Computer-assisted optimization and validation of LC analysis of trimetazidine dihydrochloride and its impurities

Trimetazidine dihydrochloride is an anti-anginal drug, which possesses protective properties against ischemia inducing heart damage. In this paper, a new procedure for liquid chromatographic analysis was successfully developed, optimized, and applied in assessment of trimetazidine dihydrochloride content and its impurities, Y-145, Y-235, and Y-234 at most 1.0%, 0.2%, and 0.2%, respectively, in commercially available pharmaceutical preparation containing 35 mg of trimetazidine dihydrochloride. The retention behavior of trimetazidine dihydrochloride and its impurities is investigated by using several stationary and mobile phases to settle a simple, sensitive, and precise RP-HPLC method. The separation conditions are optimized by DryLab 2000 Plus Chromatography Optimization Software version 3.5.00. Separations are performed on PurospherSTAR RP18 endcapped (150 x 4.6 mm, 5 microm particle size) column at 20 degrees C with UV detection at 210 nm. The mobile phase composition is acetonitrile-aqueous phase (10 mmol/L disodium hydrogenphosphate and 2 mmol/L sodium dihydrogen phosphate, pH 7.6) (30:70 v/v). Afterwards, the method is validated; the important statistical parameters for selectivity/specificity, linearity, precision, limit of detection, and quantitation are defined. The recovery value of the trimetazidine dihydrochloride is 98.06%, and the content of impurities is 0.23% for Y-145, less than 0.02% for Y-235, and less than 0.01% for Y-234. In addition, this method is used for analyzing trimetazidine dihydrochloride and its impurities in pharmaceuticals and bulk drug.     

Applying Multivariate Methods in the Estimation of Bioactivity Properties of Acetamide Derivatives

JPC – Journal of Planar Chromatography – Modern TLC - It has been established that the selected acetamide derivatives fulfill Veber’s and Pardridge’s rule of good...     

Factorial-Based Designs in Liquid Chromatography

In this paper, the review on application of factorial-based designs in liquid chromatography (LC) is given. The most useful and applicable full factorial design and reduced forms of full factorial design (fractional factorial design and Plackett–Burman design) applied in LC are presented. Literature survey shows that experimental design presents very often used tool in screening, optimization and robustness testing of LC methods.     

Kinetics of the disproportionation reaction of HIO2 in acidic aqueous solutions

We review and discuss kinetic studies of the disproportionation reaction of iodous acid (HIO₂) in the presence of excess of Hg²⁺‐ions. The reactions are followed at different temperatures in water solution with strongly defined acidity. The rate constants of disproportionation are determined between 285 and 303 K based on kinetic data obtained under steady‐state conditions. The calculated rate constants increase with increasing temperature and acid concentration. The corresponding values of activation energy as well as enthalpy and entropy of activation for this reaction have been calculated. The enthalpy of activation as well as entropy is higher at higher sulfuric acid concentration. Also, it was considered that the values of Gibbs energy of formation of HgI⁺ are generated during the process. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 687–691, 2010     

Characterization of pottery from Republic of Macedonia. III. A study of comparative mineralogical detection efficiency using micro‐Raman mapping and X‐ray diffraction

Point‐to‐point micro‐Raman and X‐ray diffraction (XRD) techniques were employed for characterization of minerals present in the pottery body of 27 glazed Byzantine and Ottoman pottery shreds, excavated at two different archaeological sites in the Republic of Macedonia: in Skopje (Skopsko Kale) and in Prilep (Markovi Kuli and Sv. Atanas Church). The Raman spectra of 18 Byzantine samples (dating from 12th−14th century) and nine Ottoman samples (dating from 17th−19th century) revealed 26 different minerals. XRD measurements were further performed on the same powder samples to validate the mineralogical assessment obtained by point‐to‐point micro‐Raman spectroscopy. Although only 13 different mineral phases were obtained by the XRD, the results obtained from the Raman and XRD spectra for the most abundant minerals in the investigated pottery bodies match quite well. However, the identification of the less abundant minerals in the clay matrixes from the XRD data was very difficult, if at all possible. The results emphasize the specifics of the applied techniques and their limits. Additionally, wavelength dispersive X‐ray fluorescence spectroscopy was used for the elemental analysis. Copyright © 2011 John Wiley & Sons, Ltd.     

Kinetic study of the reaction Ca+ + N2O from 188 to 1207 K

Ion-molecule reactions involving metallic species play a central role in the chemistry of planetary ionospheres and in many combustion processes. The kinetics of the Ca(+) + N(2)O --> CaO(+) + N(2) reaction was studied by the pulsed multiphoton dissociation at 193 nm of organo-calcium vapor in the presence of N(2)O, followed by time-resolved laser-induced fluorescence spectroscopy of Ca(+) at 393.37 nm (4(2)P(3/2) <-- 4(2)S(1/2)). This yielded k(188-1207 K) = 5.45 x 10(-11) (T/300 K)(0.53) exp(282 K/T) cm(3) molecule(-1) s(-1), with an estimated accuracy of +/-13% (188-600 K) and +/-27% (600-1207 K). The temperature dependence of this barrierless reaction, with a minimum in the rate coefficient between 400 and 600 K, appears to be explained by the role of N(2)O vibrational excitation. This is examined using a classical trajectory treatment on a potential energy surface calculated at the B3LYP/6-311+g(2d,p) level of theory.     

A note on the article “Fuzzy alpha-sets and alpha-continuous maps”

In this note we show that some results which appeared in the article by M.K. Singal and N. Rajvanshi [Fuzzy Sets and Systems 48 (1992) 383–390] are incorrect.     

Adsorptive stripping voltammetric determination of azithromycin at a glassy carbon electrode modified by electrochemical oxidation.

The adsorptive and electrochemical behaviors of azithromycin were investigated on a glassy carbon electrode that was electrochemically treated by anodic oxidation at +1.8 V, following potential cycling in the potential range from -0.8 to +1.0 V. The resulting electrode showed good activity to improve the electrochemical response of the drug. An adsorptive stripping voltammetric method for the determination of azithromycin at an electrochemically activated glassy carbon electrode has been developed. Azithromycin was accumulated in phosphate buffer, pH 6, at a potential of +0.3 V (vs. Ag/AgCl electrode) for a certain time, and then determined by differential pulse voltammetry. The oxidative peak current at +0.82 V, at a scan rate of 20 mV s(-1), was a linear function of the concentration in the ranges of 0.25 - 2 microg mL(-1) and 1 - 10 microg mL(-1) using a 240 or 60 s(-1) preconcentration time, respectively. Application of the method to the determination of azithromycin in pharmaceuticals resulted in an acceptable deviation from the stated concentration. The preconcentration medium-exchange approach was utilized for the selective determination of the drug in spiked urine samples with satisfactory results. The peak current was linear with the drug concentration in the range of 0.5 - 3.5 microg per mL urine. The detection limit was 0.2 microg mL(-1) urine. The recovery levels of the method reached 96.3%.