装配式凸轮轴滚花连接机理及连接强度研究

装配式凸轮轴与传统凸轮轴相比具有重量轻、加工成本低、材料利用合理等优点。是新型的凸轮轴制造技术, 具有广泛的发展空间。而其连接方法是装配式凸轮轴制造的关键技术。本文基于相异材料的咬合连接理论, 提出了滚花式塑性变形连接机理, 对不同材料、尺寸的滚花式凸轮轴静连接强度及疲劳强度进行了实验研究, 同时分析了滚花连接的不同连接状况以及凸轮压装张紧应力。     

TA15合金的热变形行为及加工图

研究了TA15合金的热模拟压缩实验。结果表明：变形温度的升高和应变速率的减小使峰值应力和稳态应力显著降低，变形温度会影响进入稳态流动所需变形量。以热模拟压缩实验为基础，建立的加工图表明：TA15合金高温变形时存在2个非稳定区域，一个是变形温度1300K以上和应变速率10．0s^-1以上的区域，另一个是变形温度1200K以下和应变速率0．006s^-1～1．995s^-1之间的区域。同时，建立的TA15合金高温变形时的流动应力模型表征了变形温度、应变速率和变形程度对流动应力的影响，模型的计算精度较高。     

Structural stability of single-layered LaNi4.25Al0.75 film and its electrochemical hydrogen-storage properties

AB5-based hydrogen storage thin fdms （LaNi4.25Al0.75）, deposited on Cu substrate by dc magnetron sputtering were investigated in this study. X-ray diffraction （XRD） revealed that the microstructure of the layer was in crystal form. SEM and AFM analyses proved that the film appeared to be rather rough with numerous randomly sized pores of approximately 15-40 in nm diameter. Structural stability of the film was examined by the combined analyses of DSC, XRD, and SEM, which indicated that this film maintained its structural stability below 500 K or so, and a network structure was observed on the film after being heated at 700 K for 30 min. Electrochemical hydrogen-storage properties of the films were investigated by simulated battery tests. It was found that single-layered LaNi4.25A10.75 film exhibited electrochemical hydrogen-storage properties similar to typical AB5 alloys in bulk, and the maximum discharge capacity of the film was about 220 mAh/g. After 20 charge/discharge cycles, small needle-shaped aluminium oxide was formed on some fractions of the film surface.     

Ambient and high-temperature thermal conductivity of thermal sprayed coatings

Aside from its importance as a design parameter for thermal barrier coatings, measuring thermal conductivity of thermal sprayed coatings itself provides a unique method to critically characterize the nature, quantity, and anisotropy of the defect morphologies in these splat-based coatings. In this paper, the authors present a systematic assessment of thermal conductivity of wide range using the flash diffusivity technique. For the case of plasma sprayed yttria-stabilized zirconia (YSZ), coatings obtained from wide-ranging initial powder morphologies as well as those fabricated under different particle states were characterized. Both in-plane and through-thickness properties were obtained. Other material systems that were considered include: metallic alloys and semiconductors of interests. Issues such as reproducibility and reliability in measurements were also considered and assessed. Finally, work in collaboration with the Oak Ridge National Laboratory (ORNL) for alternate approaches to characterization of thermal conductivity as well as high-temperature measurements was performed. This article was originally published inBuilding on 100 Years of Success, Proceedings of the 2006 International Thermal Spray Conference (Seattle, WA), May 15–18, 2006, B.R. Marple, M.M. Hyland, Y.-Ch. Lau, R.S. Lima, and J. Voyer, Ed., ASM International, Materials Park, OH, 2006.     

双纵模热稳频激光源的模糊PID控制研究

为了满足激光拍频干涉仪所需要的高的频率稳定性的激光光源,研究了双纵模热稳频的机理。以控制激光管放电电流为主要热控制方式及自创的对激光管进行感应加热作为微量控制的先进方法为控制手段,采用模糊控制理论与专家系统相结合的控制策略,建立模糊PID控制器,对双纵模激光源进行稳频。无须建立被控对象数学模型,对时滞、非线形和时变性具有一定的适应能力。实验结果显示,稳频精度无明显变化,但预热时间明显缩短,抗干扰性明显增强,强干扰后也能迅速稳频。     

Robust,healable and hydrophobically recoverable polydimethylsiloxane based supramolecular material with dual-activate hard segment

Science China Technological Sciences - In this paper, a novel dual-activate hard segment strategy is proposed for the fabrication of polydimethylsiloxane (PDMS) based supramolecular polymer...     

