepared by self-assembly for studying the electrochemistry of microperoxidase-11

Stable films of biopolymer chitosan and carbon nanotubes were prepared by a layer-by-layer self-assembly technique. Atomic force microscopy, scanning electron microscopy, cyclic voltammetry, and UV-vis spectroscopy were used to characterize the film assembly. Atomic force microscopy and scanning electron microscopy showed that an even, stable film was formed. The UV-vis spectroscopy and cyclic voltammetry study indicated the uniform growth of the film. The property of the self-assembled multilayer film in promoting protein electron transfer was demonstrated by incorporating microperoxidase-11 in the film. Microperoxidase-11 in the multilayer film could transfer electrons with the electrode indicating that carbon nanotubes could wire the protein to the electrode. The electrocatalytic activity of the microperoxidase-11 containing multilayer film-modified electrode toward H(2)O(2) and O(2) was investigated. The results showed that along with the increase in the assembled layers the electrocatalytic reduction potentials of H(2)O(2) and O(2) shifted positively. The prepared multilayer film of chitosan and carbon nanotubes containing protein was a sensitive interface for electrocatalytic study.     

Synthesis, structure and fluorescence of a novel diarylethene

The photochromic diarylethene, 1,2-bis(2-methyl-5-(2-(1,3-dithiolpentane))-thien-3-yl)perfluorocyclopentene (BMDTP), has been synthesized in high yield and its structure was determined by X-ray crystallographic analysis. The compound undergoes a photochromic reaction both in solution and in the single crystalline phase. In addition, its fluorescence property in solution is discussed.     

电沉积AuInSe2半导体薄膜上的电化学振荡现象

研究了电沉积制得的ＡｕＩｎＳｅ２半导体薄膜上过氧化氢阴极还原过程中产生的电化学振荡行为，对影响该振荡行为的一些因素如半导体薄膜的后处理、溶液组成、传质、光照、化学浸渍作用等进行了分析，同时采用外界周期性光照和外接小幅度正弦波电位来调节振荡频率，为金铟硒半导体薄膜发展成为光电传感器件提供了一定的理论与实践基础．     

Homogeneous rare earth coordination catalysts for copolymerization of styrene with acrylonitrile

The study on homogeneous rare earth coordination catalysts, LnL₃-Al(i-Bu)₃-CCl₄, for the copolymerization of styrene with acrylonitrile has been successfully carried out for the first time. Some features and kinetic behavior of copolymerization of styrene with acrylonitrile by Nd(P₂₀₄)₃-Al(i-Bu)₃-CCl₄ system are described. The catalyst sites appear to possess both coordinate anionic and free radical characteristics. The catalytic activity of various rare earth elements in Ln(P₂₀₄)₃ and ligands in NdL₃ for the copolymerization have the following order, respectively: Yb > Er > Tb ～ Tm > Ho > Ce > Lu ～ Sm ～ La > Pr > Nd, and Nd(naph)₃ > Nd(P₂₀₄)₃ ～ Nd(P₅₀₇)₃ > Nd(acac)₃·3H₂O. An alternating-rich copolymer of styrene-acrylonitrile with a high softening point (195–230°C) was obtained by the LnL₃-Al(i-Bu)₃-CCl₄ systems in toluene at 80°C.     

二苯并噻吩亚砜的单晶结构及其π-π堆积作用理论研究

采用X射线衍射法测定二苯并噻吩亚砜单晶结构,发现晶体中二苯并噻吩亚砜分子以反平行三明治式的结构Ⅲ和反平行位移式的结构Ⅳ两种堆砌方式交替堆砌形成有序π-π堆积晶体。二苯并噻吩亚砜单晶结构属于三斜型,空间群为P1,晶体参数为:a=0.84712nm,b=0.94137nm,c=1.20380nm,α=97.866°,β=106.2630°,γ=96.437°,V=0.9014nm3,R1(全部数据)=0.0348和ωR2(全部数据)=0.0814。利用BHandH/6-31 G**方法计算了二苯并噻吩亚砜分子间的π-π堆积作用,Ⅲ和Ⅳ堆砌模式的π-π堆积效应作用能相当大,其计算值分别为-36.06kJ/mol和-39.83kJ/mol,电荷分布表明正负电荷匹配是稳定晶体π-π堆积体系的重要因素。     

Improving MCM‐41 as a Nitrosamines Trap through a One‐Pot Synthesis

Copper oxide was incorporated into MCM‐41 by a one‐pot synthesis under acidic conditions to prepare a new mesoporous nitrosamines trap for protection of the environment. The resulting composites were characterized by XRD, N₂ adsorption–desorption, and H₂ temperature‐programmed reduction techniques, and their adsorption capabilities were assessed in the gaseous adsorption of N‐nitrosopyrrolidine (NPYR). The adsorption isotherms were consistent with the Freundlich equation. The copper salt was deposited onto MCM‐41 during the evaporation stage and was fixed on the host in the calcination process that followed. MCM‐41 was able to capture NPYR in air below 373 K but not at 453 K. Loading of copper oxide on MCM‐41 greatly improved its adsorption capability at elevated temperatures. The influence of the incorporation of copper into MCM‐41 samples and the adsorption behavior of these samples are discussed in detail.     

固定波长同步荧光光谱参数的理论计算

基于荧光激发光谱和发射光谱对波长呈高斯分布的设定,本文推导出固定波长同步荧光光谱峰峰值位置、相对强度和半峰宽度等3个主要光谱参数的理论计算式。所提出的计算式应用于若干荧光物质光谱参数的计算,并和实测值、文献计算值作了对照。结果表明,和文献计算方法相比,本法与所研究物质的实际光谱参数较为接近,可为固定波长同步荧光光谱参数的理论计算提供一有效方法。