Influence of preparation method on structural,optical, magnetic,and adsorption properties of nano-NiFe2O4

Nickel ferrite (NiFe₂O₄) nanoparticles are prepared through different routes (microwave, co-precipitation, and pyrolysis) and tested for water purification applications through adsorption removal of an acid red dye B as a model organic pollutant. The characterizations of the prepared samples were done using XRD, FT-IR, SEM, TEM, BET, UV-Vis absorbance, Raman spectrum, and vibrating sample magnetometer (VSM). All samples showed an inverse spinel crystal structure. The obtained results pointed out to the effect of the synthetic route on the morphology, particle size, optical, and magnetic properties of the prepared ferrites. Magnetic measurements showed super-paramagnetic behavior for all samples. The magnetic saturation (M_s) of the sample prepared by pyrolysis, was found to possess the highest saturation value, 34.8 emu/g. Adsorption experiments were performed under the change in several parameters, such as pH, adsorbent dosage, and initial dye concentration. A dye removal percentage of 99% was reached under the optimum state. The isothermal adsorption of the acid red dye was investigated using several models, in which the experimental data could be best described by the Freundlich model. Several kinetic and equilibrium models were inspected by linear regression analysis and showed best fitting for the adsorption data through pseudo-second-order model. The calculated thermodynamic parameters indicated that the adsorption of acid red dye onto all the ferrite samples is a spontaneous and endothermic physical adsorption process.

     

Could curcumin ameliorate titanium dioxide nanoparticles effect on the heart? A histopathological,immunohistochemical, and genotoxic study

Environmental Science and Pollution Research - The evaluation of the toxicological effects of titanium dioxide nanoparticles (TiO2NPs) is increasingly important due to their growing occupational...     

Evaluation of hydroxyapatite/poly(acrylamide-acrylic acid) for sorptive removal of strontium ions from aqueous solution

Environmental Science and Pollution Research - A composite polymer, hydroxyapatite/poly(acrylamide-acrylic acid), was synthesized by gamma-induced polymerization. The factors affecting the sorption...     

Disposal of obsolete pesticides,the case of Ethiopia

Ethiopia has accumulated obsolete pesticide stocks since pesticides were first imported in the 1960s due to prolonged storage of pesticides, inappropriate storage conditions because of poor storage facilities, the lack of trained staff and lack of national legislation for pesticide registration and monitoring system of pesticide use in the country. The first pesticide inventory conducted in 1995 led by FAO in collaboration with the government of Ethiopia had identified about 426 tonnes of obsolete pesticides mainly on state-owned agricultural farms and held by the Ministry of Health. However, these stocks have increased to over 1500 tonnes (including 200 active ingredients) as found in a detailed inventory conducted in 1999. The stocks included organochlorines (258.3 tonnes), organophosphates (155.4 tonnes), carbamates (58.5 tonnes), coumarines (14.9 tonnes), inorganics (30.2 tonnes), others (257.2 tonnes), mixed pesticides (70.4 tonnes) and unknown pesticides (307.1 tonnes) including both liquid and solid state formulations. The obsolete organochlorine pesticides stocks were mostly pesticides such as chlordane, DDT, dieldrin and lindane that are banned or restricted in most countries. The highest amount of a single active ingredient found was the organophosphate insecticide pirimiphos methyl (172.1 tonnes). All these stocks were disposed of in the first phase of disposal in Finland (during 2000–2003) by the hazardous waste management company Ekokem at a cost of about US$ 4.44 million. Another 1000 tonnes of obsolete pesticides have been identified and are currently being eliminated in a second disposal phase at a total cost of US$ 8 135 500. Along with the disposal process, a number of activities are being implemented to prevent future pesticides accumulation. These activities include the development and enforcement of pesticide policy, the implementation of Integrated Pest Management (IPM) and Integrated Vector Management (IVM), capacity building in terms of providing professional trainings, creating awareness among stakeholders on the environmental and human health hazard posed by obsolete pesticides as well as other actions to prevent their accumulation and enforcement of national legislations and policies related to pesticides use. However, pesticide use in the country is increasing. For instance, 12 years of pesticides import data (1996–2007) by the Ministry of Agriculture shows that 2973 tonnes of pesticides were imported between 1996–1998, 3670 tonnes between 1999–2001, 5079 tonnes between 2002–2004 and 8302 tonnes between 2005–2007. Moreover, 6 years of insecticide import data (1996/97–2001/02) by the Ministry of Health shows that around 919 tonnes of insecticides were imported between 1996/97–1997/98, 812 tonnes between 1998/99–1999/00 and 970 tonnes between 2000/01–2001/02 for malaria and other vector borne diseases control.     