温度梯度下XLPE同轴和平板结构试样空间电荷行为对比性研究

直流电场下,电缆绝缘中的温度梯度效应导致绝缘材料空间电荷行为复杂,影响电缆系统长期运行的可靠性.目前,温度梯度下电缆绝缘空间电荷特性的研究多集中于平板结构的切片试样,但平板结构切片试样的空间电荷测量能否反映真实电缆绝缘中的空间电荷特性尚缺乏有力证明.该研究测量并分析了温度梯度场下2种不同结构(同轴结构、平板结构)10 kV交联聚乙烯(cross-linked polyethylene,XLPE)试样的空间电荷演变特性以及电场分布行为,基于去压状态下的空间电荷行为,计算了XLPE同轴电缆和切片试样的载流子迁移率以及陷阱深度分布,并对2种结构XLPE试样的空间电荷行为和电荷特性参数进行了对比性研究.该研究结果表明同轴结构和温度梯度效应均会加剧XLPE电缆外半导电层附近的空间电荷积聚,除了结构因素的影响,温度梯度场下XLPE同轴电缆和平板切片试样的空间电荷演变规律以及电荷特性参数均呈现出等效规律.     

500kV海底电缆油泵站远程监控系统研究

海底电缆油泵站作为海南联网工程的重要组成部分,满足3根海底电缆用油及压力需求.油泵站系统投运9年,出现多起故障,当海底电缆油泵站控制系统故障后,无法监控油泵站的运行状况,无法手动对油泵站系统进行就地操作及了解海底电缆的供油情况.研究海底电缆油泵站的工作原理,打破原有代码屏蔽,开发一套海底电缆油泵站远程监控系统,实现对油泵站的远程监控.     

Simulated Microgravity Inhibits the Proliferation of Chang Liver Cells by Attenuation of the Major Cell Cycle Regulators and Cytoskeletal Proteins

Simulated microgravity (SMG) induced the changes in cell proliferation and cytoskeleton organization, which plays an important factor in various cellular processes. The inhibition in cell cycle progression has been considered to be one of the main causes of proliferation inhibition in cells under SMG, but their mechanisms are still not fully understood. This study aimed to evaluate the effects of SMG on the proliferative ability and cytoskeleton changes of Chang Liver Cells (CCL-13). CCL-13 cells were induced SMG by 3D clinostat for 72 h, while the control group were treated in normal gravity at the same time. The results showed that SMG reduced CCL-13 cell proliferation by an increase in the number of CCL-13 cells in G0/G1 phase. This cell cycle phase arrest of CCL-13 cells was due to a downregulation of cell cycle-related proteins, such as cyclin A1 and A2, cyclin D1, and cyclin-dependent kinase 6 (Cdk6). SMG-exposed CCL-13 cells also exhibited a downregulation of α-tubulin 3 and β-actin which induced the cytoskeleton reorganization. These results suggested that the inhibited proliferation of SMG-exposed CCL-13 cells could be associate with the attenuation of major cell cycle regulators and main cytoskeletal proteins.     

二元复合体系驱替聚驱后剩余油作用机理研究

海上稠油油田在聚驱之后仍然会有很大一部分剩余油,而聚合物和表活剂组成的二元复合体系用来驱替聚驱后残留剩余油效果显著,为了在微观和宏观上进一步研究二元复合体系是如何动用聚驱后的剩余油,采取微观可视化实验、4层非均质岩心驱替实验、二维平面非均质岩心的驱油实验进行研究,通过结果分析得出二元复合体系可以有效地驱替簇状、柱状剩余油以及附着在岩壁表面的膜状剩余油,并且二元复合体系与油产生超低界面张力,其会动用一部分水驱和聚驱已波及到但无法采出的残余油,进而提高采收率.