An integrated microfluidic device for influenza and other genetic analyses

An integrated microfluidic device capable of performing a variety of genetic assays has been developed as a step towards building systems for widespread dissemination. The device integrates fluidic and thermal components such as heaters, temperature sensors, and addressable valves to control two nanoliter reactors in series followed by an electrophoretic separation. This combination of components is suitable for a variety of genetic analyses. As an example, we have successfully identified sequence-specific hemagglutinin A subtype for the A/LA/1/87 strain of influenza virus. The device uses a compact design and mass production technologies, making it an attractive platform for a variety of widely disseminated applications.     

Ferri-spin glass nature of spinel ferrites Gax Fe1−x Ni Cr O4

Mössbauer measurements in mixed spinel ferrite Ga_x Fe_1–x Ni Cr O₄ (0x0.8), carried out between 4.2 and 298°K, show the presence of entropic spins in this system. Recent Monte Carlo calculations /4/ have predicted the presence of such spins in a frustrated spin glass lattice.     

Mössbauer spectroscopy study of iron corrosion underneath painting system

The effect of pigments on the development of corrosion products between the painting system and metal surface when exposed to marine environments has been discussed. The pigments studied were; Red Mud Zinc chromate, Zinc chromate, Red oxide Zinc Phosphate, Manganese Phosphate Barium chromate and Basic Lead Silico Chromate. Mossbauer Spectroscopy revealed that the upper rust layer in all the cases consisted of-Fe203,-FeOOH and-FeOOH. The lower rust layer immediately in contact with the metal surface consisted of an asymmetrical doublet due to -FeOOH.     

Organotellurium derivatives : IV. Synthesis of some diaryltellurium dihalides and pseudohalides

Iodine monohalides (ICl, IBr), cyanogen halides (CNBr, CNI) and thiocyanogen (SCN)₂ add oxidatively to diaryltellurium(II), R₂Te (R = Ph, p-Ch₃OC₆H₄) under mild conditions ( °C). The resulting organotellurium(IV) derivatives react metathetically with silver pseudohalides to yield several new diaryltellurium(IV) pseudohalide derivatives.     

The Spectrophotometric Determination of Gallium (III) with Glycine Thymol Blue

The reaction between gallium (III) and glycine thymol blue has been studied spectrophoptometrically in order to establish the optimum conditions for determining traces of gallium. The gallium (III) glycine thymol blue complex has an absorption maximum at 560 nm against a reagent blank and is stable between pH 4.0 and 5.5. The complex has a composition 1 : 2 and a formation constant of 6.4×10⁷ under the conditions studied. Beer's law is obeyed upto 126 μg of gallium. The net molar absorptivity has been found to be 11,000. The present method is very sensitive and rapid. Anions such as citrate and tartrate inhibit the colour development of the complex.     

Studies on polymerization of vinyl acetate using ylide as an initiator and degradative transfer agent

Polymerization of vinyl acetate initiated by β-picolinium p-chlorophenacylide was carried out at 30, 35, and 40°C, using conventional dilatometric technique. The initiator and the monomer exponent values were 0.80 ± 0.15 and unity, respectively. The polymerization was inhibited in the presence of hydroquinone, but was favored by nonpolar solvent and polymerization temperature. The energy of activation was 90.3 KJ mol^?1. An average value of k/k_t for the present system was found to be 0.37 × 10^?2. The results are explained in terms of a radical mode of polymerization with degradative initiator transfer; the principal mode of termination, however, was bimolecular.     

Optimization of culture parameters for production of podophyllotoxin in suspension culture of Podophyllum hexandrum

The root explants of the germinated seedlings of Podophyllum hexandrum were grown in MS medium supplemented with indole acetic acid (IAA) (2 mg/L) and activated charcoal (0.5%), and healthy callus culture was obtained after incubation for 3 wk at 20°C. The cultivation of plant cells in shake flask was associated with problems such as clumping of cells and browning of media, which were solved by the addition of pectinase and polyvinylpyrrolidone. The effect of major media components and carbon source was studied on the growth and podophyllotoxin production in suspension culture. It was found that glucose was a better carbon source than sucrose and that NH₄ ⁺:NO₃ ⁻ ratio (total nitrogen concentration of 60 mM) and PO₄ ³⁻ did not have much effect on the growth and product formation. The relative effect of culture parameters (inoculum level, pH, IAA, glucose, NH₄ ⁺:NO₃ ⁻ ratio, and PO₄ ³⁻) on the overall growth and product response of the plant cell suspension culture was further investigated by Plackett-Burman design. This indicated that inoculum level, glucose, IAA, and pH had significant effects on growth and production of podophyllotoxin. To identify the exact optimum concentrations of these parameters on culture growth and podophyllotoxin production, central composite design experiments were formulated. The overall response equations with respect to growth and podophyllotoxin production as a function of these culture parameters were developed and used to determine the optimum concentrations of these parameters, which were pH 6.0, 1.25 mg/L of IAA, 72 g/L of glucose, and inoculum level of 8 g/L.     

The complexes of aluminium,gallium, and indium with calmagite: Evaluation of stepwise stability constants

Summary Calmagite [1-(1-hydroxy-4-methyl-2-phenyl azo)-2-naphthol sulphonic acid], dissociates in two steps. It forms violet complexes with Al³⁺, Ga³⁺ and In³⁺. The stepwise proton-ligand stability constants of calmagite and stepwise metal-ligand stability constants of these complexes were evaluated by potentiometric titration technique ofBjerrum andIrving andRossotti. The order of the stabilities of complexes is In³⁺ > Ga³⁺ > > Al³⁺.

---

Zusammenfassung Camalgit [1-(1-Hydroxy-4-methyl-2-phenylazo)-2-naphtholsulfonsäure] dissoziiert in zwei Stufen und bildet violette Komplexe mit Al(III), Ga(III) und In(III). Die Konstanten der Dissoziationsstufen der freien Säure und die der Metallkomplexe wurden potentiometrisch nachBjerrum bzw.Irving undRossotti ermittelt. Die Stabilität der Komplexe nimmt in der Reihe In(III) > Ga(III) > Al(III) ab.

     

Poly(vinyl acetate) as a template for the radical polymerization of acrylonitrile

The template polymerization of acrylonitrile (AN) along with atactic-poly(vinyl acetate) of M _v (47,090), at 60°C for 120 min in dimethyl formamide (DMF) has been studied dilatometrically to study the effects of template, monomer, and initiator (benzoyl peroxide) concentration upon kinetics. Viscometric measurements showed that complexation between at-PVAc and PAN was maximum when template/polymer ratio was 1:1 and time required for complete complexation was 15 min. The overall energy of activation was 57.76 and 77.01 kJ/mol in the presence and absence of, PVAc, respectively. The overall system follows mechanism I, i.e., the monomer molecules get adsorbed on the surface of the template macromolecules and then propagation proceeds.     

Radical polymerization of styrene initiated by styrene–arsenic sulfide complex

Styrene forms a complex with arsenic sulfide which in DMF at 85°C initiates radical polymerization yielding high molecular weight polymer. The order of reaction, with respect to initiator and monomer, is 0.5 ± 0.02 and unity, respectively. The energy of activation for the system computed as 96 kJ mol^?1 and the polymerization is retarded by hydroquinone. A possible mechanism for reaction has also been proposed.