Kinetics of carbon dioxide absorption into mixed aqueous solutions of MDEA and MEA using a laminar jet apparatus and a numerically solved 2D absorption rate/kinetics model

New comprehensive numerically solved 1D and 2D absorption rate/kinetics models have been developed, for the first time, to interpret the experimental kinetic data obtained with a laminar jet apparatus for the absorption of carbon dioxide (CO₂) in CO₂ loaded mixed solutions of mixed amine system of methyldiethanolamine (MDEA) and monoethanolamine (MEA). Three MDEA/MEA weight ratios ranging from 27/03 to 23/07, over a concentration range of 2.316–1.996 kmol/m³ for MDEA and of 0.490–1.147 kmol/m³ for MEA were studied. The models take into account the coupling between chemical equilibrium, mass transfer, and the chemical kinetics of all possible chemical reactions involved in the CO₂ reaction with MDEA/MEA solvent. The partial differential equations of the 1D model were solved by two numerical techniques; the finite difference method (FDM) based on in-house coded Barakat–Clark scheme and the finite element method (FEM) based on COMSOL software. The FEM comprehensive model was then used to solve the set of partial differential equations in the 2D cylindrical coordinate system setting. Both FDM and FEM produced very accurate results for both the 1D and 2D models, which were much better than our previously published simplified model. The reaction rate constant obtained for MEA blended into MDEA at 298–333 K was k_MEA = 5.127 × 10⁸ exp(−3373.8/T). In addition, the 2D model, for the first time, has provided the concentration profiles of all the species in both the radial and axial directions of the laminar jet, thereby enabling an understanding of the correct sequence in which the reaction steps involved in the reactive absorption of CO₂ in aqueous mixed amines occur.     

Environmental Assessments in the Oil and Gas Industry

The general public, government regulators, and environmental organizations are increasingly demanding industries to reduce their environmental impacts and report progress. This in turn resulted in numerous requirements for reporting environmental data. Environmental assessments are a useful tool in gathering and documenting this data. The assessments also assist decision makers to quantify impacts of their activities and plan for appropriate mitigation measures. There are different types of environmental assessments, each having specific purpose(s) and addressing specific audience(s). This paper gives an overview of common environmental concerns associated with oil and gas industry and shares insights on types of environmental assessments that are widely used. It discusses general methodologies to define the scope, approach, measurement standards, and reporting. Potential challenges encountered in conducting these assessments in an international arena and under a wide variety of regulatory requirements are addressed. Practical approach in execution of these assessments is described here, and strategy in dealing with the challenges is presented.     

Effectiveness of EMS in Tunisian companies: framework and implementation process based on ISO 14001 standard

This paper reports environmental analysis results of food and tannery Tunisian companies to identify the features of environmental management system (EMS) that is implemented recently. EMS via ISO 14001 has become one of the principal tools used by companies to handle environmental aspects and impacts through their various complex activities interacted with environment. While several companies have implemented and maintained a formal EMS, it has related mainly to their benefits in short term without responding to the sustainable development recommendations and practices. This study focuses on the strong linkage between the EMS effectiveness of food–tannery Tunisian companies and sustainability. A proactive environmental management approach is proposed and adopts a qualitative and quantitative assessment for factor analysis. It provides a strategic EMS framework and principles for sustainability to evolve the future enterprises’ benefits that has a clear influence on environmental performance in long term.     

