Second german heavy-metal survey by means of mosses,and comparison of the first and second approach in germany and other european countries

This paper shows the geographic distribution in Germany of iron (Fe), nickel (Ni) and lead (Pb) analyzed in mosses in 1995/96 and compares it with the results of the 1990/91 pilot study within a European moss-monitoring programme. Other elements (As, Cd, Cr, Cu, Ti, V, Zn) are compared on basis of the overall element medians for Germany of the 1990/91 and 1995/96 survey. Samples of Pleurozium schreberi, Scleropodium purum, Hypnum cupressiforme and Hylocomium splendens were taken at a total of 1026 sites. In the 1995/96 monitoring campaign, 95% of the original sites of the 1990/91 study were resampled. The results from 1995/96 display local elevated values and many cases of areas affected by known sources of heavy-metal emissions. The industrialized and urban regions of Germany are shown up clearly by the 1995/96 moss-monitoring results: the Ruhr area, parts of Saarland and Baden-Württemberg, as well as areas in eastern Germany. Relatively low values for many elements were found in large areas of Lower Saxony and Bavaria. A comparison of the results of the 1990/91 and 1995/96 moss-monitoring programmes shows a fall in the concentration of the presented elements (except cadmium, copper and zinc) over the relevant period. Especially in the former GDR, chromium (Cr), iron (Fe), titanium (Ti) and vanadium (V) decreased significantly. This is, firstly, a reflection of the closure of and/or technological improvements to large power plants; secondly it is due to the fact that lignite has given way to other fuels. Vanadium (V) and nickel (Ni), typical constituents of crude oil, also show a decrease in the western part and thus document changes in the type of fuel consumed. The significant fall in lead concentration in 1995/96 as compared to 1990/91 in what used to be East and West Germany probably results from the increasing use of lead-free petrol. A comparison of the median values for 1990/91 and 1995/96 in mosses to the rate of emission of heavy metals in Germany for 1990 and 1995 shows similar trends in the case of elements such as arsenic (As), chromium (Cr), nickel (Ni), and lead (Pb). The comparison of the medians of the elements analyzed for 19 European countries indicates for most of the elements a general tendency to lower values in 1995, except for Lithuania, Netherlands, Portugal, Italy and United Kingdom.     

Evaluation of food industry by-products as feed in semi-arid dairy farming systems: the case of Jordan

Dairy feeding systems in many semi-arid countries are based on imported concentrates and forages. This has economic and ecological implications given the increase in global feed prices and greenhouse gas (GHG) emissions from land use change. This paper aims to explore alternative dairy feeding systems under semi-arid conditions, using Jordan as an example. The feedings systems under investigation vary in their share of food industry by-products (replacing concentrates in the diet) and are compared against the current concentrate-based feeding systems. The systems are evaluated against three criteria: their nutritional value, their impact on the cost of milk production, and their GHG mitigation potential. Feed samples from eleven food industry by-products and ten conventional feeds were collected from food factories and from three typical dairy farms, representing the typical large-, medium- and small-scale farm types, respectively. Feed samples were analysed for their chemical composition and metabolisable energy contents. In addition, economic and production farm data were collected and entered into a model for GHGs calculation and economic evaluation. The results suggest that inclusion of locally available food industry by-products in the rations of milk cows in semi-arid production systems can be instrumental in reducing production costs and mitigating GHG emissions. Cost of milk production in the model farms can be lowered by up to 14 %; mitigation of CO₂ eq. emission ranged between 70 and 290 g CO₂ eq./kg milk. The degree to which these benefits can be reaped is positively related to the level of inclusion of by-product feeds in lactating cows’ diets.     

Mediterranean cyclones and windstorms in a changing climate

Changes in the frequency and intensity of cyclones and associated windstorms affecting the Mediterranean region simulated under enhanced Greenhouse Gas forcing conditions are investigated. The analysis is based on 7 climate model integrations performed with two coupled global models (ECHAM5 MPIOM and INGV CMCC), comparing the end of the twentieth century and at least the first half of the twenty-first century. As one of the models has a considerably enhanced resolution of the atmosphere and the ocean, it is also investigated whether the climate change signals are influenced by the model resolution. While the higher resolved simulation is closer to reanalysis climatology, both in terms of cyclones and windstorm distributions, there is no evidence for an influence of the resolution on the sign of the climate change signal. All model simulations show a reduction in the total number of cyclones crossing the Mediterranean region under climate change conditions. Exceptions are Morocco and the Levant region, where the models predict an increase in the number of cyclones. The reduction is especially strong for intense cyclones in terms of their Laplacian of pressure. The influence of the simulated positive shift in the NAO Index on the cyclone decrease is restricted to the Western Mediterranean region, where it explains 10–50 % of the simulated trend, depending on the individual simulation. With respect to windstorms, decreases are simulated over most of the Mediterranean basin. This overall reduction is due to a decrease in the number of events associated with local cyclones, while the number of events associated with cyclones outside of the Mediterranean region slightly increases. These systems are, however, less intense in terms of their integrated severity over the Mediterranean area, as they mostly affect the fringes of the region. In spite of the general reduction in total numbers, several cyclones and windstorms of intensity unknown under current climate conditions are identified for the scenario simulations. For these events, no common trend exists in the individual simulations. Thus, they may rather be attributed to long-term (e.g. decadal) variability than to the Greenhouse Gas forcing. Nevertheless, the result indicates that high-impact weather systems will remain an important risk in the Mediterranean Basin.     

