NO2 catalytic formation,consumption, and efflux in various types of diesel particulate filter

Environmental Science and Pollution Research - The high NO2/NOX ratio in the after-treatment system is beneficial to its performance and achieved by NO catalytic conversion in diesel oxidation...     

Effect of lubricant sulfur on the morphology and elemental composition of diesel exhaust particles

This work investigates the effects of lubricant sulfur contents on the morphology, nanostructure, size distribution and elemental composition of diesel exhaust particle on a light-duty diesel engine. Three kinds of lubricant (LS-oil, MS-oil and HS-oil, all of which have different sulfur contents: 0.182%, 0.583% and 1.06%, respectively) were used in this study. The morphologies and nanostructures of exhaust particles were analyzed using high-resolution transmission electron microscopy (TEM). Size distributions of primary particles were determined through advanced image-processing software. Elemental compositions of exhaust particles were obtained through X-ray energy dispersive spectroscopy (EDS). Results show that as lubricant sulfur contents increase, the macroscopic structure of diesel exhaust particles turn from chain-like to a more complex agglomerate. The inner cores of the core-shell structure belonging to these primary particles change little; the shell thickness decreases, and the spacing of carbon layer gradually descends, and amorphous materials that attached onto outer carbon layer of primary particles increase. Size distributions of primary particles present a unimodal and normal distribution, and higher sulfur contents lead to larger size primary particles. The sulfur content in lubricants directly affects the chemical composition in the particles. The content of C (carbon) decreases as sulfur increases in the lubricants, while the contents of O (oxygen), S (sulfur) and trace elements (including S, Si (silicon), Fe (ferrum), P (phosphorus), Ca (calcium), Zn (zinc), Mg (magnesium), Cl (chlorine) and Ni (nickel)) all increase in particles.     

炼化企业分析化验岗位职业病危害防治措施研究

采用现场职业卫生学调查方法了解炼化企业分析化验岗位接触各类危害因素情况,对正常情况下分析化验工作场所进行各类职业病危害因素检测,同时测量各通风橱控制点风速、排风罩罩口风速;通风橱(风机通风量增加、管道改造)以及排风罩改造后,再次进行控制点风速测量、工作场所危害因素采样检测,对比改造前后测量数据,探讨分析化验岗位职业病危害防治措施。结果显示,工作场所通风设施的风机选型、管道合理化布置、排风罩围挡的设置、补风等因素均对通风橱、排风罩控制点风速产生影响;通风设施改造后工作场所职业病危害因素浓度有所降低。由此可见,炼化企业分析化验工作场所通风设施是职业病危害防治的重要措施。     

本溪地区灰霾天气时空分布特征分析研究

近年来,灰霾天气对本溪地区的影响越来越严重,由霾引发的环境污染对人们生产生活造成的影响也越来越大,因此对灰霾天气发生的时空分布特征的研究就尤为重要.文章运用本溪地面观测2012-2014年本溪市、本溪县、桓仁县3个国家基本站的观测资料,对霾日进行筛选和统计,分析本溪地区霾日发生的时空分布特征,本溪地区霾日数呈逐年增长趋势,2014年霾日数增长迅速.本溪地区冬半年霾日明显多于夏半年,两县霾日少于市区,空气质量优于市区.     

Sulfur speciation and bioaccumulation in camphor tree leaves as atmospheric sulfur indicator analyzed by synchrotron radiation XRF and XANES

Analyzing and understanding the effects of ambient pollution on plants is getting more and more attention as a topic of environmental biology.A method based on synchrotron radiation X-ray fluorescence and X-ray absorption near edge structure spectroscopy was established to analyze the sulfur concentration and speciation in mature camphor tree leaves (CTLs),which were sampled from 5 local fields in Shanghai,China.Annual SO2 concentration,SO42-concentration in atmospheric particulate,SO42-and sulfur concentration in soil were also analyzed to explore the relationship between ambient sulfur sources and the sulfur nutrient cycling in CTLs.Total sulfur concentration in mature camphor tree leaves was 766-1704 mg/kg.The mainly detected sulfur states and their corresponding compounds were +6 (sulfate,include inorganic sulfate and organic sulfate),+5.2 (sulfonate),+2.2 (suloxides),+0.6 (thiols and thiothers),+0.2 (organic sulfides).Total sulfur concentration was strongly correlated with sulfate proportion with a linear correlation coefficient up to 0.977,which suggested that sulfur accumulated in CTLs as sulfate form.Reduced sulfur compounds (organic sulfides,thiols,thioethers,sulfoxide and sulfonate) assimilation was sufficed to meet the nutrient requirement for growth at a balanced level around 526 mg/kg.The sulfate accumulation mainly caused by atmospheric sulfur pollution such as SO2 and airborne sulfate particulate instead of soil contamination.From urban to suburb place,sulfate in mature CTLs decreased as the atmospheric sulfur pollution reduced,but a dramatic increase presented near the seashore,where the marine sulfate emission and maritime activity pollution were significant.The sulfur concentration and speciation in mature CTLs effectively represented the long-term biological accumulation of atmospheric sulfur pollution in local environment.     