Restoration and sequestration of carbon and nitrogen in the degraded northern coastal area in Nile Delta,Egypt for climate change mitigation

Most of coastal area in Nile Delta, Egypt, is salt-affected soils and have low carbon (C) and nitrogen (N) inputs as a result of declining vegetation growth and low net primary production. Therefore, this study amid to compare between C and N pools in degraded (uncultivated and salt-affected soil) and restored (cultivated and reclaimed 20 years ago) locations in North Nile Delta. and to examine the impact of cultivation on sequestering C and N pools in this area as one of the most important methods for mitigating climate change impacts. C and N pools increased significantly in surface soil from 2.99 and 0.43 Mgh^?1 in uncultivated sites to 19.26 and 1.66 Mgh^?1 in cultivated ones as salinity was reduced and net primary production was increased due to leaching and reclamation. Particulate (associated with sand) and nonparticulate (associated with clay +silt) soil organic C or N was significantly higher cultivated sites. In addition, nonparticulate organic C or N was lower than particulate part indicating and supporting the strong relationship between organic matter and clay. The sequestration rate (in approximately 1 m profile) was 1.69 and 0.14 Mgh^?1 yr.^?1 C and N pools respectively. Although the cultivation is leading to loss of organic matter in some areas; C and N in this coastal area are partially restored and stored. Therefore, restoration and appropriate management practices will lead to mitigate the negative impacts of climate change in this area.     

A novel one-step synthesis for carbon-based nanomaterials from polyethylene terephthalate (PET) bottles waste

Nowadays our planet suffers from an accumulation of plastic products that have the potential to cause great harm to the environment in the form of air, water, and land pollution. Plastic water bottles have become a great problem in the environment because of the large numbers consumed throughout the world. Certain types of plastic bottles can be recycled but most of them are not. This paper describes an economical solvent-free process that converts polyethylene terephthalate (PET) bottles waste into carbon nanostructure materials via thermal dissociation in a closed system under autogenic pressure together with additives and/or catalyst, which can act as cluster nuclei for carbon nanostructure materials such as fullerenes and carbon nanotubes. This research succeeded in producing and controlling the microstructure of various forms of carbon nanoparticles from the PET waste by optimizing the preparation parameters in terms of time, additives, and amounts of catalyst.

Implications: Plastic water bottles are becoming a growing segment of the municipal solid waste stream in the world; some are recycled but many are left in landfill sites. Recycling PET bottles waste can positively impact the environment in several ways: for instance, reduced waste, resource conservation, energy conservation, reduced greenhouse gas emissions, and decreasing the amount of pollution in air and water sources. The main novelty of the present work is based on the acquisition of high-value carbon-based nanomaterials from PET waste by a simple solvent-free chemical technique. Thus, the prepared materials are considered to be promising, cheap, eco-friendly materials that may find use in different applications.     

Are deep eutectic solvents benign or toxic?

In continuation of investigation for environmentally benign protocol for new solvents termed deep eutectic solvents (DESs), it is herein reported results concerning the toxicity and cytotoxicity of choline chloride (ChCl) based DESs with four hydrogen bond donors including glycerine, ethylene glycol, triethylene glycol and urea. The toxicity was investigated using two Gram positive bacteria Bacillus subtilis and Staphylococcus aureus, and two Gram negative bacteria Escherichia coli and Pseudomonas aeruginosa. The cytotoxicity effect was tested using the Artemia salina leach. It was found that there was no toxic effect for the tested DESs on all of the studied bacteria confirming their benign effects on these bacteria. Nevertheless, it was found that the cytotoxicity of DESs was much higher than their individual components (e.g. glycerine, ChCl) indicating that their toxicological behavior is different. For our best knowledge this is the first time that toxicity and cytotoxicity of DESs were studied. The toxicity and cytotoxicity of DESs varied depending on the structure of components. Careful usage of the terms non-toxicity and biodegradability must be considered. More investigation on this matter is required.