Product Guide/1988

Investigation, mitigation, and clean-up of hazardous materials at Superfund sites normally requires on-site workers to perform hazardous and sometimes potentially dangerous functions. Such functions include site surveys and the reconnaissance for airborne and buried toxic environmental contaminants. Airborne contaminants of concern usually emanate from spilled materials and require monitoring the air at the perimeter and throughout the clean-up site to ascertain the extent of contamination. Buried contaminants of major concern are often the result of leaking underground drums containing toxic wastes and require "reconnaissance excavations" to determine their location. Workers conducting on-site air monitoring risk dermal, ocular and inhalation exposure to hazardous chemicals, while those performing excavations also risk the potential exposure to fire, explosion, and other physical injury. EPA's current efforts to protect its workers and mitigate these risks include the use of robotic devices. Using robots offers the ultimate in personnel protection by removing the worker from the site of potential exposure, especially during site investigations, when there is almost always a certain encounter with unknown chemical wastes having unknown toxicity.

This paper describes the demonstration of a commercially-available robotic plat form modified and equipped for air monitoring and the ongoing research for the development of a ground penetrating radar (GPR) system to detect buried chemical waste drums. These robotic devices can ultimately be routinely deployed in the field for the purpose of conducting inherently safe reconnaissance activities during Superfund / SARA remedial operations.     

Depressed prostaglandins and leukotrienes in veterans with Gulf War illness

Background: There is need to understand biological markers and mechanisms in Gulf War illness (GWI).

Goal: To examine whether and how eicosanoids – prostaglandins and leukotrienes – are altered in veterans with GWI.

Methods: Seventy participants including 37 GWI and 33 healthy controls, shared exposure information, and had plasma eicosanoids assessed – prostaglandin F2 alpha (pgf2α), prostaglandin D2 (pgd2), leukotriene B4 (lb4) among others. Values were compared for GWI versus controls. Eicosanoid intercorrelations were compared in cases vs. controls. For the most significantly altered eicosanoid in GWI, exposure and symptom relations were assessed.

Results: Prostaglandins and leukotrienes were depressed in GWI, strongest for pgf2α, then lb4. Eicosanoid intercorrelations differed in GWI vs. controls. Fuel-solvent, pesticide, radioactive chemicals and metal exposures related negatively to pgf2α; as, in GWI, did chemical attack and vaccines. Multivariate predictors included fuels-solvents and radioactive chemicals (negative); tetanus vaccine and herbicides (positive). Fuels-solvents and radioactive chemicals predicted lower pgf2α in cases, controls, and all participants controlled for case status. Lower pgf2α related to GWI “Kansas criteria” domains of pain, respiratory, and (borderline significantly) skin symptoms.

Conclusion: Multiple eicosanoids are depressed in GWI, particularly pgf2α and lb4. Prior fuel-solvent exposures, radioactive chemicals, and (in GWI cases) vaccines were linked to lower pgf2α.     

A rapid and efficient determination of natural estrogens in soils by pressurised liquid extraction and gas chromatography-mass spectrometry

We present a new analytical procedure for the extraction and determination of natural estrogens in soils based on pressurised liquid extraction and GC-MS determination. After testing twelve solvents, acetone proved to be the most efficient extractant. The optimum extraction temperature is 60 degrees C. Soil extracts have to be purified and concentrated by C-18 solid phase extraction. The dried extracts are derivatised by N-methyl-N-(trimethylsilyl)trifluoro-acetamide before measurement by GC-MS. Recoveries of 79-103% with relative standard deviations 相似文献   

Bakterielle Biotestverfahren zur Bestimmung der Toxizität von Abfällen

For a risk assessment of wastes, fast and sensitive screening methods are required to detect possible toxic effects. In this study, different leachability methods (DIN 38414, part 4; EPA 1310; EPA 1320) were used to prepare aqueous leachates from different wastes; these leachates were rested in different bacterial toxicity test systems for possible toxic effects. As bacterial toxicity tests, the luminescent bacteria test and the growth inhibition test with activated sludge bacteria were used. The test systems showed a good agreement of the results from the different leaching methods, thereby indicating the reliability of the test systems used. The luminescent bacteria inhibition test showed a higher sensitivity than the growth inhibition test which is in good accordance with literature data. We conclude that both test systems are well suited to assess the toxic potential of aqueous waste leachates.     

Effective rates of heavy metal release from alkaline wastes--quantified by column outflow experiments and inverse simulations

Column outflow experiments operated at steady state flow conditions do not allow the identification of rate limited release processes. This requires an alternative experimental methodology. In this study, the aim was to apply such a methodology in order to identify and quantify effective release rates of heavy metals from granular wastes. Column experiments were conducted with demolition waste and municipal waste incineration (MSWI) bottom ash using different flow velocities and multiple flow interruptions. The effluent was analyzed for heavy metals, DOC, electrical conductivity and pH. The breakthrough-curves were inversely modeled with a numerical code based on the advection–dispersion equation with first order mass-transfer and nonlinear interaction terms. Chromium, Copper, Nickel and Arsenic are usually released under non-equilibrium conditions. DOC might play a role as carrier for those trace metals. By inverse simulations, generally good model fits are derived. Although some parameters are correlated and some model deficiencies can be revealed, we are able to deduce physically reasonable release-mass-transfer time scales. Applying forward simulations, the parameter space with equifinal parameter sets was delineated. The results demonstrate that the presented experimental design is capable of identifying and quantifying non-equilibrium conditions. They show also that the possibility of rate limited release must not be neglected in release and transport studies involving inorganic contaminants.