餐厨垃圾与污水污泥共消化产酸试验研究

研究了餐厨垃圾与污水污泥在不同混合比例、不同污泥停留时间条件下的共消化产酸效果。试验结果表明:当餐厨垃圾与污水污泥TS比为1∶3时,SRT=1 d的反应器酸化效率最高,且乙酸含量占优,产酸效果较佳;当TS之比为1∶1时,各反应器产酸量普遍高于1∶3时,其中SRT=5 d产酸反应器,最高酸化效率达5.94,产酸量最大,且乙酸含量占优,运行效果最佳。     

不同曝气强度下SBR系统污染物去除及N_2O排放研究

为考察曝气强度对SBR(A/O)系统N2O产生量的影响,试验采用人工合成废水长期驯化2个月后的污泥,分别考察了在0.2,0.4,0.6L/min三个曝气强度下对污染物的去除情况及N2O的产生情况。结果表明:在三种曝气强度下磷酸盐的平均去除率均可达95%⁹8%,低曝气强度下N2O释放量明显高于中等曝气强度,高曝气强度下N2O释放量最大,0.4L/min曝气强度下污染物去除率最好N2O释放量低,因此确定为最佳曝气强度。     

某热电厂职业病危害现状调查分析

目的 调查热电厂作业场所危害因素分布特点及浓度,结合作业人员职业健康检查结果,探究各类职业病危害因素对作业人员健康的影响.方法 采用现场职业卫生学调查对热电厂各车间职业病危害因素进行识别,依据作业场所各类职业病危害因素健康效应、现场检测浓度和强度,结合作业人员近2年职业健康检查结果进行对照分析.结果 作业场所各类化学物质检测浓度均符合国家卫生限值要求,粉尘个别检测值超过卫生限值要求;个体噪声检测强度超出卫生限值要求;近2年职业健康检查结果显示,每年均筛检出噪声岗位职业禁忌证患者,且血压升高和肺功能异常人数有所增加.结论 热电厂作业工人听力异常受作业场所高噪声影响较明显,肺功能异常可能受粉尘、氢氧化钠、盐酸、氨等职业病危害因素影响.     

臭气浓度无组织排放现场监测中常见问题的探讨

目前恶臭污染源排气及环境空气样品臭气浓度的测定一般采用三点比较式臭袋法。该方法侧重于臭气样品的实验室分析,对样品的现场采集部分未作具体要求。本文针对臭气浓度无组织排放现场监测中的常见问题,尤其是现有标准和规范中未明确的内容,从排放源的确认、生产工况的监督、气象条件的选择、监控点位的设置、监测频次的选择以及现场原始记录等方面进行了探讨,结合多年现场监测工作实践,提出了一些解决办法,使现场监测工作更具规范性和有效性。     

广西邦亮东黑冠长臂猿栖息地的气候资源分析

气候资源是影响动物行为、发育、存活、繁殖与分布等的重要因子。为了探明广西邦亮东黑冠长臂猿栖息地的气候环境特征,对其栖息地附近县(乡)的主要气象要素进行统计与分析。结果表明:广西邦亮东黑冠长臂猿栖息地年均日照时数为1 521.8小时,月变幅为25.44%;年均气温为19.1℃,最冷月平均气温为11.0℃,最热月平均气温为25.0℃;年均降雨量为1 606.3 mm,月变幅为86.05%;年均蒸发量为1 507.1 mm,月变幅为28.06%;年均相对湿度为80%,月变幅为2.60%;年均风速为1.5 m/s,月变幅为15.4%。